Overview
Spec Sheet
Shipping/Freight
Equipment Description
Ex Government, Canopy, Manual Angle Blade, Rear MS Ripper, Powershift Trans.
Spec Sheet
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.

  • Engine
    • Manufacturer: Caterpillar
    • Model: Cat D6C
    • Net Power: 140 HP
    • Engine Type: Diesel
    • Displacement: 640 cubic inches
    • Number of Cylinders: 6
  • Dimensions
    • Overall Length: 190 inches
    • Width Over Tracks: 91 inches
    • Height: 115 inches
    • Ground Clearance: 12 inches
    • Track Length on Ground: 100 inches
    • Track Gauge: 71 inches
  • Operational
    • Operating Weight: 29,800 lbs
    • Fuel Capacity: 90 gallons
    • Hydraulic Fluid Capacity: 35 gallons
    • Transmission: Powershift
    • Speed - Forward: 6.5 mph
    • Speed - Reverse: 7.5 mph
  • Undercarriage
    • Shoe Width: 22 inches
    • Track Shoes (per side): 41
    • Track Rollers (per side): 7
    • Track Type: Sealed and Lubricated
  • Performance
    • Drawbar Pull: 32,000 lbs
    • Blade Capacity: 4.27 cubic yards
  • Hydraulics
    • Pump Flow Capacity: 25 gallons/min
    • Relief Valve Pressure: 3,500 psi

1972 Cat D6C

earth moving and construction

$29,000 USD
 
Instant Quote Eligible Listing - CLICK HERE!
CONTACT INFO
Name:
Jim Gagliardi
Phone:

ADDRESS
National Equipment, LLC
12201 Hwy 99 (at Ave 12)
MaderaCalifornia 93638
ATTRIBUTES
STOCK #:
0673
YEAR:
1972
Manufacturer:
MODEL #:
CONDITION:
Used
UNIT LOCATION:
California [93638]
POST DATE:
2/23/2026
  • Engine
    • Manufacturer: Caterpillar
    • Model: Cat D6C
    • Net Power: 140 HP
    • Engine Type: Diesel
    • Displacement: 640 cubic inches
    • Number of Cylinders: 6
  • Dimensions
    • Overall Length: 190 inches
    • Width Over Tracks: 91 inches
    • Height: 115 inches
    • Ground Clearance: 12 inches
    • Track Length on Ground: 100 inches
    • Track Gauge: 71 inches
  • Operational
    • Operating Weight: 29,800 lbs
    • Fuel Capacity: 90 gallons
    • Hydraulic Fluid Capacity: 35 gallons
    • Transmission: Powershift
    • Speed - Forward: 6.5 mph
    • Speed - Reverse: 7.5 mph
  • Undercarriage
    • Shoe Width: 22 inches
    • Track Shoes (per side): 41
    • Track Rollers (per side): 7
    • Track Type: Sealed and Lubricated
  • Performance
    • Drawbar Pull: 32,000 lbs
    • Blade Capacity: 4.27 cubic yards
  • Hydraulics
    • Pump Flow Capacity: 25 gallons/min
    • Relief Valve Pressure: 3,500 psi
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.


Call
Get Quote
Equipment Finder Equipment
finder
*All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Please correct the following