Overview
Spec Sheet
Shipping/Freight
Equipment Description
KOMATSU D21P-5 DOZER OPEN ROPS 6 WAY BLADE DIESEL ENGINE 1470 HOURS ON METER - HOURS UNKNOWN
Spec Sheet
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.

  • Model: D21P-5
  • Manufacturer: Komatsu
  • Subtype: Earth Moving and Construction
  • Engine Specifications:
    • Mitsubishi S4L2
    • 4-cylinder, 4-cycle diesel
    • Displacement: 134.1 cu in
    • Net Power: 39 HP
    • Gross Power: 40.5 HP
  • Operating Specifications:
    • Operating Weight: 10,021 lbs
    • Fuel Capacity: 14.3 gallons
    • Ground Pressure: 4.2 psi
  • Dimensions:
    • Overall Length: 10 ft 8 in
    • Overall Width: 7 ft 9 in
    • Height to Top of Cab: 8 ft 1 in
    • Ground Clearance: 1 ft
  • Track System:
    • Track Length on Ground: 5 ft 11 in
    • Width of Track: 1 ft 8 in
    • Number of Track Rollers per Side: 5
    • Track Gauge: 4 ft 9 in
  • Blade Specifications:
    • Blade Width: 8 ft 4 in
    • Blade Height: 2 ft 3 in
    • Blade Capacity: 1.5 cubic yards
    • Maximum Angle (both directions): 25 degrees
  • Performance:
    • Travel Speed - Forward: 5.6 mph
    • Travel Speed - Reverse: 7.8 mph

Komatsu D21P-5

earth moving and construction

$19,990 USD
 
Instant Quote Eligible Listing - CLICK HERE!
CONTACT INFO
Name:
Keith Hetrick Jr.

ADDRESS
Niagara Frontier Equipment Sales, Inc.
4060 Lake Avenue
LockportNew York 14094
ATTRIBUTES
STOCK #:
41017
Manufacturer:
MODEL #:
SERIAL #:
46603
CONDITION:
Used
HOUR METER:
1470
UNIT LOCATION:
New York [14094]
POST DATE:
1/21/2026
  • Model: D21P-5
  • Manufacturer: Komatsu
  • Subtype: Earth Moving and Construction
  • Engine Specifications:
    • Mitsubishi S4L2
    • 4-cylinder, 4-cycle diesel
    • Displacement: 134.1 cu in
    • Net Power: 39 HP
    • Gross Power: 40.5 HP
  • Operating Specifications:
    • Operating Weight: 10,021 lbs
    • Fuel Capacity: 14.3 gallons
    • Ground Pressure: 4.2 psi
  • Dimensions:
    • Overall Length: 10 ft 8 in
    • Overall Width: 7 ft 9 in
    • Height to Top of Cab: 8 ft 1 in
    • Ground Clearance: 1 ft
  • Track System:
    • Track Length on Ground: 5 ft 11 in
    • Width of Track: 1 ft 8 in
    • Number of Track Rollers per Side: 5
    • Track Gauge: 4 ft 9 in
  • Blade Specifications:
    • Blade Width: 8 ft 4 in
    • Blade Height: 2 ft 3 in
    • Blade Capacity: 1.5 cubic yards
    • Maximum Angle (both directions): 25 degrees
  • Performance:
    • Travel Speed - Forward: 5.6 mph
    • Travel Speed - Reverse: 7.8 mph
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.


Call
Get Quote
Equipment Finder Equipment
finder
*All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Please correct the following