Eliftruck
BUY A FORKLIFT SELL A FORKLIFT RENT A FORKLIFT
Overview
Spec Sheet
Shipping/Freight
Spec Sheet
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.

  • Model Number: HT32CT
  • Manufacturer: Linde
  • Type: Forklift
  • Subtype: Cushion Tire 4 Wheel Sit Down (Indoor Warehouse)
  • Fuel Type Used: LP Gas
  • Dimensions
    • Overall Length: About 115 inches
    • Overall Width: Approximately 48 inches
    • Overall Height: Approximately 85 inches
    • Wheelbase: Approximately 73 inches
    • Ground Clearance: Roughly 4 inches
    • Fork Length: Varies
  • Weight
    • Operating Weight: Approximately 10,000 pounds
  • Performance
    • Load Capacity: 6,500 pounds
    • Travel Speed: Up to 11 mph
    • Turning Radius: About 80 inches
  • Powertrain
    • Engine Type: Internal Combustion Engine
    • Horsepower: Approximately 60 HP
    • Transmission: Hydrostatic
  • Tires
    • Type: Cushion Tires
    • Front Tire Size: 18 x 7-8 inches
    • Rear Tire Size: 16 x 5-10.5 inches
  • Hydraulics
    • Hydraulic System Pressure: 2,000 psi
  • Operator Environment
    • Seating: Sit Down
    • Cab: Open Seat
    • Steering: Power Steering
    • Controls: Fingertip

2023 Linde HT32CT

New

cushion tire 4 wheel sit down (indoor warehouse) lp gas

$34,900 USD
 
Instant Quote Eligible Listing - CLICK HERE!
CONTACT INFO
Name:
Sales Dept.

ADDRESS
Burwell Material Handling
3218 Salem Turnpike NW
RoanokeVirginia 24017
ATTRIBUTES
STOCK #:
EQ0100414
YEAR:
2023
Manufacturer:
MODEL #:
CAPACITY:
6400
FUEL:
MAST TYPE:
MAST HEIGHT:
185 in
SERIAL #:
A11319M00491
SIDE SHIFTER:
Yes
CONDITION:
New
UNIT LOCATION:
Virginia [24017]
POST DATE:
2/9/2026
Reviews
Useful
Not

The Linde HT32CT has been a solid addition to our indoor warehouse operations. Having used various forklifts over the years, I found this model especially reliable when navigating tighter spaces. It's smooth on turns and feels sturdy, which really helps when stacking heavy pallets. Plus, the LP gas engine is surprisingly efficient, making those long shifts a bit more manageable without constant refueling breaks. I remember during a busy season, this forklift really stood out for its ability to handle peak loads without breaking a sweat. Overall, it's been a great workhorse for us.



Review by Jason Miller (1/5/2026)

  • Model Number: HT32CT
  • Manufacturer: Linde
  • Type: Forklift
  • Subtype: Cushion Tire 4 Wheel Sit Down (Indoor Warehouse)
  • Fuel Type Used: LP Gas
  • Dimensions
    • Overall Length: About 115 inches
    • Overall Width: Approximately 48 inches
    • Overall Height: Approximately 85 inches
    • Wheelbase: Approximately 73 inches
    • Ground Clearance: Roughly 4 inches
    • Fork Length: Varies
  • Weight
    • Operating Weight: Approximately 10,000 pounds
  • Performance
    • Load Capacity: 6,500 pounds
    • Travel Speed: Up to 11 mph
    • Turning Radius: About 80 inches
  • Powertrain
    • Engine Type: Internal Combustion Engine
    • Horsepower: Approximately 60 HP
    • Transmission: Hydrostatic
  • Tires
    • Type: Cushion Tires
    • Front Tire Size: 18 x 7-8 inches
    • Rear Tire Size: 16 x 5-10.5 inches
  • Hydraulics
    • Hydraulic System Pressure: 2,000 psi
  • Operator Environment
    • Seating: Sit Down
    • Cab: Open Seat
    • Steering: Power Steering
    • Controls: Fingertip
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.


Call
Get Quote
Equipment Finder Equipment
finder
*All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Please correct the following