Eliftruck
BUY A FORKLIFT SELL A FORKLIFT RENT A FORKLIFT
Overview
Spec Sheet
Shipping/Freight
Spec Sheet
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.

  • Model Number: H25CT
  • Manufacturer: Linde
  • Type: Forklift
  • Engine Specifications:
    • Engine Type: Internal Combustion
    • Fuel Type: LPG (Liquefied Petroleum Gas)
    • Engine Power: Approximately 58 hp (horsepower)
  • Performance:
    • Load Capacity: 5,500 lbs
    • Travel Speed: Up to 12 mph (unloaded)
    • Lifting Speed: Approximately 80 feet/minute (unloaded)
  • Dimensions & Weights:
    • Length to Fork Face: Approximately 98 inches
    • Overall Width: About 47 inches
    • Height to Overhead Guard: Roughly 85 inches
    • Wheelbase: Approximately 63 inches
    • Operating Weight: Around 9,600 lbs
  • Chassis & Tires:
    • Tire Type: Pneumatic or solid
    • Front Tires: 2
    • Rear Tires: 2
  • Hydraulics:
    • Hydraulic System Pressure: Approximately 3,770 psi
  • Transmission:
    • Transmission Type: Hydrostatic
  • Forks:
    • Fork Length: Varies
    • Fork Width: Typically around 4 inches

2004 Linde H25CT

cushion tire 4 wheel sit down (indoor warehouse) lp gas

Call for price
 
CONTACT INFO
Name:
Sales Dept.
Phone:

ADDRESS
Select Equipment Sales
6911 8th St
Buena ParkCalifornia 90620
ATTRIBUTES
STOCK #:
U181200
YEAR:
2004
Manufacturer:
MODEL #:
CAPACITY:
5000
FUEL:
MAST TYPE:
MAST HEIGHT:
188 in
SIDE SHIFTER:
Yes
CONDITION:
Used
UNIT LOCATION:
California [93308]
POST DATE:
5/27/2026
Reviews
Useful
Not

The Linde H25CT forklift has really impressed me with its balance of power and ease of use. During a recent project at the warehouse, we had to move some heavy pallets, and this machine made it feel almost effortless. The controls are intuitive, which definitely helped when training some new staff on the spot. I remember when we were short-staffed, and I hopped on to help out—after just a few minutes, I felt comfortable handling it. Its maneuverability in tight spaces is a game-changer too; I didn't think we’d get as much done in those cramped aisles. Overall, it’s robust, reliable, and a solid choice for anyone in need of a dependable forklift.



Review by Jake Thompson (10/5/2025)

  • Model Number: H25CT
  • Manufacturer: Linde
  • Type: Forklift
  • Engine Specifications:
    • Engine Type: Internal Combustion
    • Fuel Type: LPG (Liquefied Petroleum Gas)
    • Engine Power: Approximately 58 hp (horsepower)
  • Performance:
    • Load Capacity: 5,500 lbs
    • Travel Speed: Up to 12 mph (unloaded)
    • Lifting Speed: Approximately 80 feet/minute (unloaded)
  • Dimensions & Weights:
    • Length to Fork Face: Approximately 98 inches
    • Overall Width: About 47 inches
    • Height to Overhead Guard: Roughly 85 inches
    • Wheelbase: Approximately 63 inches
    • Operating Weight: Around 9,600 lbs
  • Chassis & Tires:
    • Tire Type: Pneumatic or solid
    • Front Tires: 2
    • Rear Tires: 2
  • Hydraulics:
    • Hydraulic System Pressure: Approximately 3,770 psi
  • Transmission:
    • Transmission Type: Hydrostatic
  • Forks:
    • Fork Length: Varies
    • Fork Width: Typically around 4 inches
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.


Call
Get Quote
Equipment Finder Equipment
finder
*All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Please correct the following