Overview
Spec Sheet
Shipping/Freight
Equipment Description
1726 Hours 2013 used JUNGHEINRICH ETR 345 for sale. Global has over 2000 pieces of used equipment in stock. Inquire today about Stock #EQC026271, Stock Number: EQC026271, Make: JUNGHEINRICH, Model: ETR 345, Year: 2013, Auxilliary Hydralic Valves: 0, Capacity: 4500 Lbs, Carriage: S/S, Carriage Width: 33.00", Fork Length: 42.00", Fork Taper: Pallet, Fork Thickness: 1.50", Fork Width: 4.00", Full Free Height: 0.00", Load Center: 24", Mast: Triplex, Max Fork Height: 242.00", Overall Lowered Height: 107.00", Operator Protection: Open Overhead Guard, Rear Tires: Smooth Cushion, Voltage: 36V, Warranty: Factory, Hours: 1726, Chassis: 2 Wheel Drive, Fuel: Electric
Spec Sheet
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.

  • Model Number: ETR 345
  • Manufacturer: Jungheinrich
  • Type: Forklift
  • Subtype: Electric Narrow Aisle Single Reach
  • Fuel Type: Electric
General Specifications:
  • Operator Type: Stand-Up Rider
  • Drive Control: AC Technology
  • Steering System: Electric Power Steering
Dimensions:
  • Overall Length: Approximately 82 inches
  • Overall Width: Approximately 42 inches
  • Height to Top of Overhead Guard: Approximately 89 inches
  • Wheelbase: Approximately 60 inches
  • Ground Clearance: Approximately 3 inches
  • Fork Length: Varies
Performance:
  • Load Capacity: Approximately 4,500 lbs
  • Travel Speed Loaded/Unloaded: Approximately 7.5 mph / 8 mph
  • Lift Speed Loaded/Unloaded: Approximately 70 feet/minute / 100 feet/minute
  • Lowering Speed Loaded/Unloaded: Approximately 95 feet/minute / 85 feet/minute
Battery and Power:
  • Battery Voltage: 36V
  • Battery Capacity: Varies
  • Power Supply: Electrical
Weight and Wheels:
  • Total Weight without Load: Approximately 8,800 lbs
  • Number of Wheels: 3 (2 rear, 1 front)
  • Tire Type: Rubber

2013 Jungheinrich ETR 345

electric narrow aisle single reach electric

$13,000 USD
 
Instant Quote Eligible Listing - CLICK HERE!
CONTACT INFO
Name:
Sales Rep

ADDRESS
Global Fleet Solutions
17300 W Valley Hwy
SeattleWashington 98188
ATTRIBUTES
STOCK #:
EQC026271
YEAR:
2013
Manufacturer:
MODEL #:
CAPACITY:
4500
FUEL:
MAST TYPE:
MAST HEIGHT:
242 in
SERIAL #:
7JR3090018
SIDE SHIFTER:
Yes
HOUR METER:
1726
UNIT LOCATION:
POST DATE:
2/2/2026
Reviews
Useful
Not

Having spent some time using the Jungheinrich ETR 345 in our warehouse, I can say it really shines in tight spaces where maneuverability is key. The narrow aisle design is a game-changer, allowing us to maximize storage without feeling cramped. I remember the first time I drove it around—I was impressed by how smooth the steering was and how quiet it ran compared to our older models. This electric forklift has definitely cut down on noise pollution during those early morning shifts, which is a bonus. Overall, it’s been a solid addition to our fleet, making the daily tasks a bit easier without sacrificing power or efficiency.



Review by Mark Stevens (8/22/2025)

  • Model Number: ETR 345
  • Manufacturer: Jungheinrich
  • Type: Forklift
  • Subtype: Electric Narrow Aisle Single Reach
  • Fuel Type: Electric
General Specifications:
  • Operator Type: Stand-Up Rider
  • Drive Control: AC Technology
  • Steering System: Electric Power Steering
Dimensions:
  • Overall Length: Approximately 82 inches
  • Overall Width: Approximately 42 inches
  • Height to Top of Overhead Guard: Approximately 89 inches
  • Wheelbase: Approximately 60 inches
  • Ground Clearance: Approximately 3 inches
  • Fork Length: Varies
Performance:
  • Load Capacity: Approximately 4,500 lbs
  • Travel Speed Loaded/Unloaded: Approximately 7.5 mph / 8 mph
  • Lift Speed Loaded/Unloaded: Approximately 70 feet/minute / 100 feet/minute
  • Lowering Speed Loaded/Unloaded: Approximately 95 feet/minute / 85 feet/minute
Battery and Power:
  • Battery Voltage: 36V
  • Battery Capacity: Varies
  • Power Supply: Electrical
Weight and Wheels:
  • Total Weight without Load: Approximately 8,800 lbs
  • Number of Wheels: 3 (2 rear, 1 front)
  • Tire Type: Rubber
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.


Call
Get Quote
Equipment Finder Equipment
finder
*All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Please correct the following