Overview
Spec Sheet
Shipping/Freight

2014 Komatsu PC290 LC-10

earth moving and construction

Call for price
CONTACT INFO
Name:
Mike Finley
Phone:

ADDRESS
4M Iron
344 Winningham Road,
St. GeorgeSouth Carolina 29477
ATTRIBUTES
STOCK #:
16647
YEAR:
2014
Manufacturer:
MODEL #:
CONDITION:
Used
HOUR METER:
5951
LOCATION:
POST DATE:
2/25/2025
Equipment Description
CAB WITH AC, MANUAL THUMB WITH QUICK COUPLER AND BUCKET, UNDERCARRIAGE IS WEAK, RUNS GOOD
  • Engine
    • Model: Komatsu SAA6D107E-2
    • Type: Water-cooled, 4-cycle, 6-cylinder, Turbodiesel
    • Gross Horsepower: 196 HP
    • Net Horsepower: 190 HP
    • Displacement: 408 cu in
    • Bore x Stroke: 4.21 in x 4.55 in
    • Maximum Torque: 487 lb-ft @ 1500 RPM
  • Operational
    • Operating Weight: 65,271 lbs
    • Fuel Capacity: 81.9 gal
    • Hydraulic System Fluid Capacity: 29.7 gal
    • Engine Oil Capacity: 7.9 gal
    • Coolant Capacity: 7.7 gal
  • Performance
    • Travel Speed - High: 3.7 mph
    • Travel Speed - Low: 2.2 mph
    • Max Digging Depth: 22 ft 0 in
    • Max Dumping Height: 22 ft 9 in
    • Swing Speed: 11 RPM
    • Bucket Capacity: 0.76 - 2.19 cubic yards
  • Hydraulic System
    • Main Pumps: 2 Variable Displacement Piston Pumps
    • Pump Flow Capacity: 79.2 gal/min
    • Relief Valve Setting: 5,040 psi
  • Dimensions
    • Overall Length: 31 ft 11 in
    • Overall Width: 10 ft 5 in
    • Overall Height (to top of cab): 10 ft 0 in
    • Track Length: 14 ft 2 in
    • Ground Clearance: 1 ft 6 in
    • Tail Swing Radius: 10 ft 1 in
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.


Your location is Columbus, OH. Modify

Call
Get Quote
Equipment Finder Equipment
finder
*Payment stated above assumes a secured commercial loan transaction available to highly qualified applicants. Commercial financing provided or arranged by Strada Capital Corporation dba Mazo Capital Solutions pursuant to California Finance Lender License #603G255. Equal opportunity lender. Not all applicants will qualify. Applicant credit profile including FICO is used for credit review. Actual terms available may vary depending on applicant and/or guarantor credit profile(s), equipment type and additional approval conditions. Older assets or more may require increased finance charges. Financing approval will require pledge of collateral as security.
Please correct the following