Overview
Spec Sheet
Shipping/Freight
Equipment Description
Spec Sheet
  • Engine Specifications
    • Engine Model: Cat C7.1
    • Net Power: 165 HP
    • Displacement: 433 cubic inches
    • Bore: 4.02 inches
    • Stroke: 5.31 inches
  • Operating Specifications
    • Operating Weight: 45,300 lbs
    • Fuel Capacity: 104 gallons
    • Cooling System Fluid Capacity: 11 gallons
    • Hydraulic System Fluid Capacity: 38 gallons
    • Engine Oil Capacity: 5.28 gallons
    • Transmission Oil Capacity: 12 gallons
    • Front Axle Oil Capacity: 7 gallons
    • Rear Axle Oil Capacity: 17 gallons
  • Transmission
    • Transmission Type: Power Shift
    • Number of Forward Gears: 8
    • Number of Reverse Gears: 6
    • Top Forward Speed: 28 mph
    • Top Reverse Speed: 22 mph
  • Blade Dimensions
    • Blade Width: 12 feet
    • Blade Height: 24 inches
    • Blade Cutting Edge Angle: 42 degrees
    • Blade Tilt Angle: 25 degrees
    • Blade Arc Radius: 16 inches
  • Performance
    • Turning Radius: 23 feet (outside front tires)
    • Max Travel Speed: 28 mph
    • Max Ripper Penetration Depth: 16 inches
    • Ripper Shank Hold Spacing: 19 inches
  • Dimensions
    • Overall Length (without attachments): 33 feet
    • Overall Width: 8 feet
    • Overall Height: 10 feet
    • Ground Clearance: 14 inches
    • Wheelbase: 20 feet
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.

2000 Cat 140H

earth moving and construction

$165,000 USD
 
Instant Quote Eligible Listing - CLICK HERE!
Hamre Equipment Co. Inc.
CONTACT INFO
Name:
Lee Hamre
Phone:

ADDRESS
Hamre Equipment Co. Inc.
3930 Esplanade
ChicoCalifornia 95973
ATTRIBUTES
STOCK #:
150115407962
YEAR:
2000
Manufacturer:
MODEL #:
SERIAL #:
2ZK04983
CONDITION:
Used
HOUR METER:
8719
LOCATION:
California [95973]
POST DATE:
10/15/2025
  • Engine Specifications
    • Engine Model: Cat C7.1
    • Net Power: 165 HP
    • Displacement: 433 cubic inches
    • Bore: 4.02 inches
    • Stroke: 5.31 inches
  • Operating Specifications
    • Operating Weight: 45,300 lbs
    • Fuel Capacity: 104 gallons
    • Cooling System Fluid Capacity: 11 gallons
    • Hydraulic System Fluid Capacity: 38 gallons
    • Engine Oil Capacity: 5.28 gallons
    • Transmission Oil Capacity: 12 gallons
    • Front Axle Oil Capacity: 7 gallons
    • Rear Axle Oil Capacity: 17 gallons
  • Transmission
    • Transmission Type: Power Shift
    • Number of Forward Gears: 8
    • Number of Reverse Gears: 6
    • Top Forward Speed: 28 mph
    • Top Reverse Speed: 22 mph
  • Blade Dimensions
    • Blade Width: 12 feet
    • Blade Height: 24 inches
    • Blade Cutting Edge Angle: 42 degrees
    • Blade Tilt Angle: 25 degrees
    • Blade Arc Radius: 16 inches
  • Performance
    • Turning Radius: 23 feet (outside front tires)
    • Max Travel Speed: 28 mph
    • Max Ripper Penetration Depth: 16 inches
    • Ripper Shank Hold Spacing: 19 inches
  • Dimensions
    • Overall Length (without attachments): 33 feet
    • Overall Width: 8 feet
    • Overall Height: 10 feet
    • Ground Clearance: 14 inches
    • Wheelbase: 20 feet
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.


similar equipment based on your search
National Equipment, LLC
 
Used
PRICE
$87,500 USD
Get Quote
Get Brochure
DETAILS
CONTACT
FINANCE
STK#:
0501
MAKE:
Cat
MODEL:
140H
Location:
California
National Equipment, LLC
: 559-517-3272
12201 Hwy 99 (at Ave 12)
Madera, CA 93638

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Finance at $/mo
National Equipment, LLC
 
Used
PRICE
$24,500 USD
Get Quote
Get Brochure
DETAILS
DESCRIPTION
CONTACT
FINANCE
STK#:
630
MAKE:
Cat
MODEL:
CB-434C
Location:
California
Canopy, 56" Double Drum Vibratory Roller, Water System,
National Equipment, LLC
: 559-517-3272
12201 Hwy 99 (at Ave 12)
Madera, CA 93638

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Finance at $/mo
National Equipment, LLC
 
Used
PRICE
$52,500 USD
Get Quote
Get Brochure
DETAILS
CONTACT
FINANCE
STK#:
0768
MAKE:
Cat
MODEL:
CS-563E
Location:
California
National Equipment, LLC
: 559-517-3272
12201 Hwy 99 (at Ave 12)
Madera, CA 93638

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Finance at $/mo
National Equipment, LLC
 
Used
PRICE
$45,000 USD
Get Quote
Get Brochure
DETAILS
CONTACT
FINANCE
STK#:
791
MAKE:
Cat
MODEL:
330CL
Location:
California
National Equipment, LLC
: 559-517-3272
12201 Hwy 99 (at Ave 12)
Madera, CA 93638

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Finance at $/mo
National Equipment, LLC
 
Used
PRICE
$29,500 USD
Get Quote
Get Brochure
DETAILS
DESCRIPTION
CONTACT
FINANCE
STK#:
752
MAKE:
Cat
MODEL:
416C
Location:
California
1998 CAT 416C 2wd, GP Bucket, Extendahoe,
National Equipment, LLC
: 559-517-3272
12201 Hwy 99 (at Ave 12)
Madera, CA 93638

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Finance at $/mo
National Equipment, LLC
 
Used
PRICE
$22,500 USD
Get Quote
Get Brochure
DETAILS
CONTACT
FINANCE
STK#:
627
MAKE:
Cat
MODEL:
CP-323C
Location:
California
National Equipment, LLC
: 559-517-3272
12201 Hwy 99 (at Ave 12)
Madera, CA 93638

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Finance at $/mo
National Equipment, LLC
 
Used
PRICE
$22,500 USD
Get Quote
Get Brochure
DETAILS
DESCRIPTION
CONTACT
FINANCE
STK#:
0321
MAKE:
Cat
MODEL:
AP-1055B
Location:
California
10-20' screed, CAT 3116,
National Equipment, LLC
: 559-517-3272
12201 Hwy 99 (at Ave 12)
Madera, CA 93638

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Finance at $/mo
National Equipment, LLC
 
Used
PRICE
$39,500 USD
Get Quote
Get Brochure
DETAILS
CONTACT
FINANCE
STK#:
0480
MAKE:
Cat
MODEL:
D5M XL
Location:
California
National Equipment, LLC
: 559-517-3272
12201 Hwy 99 (at Ave 12)
Madera, CA 93638

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Finance at $/mo
National Equipment, LLC
 
Used
PRICE
$29,500 USD
Get Quote
Get Brochure
DETAILS
DESCRIPTION
CONTACT
FINANCE
STK#:
273
MAKE:
Cat
MODEL:
313C
Location:
California
Enclosed Cab, Aux Hydraulics, Hammer/Breaker Control,
National Equipment, LLC
: 559-517-3272
12201 Hwy 99 (at Ave 12)
Madera, CA 93638

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Finance at $/mo
National Equipment, LLC
 
Used
PRICE
$39,500 USD
Get Quote
Get Brochure
DETAILS
CONTACT
FINANCE
STK#:
619
MAKE:
Cat
MODEL:
938G
Location:
California
National Equipment, LLC
: 559-517-3272
12201 Hwy 99 (at Ave 12)
Madera, CA 93638

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Finance at $/mo

Your location is Columbus, OH. Modify

Call
Get Quote
Equipment Finder Equipment
finder
*Payment stated above assumes a secured commercial loan transaction available to highly qualified applicants. Commercial financing provided or arranged by Strada Capital Corporation dba Mazo Capital Solutions pursuant to California Finance Lender License #603G255. Equal opportunity lender. Not all applicants will qualify. Applicant credit profile including FICO is used for credit review. Actual terms available may vary depending on applicant and/or guarantor credit profile(s), equipment type and additional approval conditions. Older assets or more may require increased finance charges. Financing approval will require pledge of collateral as security.
Please correct the following