Overview
Spec Sheet
Shipping/Freight
Equipment Description
Enclosed Cab, 14' Blade, Push Block, Rear Ripper, CAT 3306 DI Turbo, 17.5R25 Tires, Made in USA,
Spec Sheet
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.

  • Engine Specifications
    • Engine Model: Cat C7.1
    • Net Power: 165 HP
    • Displacement: 433 cubic inches
    • Bore: 4.02 inches
    • Stroke: 5.31 inches
  • Operating Specifications
    • Operating Weight: 45,300 lbs
    • Fuel Capacity: 104 gallons
    • Cooling System Fluid Capacity: 11 gallons
    • Hydraulic System Fluid Capacity: 38 gallons
    • Engine Oil Capacity: 5.28 gallons
    • Transmission Oil Capacity: 12 gallons
    • Front Axle Oil Capacity: 7 gallons
    • Rear Axle Oil Capacity: 17 gallons
  • Transmission
    • Transmission Type: Power Shift
    • Number of Forward Gears: 8
    • Number of Reverse Gears: 6
    • Top Forward Speed: 28 mph
    • Top Reverse Speed: 22 mph
  • Blade Dimensions
    • Blade Width: 12 feet
    • Blade Height: 24 inches
    • Blade Cutting Edge Angle: 42 degrees
    • Blade Tilt Angle: 25 degrees
    • Blade Arc Radius: 16 inches
  • Performance
    • Turning Radius: 23 feet (outside front tires)
    • Max Travel Speed: 28 mph
    • Max Ripper Penetration Depth: 16 inches
    • Ripper Shank Hold Spacing: 19 inches
  • Dimensions
    • Overall Length (without attachments): 33 feet
    • Overall Width: 8 feet
    • Overall Height: 10 feet
    • Ground Clearance: 14 inches
    • Wheelbase: 20 feet

1996 Cat 140H

earth moving and construction

$87,500 USD
 
Instant Quote Eligible Listing - CLICK HERE!
CONTACT INFO
Name:
Jim Gagliardi
Phone:

ADDRESS
National Equipment, LLC
12201 Hwy 99 (at Ave 12)
MaderaCalifornia 93638
ATTRIBUTES
STOCK #:
0501
YEAR:
1996
Manufacturer:
MODEL #:
SERIAL #:
2ZK00806
CONDITION:
Used
HOUR METER:
14372
UNIT LOCATION:
California [93638]
POST DATE:
2/18/2026
  • Engine Specifications
    • Engine Model: Cat C7.1
    • Net Power: 165 HP
    • Displacement: 433 cubic inches
    • Bore: 4.02 inches
    • Stroke: 5.31 inches
  • Operating Specifications
    • Operating Weight: 45,300 lbs
    • Fuel Capacity: 104 gallons
    • Cooling System Fluid Capacity: 11 gallons
    • Hydraulic System Fluid Capacity: 38 gallons
    • Engine Oil Capacity: 5.28 gallons
    • Transmission Oil Capacity: 12 gallons
    • Front Axle Oil Capacity: 7 gallons
    • Rear Axle Oil Capacity: 17 gallons
  • Transmission
    • Transmission Type: Power Shift
    • Number of Forward Gears: 8
    • Number of Reverse Gears: 6
    • Top Forward Speed: 28 mph
    • Top Reverse Speed: 22 mph
  • Blade Dimensions
    • Blade Width: 12 feet
    • Blade Height: 24 inches
    • Blade Cutting Edge Angle: 42 degrees
    • Blade Tilt Angle: 25 degrees
    • Blade Arc Radius: 16 inches
  • Performance
    • Turning Radius: 23 feet (outside front tires)
    • Max Travel Speed: 28 mph
    • Max Ripper Penetration Depth: 16 inches
    • Ripper Shank Hold Spacing: 19 inches
  • Dimensions
    • Overall Length (without attachments): 33 feet
    • Overall Width: 8 feet
    • Overall Height: 10 feet
    • Ground Clearance: 14 inches
    • Wheelbase: 20 feet
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.


Call
Get Quote
Equipment Finder Equipment
finder
*All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Please correct the following