Eliftruck
BUY A FORKLIFT SELL A FORKLIFT RENT A FORKLIFT
Overview
Spec Sheet
Shipping/Freight
Spec Sheet
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.

  • Manufacturer: Linde
  • Model Number: H80D - 900
  • Type: Forklift
  • Subtype: Pneumatic Tire 4 Wheel Sit Down
  • Fuel Type Used: Diesel
  • Capacity: 17,637 lbs
  • Drive: 4x2
  • Engine: Diesel Engine, likely recent generation
  • Wheelbase: Approximately 118 inches
  • Tires: Pneumatic tires
  • Steering: Standard Steering Configuration
  • Performance:
    • Top Speed: Approximately 12 mph
    • Load Center: 24 inches
    • Gradeability: 36% at loaded
  • Dimensions:
    • Overall Length: Approximately 180 inches (with forks)
    • Overall Width: Approximately 77 inches
    • Overall Height (with overhead guard): Approximately 115 inches
    • Turning Radius: Approximately 127 inches
  • Fork Details:
    • Length: Varies
    • Thickness: Approximately 2 inches
  • Weight:
    • Service Weight: Approximately 26,000 lbs

2017 Linde H80D900

pneumatic tire 4 wheel sit down diesel

$59,500 USD
 
Instant Quote Eligible Listing - CLICK HERE!
CONTACT INFO
Name:
Sales
Phone:

ADDRESS
Continental Lift Truck
16600 Johnson Memorial Dr
JordanMinnesota 55352
ATTRIBUTES
STOCK #:
30723
YEAR:
2017
Manufacturer:
MODEL #:
CAPACITY:
17500
FUEL:
MAST TYPE:
MAST HEIGHT:
119.5 / 132 in
SIDE SHIFTER:
Yes
CONDITION:
Used
HOUR METER:
5649
UNIT LOCATION:
Minnesota [55352]
DESCRIPTION:
DIESEL, HYDRO, S/S, F/P, CAB, 36”LC - 119.5/132" STD
POST DATE:
6/13/2026
Reviews
Useful
Not

The H80D from Linde has proven to be a solid workhorse on our job site. I remember the first time I hopped in one; it felt surprisingly comfortable for a full day of moving heavy loads around. The diesel engine has plenty of power, and it tackles steep ramps without breaking a sweat, which is a lifesaver when you're racing against the clock. Plus, the pneumatic tires make going over uneven surfaces a breeze, and they just grip the ground. It's a bit of a beast, but if you're looking for something tough and reliable, this forklift gets the job done. Overall, it's been a great addition to our fleet and has made our operations smoother.



Review by Jake Thompson (2/5/2026)

  • Manufacturer: Linde
  • Model Number: H80D - 900
  • Type: Forklift
  • Subtype: Pneumatic Tire 4 Wheel Sit Down
  • Fuel Type Used: Diesel
  • Capacity: 17,637 lbs
  • Drive: 4x2
  • Engine: Diesel Engine, likely recent generation
  • Wheelbase: Approximately 118 inches
  • Tires: Pneumatic tires
  • Steering: Standard Steering Configuration
  • Performance:
    • Top Speed: Approximately 12 mph
    • Load Center: 24 inches
    • Gradeability: 36% at loaded
  • Dimensions:
    • Overall Length: Approximately 180 inches (with forks)
    • Overall Width: Approximately 77 inches
    • Overall Height (with overhead guard): Approximately 115 inches
    • Turning Radius: Approximately 127 inches
  • Fork Details:
    • Length: Varies
    • Thickness: Approximately 2 inches
  • Weight:
    • Service Weight: Approximately 26,000 lbs
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.


Call
Get Quote
Equipment Finder Equipment
finder
*All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Please correct the following