Eliftruck
BUY A FORKLIFT SELL A FORKLIFT RENT A FORKLIFT
Overview
Spec Sheet
Shipping/Freight
Spec Sheet
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.

  • Manufacturer: Hyster
  • Model Number: N35ZR2
  • Type: Forklift
  • Subtype: Electric Narrow Aisle Single Reach
  • Fuel Type Used: Electric
  • Powertrain:
    • Power Source: Electric
    • Battery Voltage: 36V or 48V (varies based on configuration)
    • Drive Motor: AC Motor
    • Hydraulic Motor: AC Motor
  • Dimensions:
    • Wheelbase: 59 inches
    • Vehicle Length (without load): 87 inches
    • Overall Width: 42 inches
    • Outside Turning Radius: 63 inches
    • Ground Clearance: 2.5 inches
  • Load Handling:
    • Load Capacity: 3,500 lbs
    • Load Center: 24 inches
    • Fork Length: Varies
    • Fork Width: 4 inches
    • Fork Thickness: 1.5 inches
  • Performance:
    • Travel Speed (with load): 7 mph
    • Travel Speed (without load): 8 mph
    • Lift Speed (with load): 60 ft/min
    • Lift Speed (without load): 100 ft/min
    • Lowering Speed (with load): 90 ft/min
    • Lowering Speed (without load): 80 ft/min
  • Safety and Ergonomics:
    • Operator Compartment: Spacious with ergonomic seat design
    • Visibility: Enhanced mast design for improved forward and upward visibility
    • Controls: Fingertip control for all hydraulic functions
    • Braking System: Regenerative braking
  • Tires and Wheels:
    • Front Tire: Solid poly 10 inches diameter
    • Rear Tire: Solid poly 16 inches diameter
    • Number of Wheels: 3-wheeled configuration

2014 Hyster N35ZR2

electric narrow aisle single reach

Call for price
 
CONTACT INFO
Name:
Sales Dept.
Phone:

ADDRESS
Select Equipment Sales
6911 8th St
Buena ParkCalifornia 90620
ATTRIBUTES
STOCK #:
U210107
YEAR:
2014
Manufacturer:
MODEL #:
CAPACITY:
3500
FUEL:
MAST TYPE:
MAST HEIGHT:
91 / 203 in
SIDE SHIFTER:
Yes
CONDITION:
Used
HOUR METER:
6684
UNIT LOCATION:
California [90620]
DESCRIPTION:
91" Lowered, 36 Volt, Side-Shift, 6684 Hours
POST DATE:
5/27/2026
Reviews
Useful
Not

The Hyster N35ZR2 has really impressed me over the past few months at my warehouse job. Navigating through those tight aisles used to be a real hassle with clunky equipment, but this electric narrow aisle forklift makes everything feel so much smoother. It's quiet, and I appreciate not having to deal with fumes while I work. Not to mention, it helps that I can lift pallets a lot higher without worrying about tipping over. I remember the first time I used it; I was amazed at how effortless it felt to maneuver in spaces I thought would be impossible. Overall, it’s been a solid addition to our fleet.



Review by Mike Thompson (12/5/2025)

  • Manufacturer: Hyster
  • Model Number: N35ZR2
  • Type: Forklift
  • Subtype: Electric Narrow Aisle Single Reach
  • Fuel Type Used: Electric
  • Powertrain:
    • Power Source: Electric
    • Battery Voltage: 36V or 48V (varies based on configuration)
    • Drive Motor: AC Motor
    • Hydraulic Motor: AC Motor
  • Dimensions:
    • Wheelbase: 59 inches
    • Vehicle Length (without load): 87 inches
    • Overall Width: 42 inches
    • Outside Turning Radius: 63 inches
    • Ground Clearance: 2.5 inches
  • Load Handling:
    • Load Capacity: 3,500 lbs
    • Load Center: 24 inches
    • Fork Length: Varies
    • Fork Width: 4 inches
    • Fork Thickness: 1.5 inches
  • Performance:
    • Travel Speed (with load): 7 mph
    • Travel Speed (without load): 8 mph
    • Lift Speed (with load): 60 ft/min
    • Lift Speed (without load): 100 ft/min
    • Lowering Speed (with load): 90 ft/min
    • Lowering Speed (without load): 80 ft/min
  • Safety and Ergonomics:
    • Operator Compartment: Spacious with ergonomic seat design
    • Visibility: Enhanced mast design for improved forward and upward visibility
    • Controls: Fingertip control for all hydraulic functions
    • Braking System: Regenerative braking
  • Tires and Wheels:
    • Front Tire: Solid poly 10 inches diameter
    • Rear Tire: Solid poly 16 inches diameter
    • Number of Wheels: 3-wheeled configuration
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.


Call
Get Quote
Equipment Finder Equipment
finder
*All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Please correct the following