Overview
Spec Sheet
Shipping/Freight
Spec Sheet
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.

  • General Information
    • Model: H250XL
    • Manufacturer: Hyster
    • Type: Forklift
    • Subtype: Pneumatic Tire 4 Wheel Sit Down
  • Dimensions
    • Overall Length: Varies
    • Overall Width: Approximately 7 feet
    • Height to Top of Overhead Guard: Approximately 9 feet
    • Wheelbase: Approximately 8 feet
  • Weight
    • Service Weight: Approximately 35,000 lbs
    • Axle Load, Loaded: Varies
    • Axle Load, Unloaded: Varies
  • Engine
    • Engine Type: Diesel
    • Manufacturer: Varies (Cummins or similar)
    • Power Output: Approximately 130 horsepower
  • Performance
    • Rated Load Capacity: 25,000 lbs
    • Load Center: 24 inches
    • Maximum Travel Speed: Approximately 18 mph (unloaded)
    • Lift Speed: Approximately 70 ft/min (loaded)
  • Tires
    • Tire Type: Pneumatic
    • Front Tires: 4
    • Rear Tires: 2
  • Steering and Brakes
    • Steering Type: Hydrostatic
    • Service Brake: Hydraulic
  • Capacities
    • Fuel Tank Capacity: Approximately 50 gallons
    • Hydraulic System Capacity: Approximately 55 gallons

1998 Hyster H250XL

pneumatic tire 4 wheel sit down diesel

$39,000 USD
 
Instant Quote Eligible Listing - CLICK HERE!
CONTACT INFO
Name:
Chris Carlson
Phone:

ADDRESS
Jade International
6803 SE Johnson Creek Blvd
PortlandOregon 97206
ATTRIBUTES
STOCK #:
51026
YEAR:
1998
Manufacturer:
MODEL #:
CAPACITY:
25000
FUEL:
MAST TYPE:
MAST HEIGHT:
183 in
SIDE SHIFTER:
Yes
CONDITION:
Used
HOUR METER:
4200
UNIT LOCATION:
Oregon [97206]
DESCRIPTION:
Full Cab, very clean inside, turbo diesel,
POST DATE:
5/1/2026
Reviews
Useful
Not

The H250XL forklift from Hyster has really impressed me with its smooth operation and power. I was working in a warehouse recently, and this beast handled everything we threw at it, even in tight spaces. The pneumatic tires make a huge difference, allowing for a comfortable ride on uneven surfaces, which is a lifesaver when you're on the job all day. It feels solid and sturdy, which gives you confidence when lifting heavy loads. Honestly, I went from a bit of skepticism to being a fan pretty quickly. It’s definitely lived up to my expectations as a reliable workhorse. Just don't expect it to fit in your average garage!


Review by Jake Thompson (9/15/2025)

  • General Information
    • Model: H250XL
    • Manufacturer: Hyster
    • Type: Forklift
    • Subtype: Pneumatic Tire 4 Wheel Sit Down
  • Dimensions
    • Overall Length: Varies
    • Overall Width: Approximately 7 feet
    • Height to Top of Overhead Guard: Approximately 9 feet
    • Wheelbase: Approximately 8 feet
  • Weight
    • Service Weight: Approximately 35,000 lbs
    • Axle Load, Loaded: Varies
    • Axle Load, Unloaded: Varies
  • Engine
    • Engine Type: Diesel
    • Manufacturer: Varies (Cummins or similar)
    • Power Output: Approximately 130 horsepower
  • Performance
    • Rated Load Capacity: 25,000 lbs
    • Load Center: 24 inches
    • Maximum Travel Speed: Approximately 18 mph (unloaded)
    • Lift Speed: Approximately 70 ft/min (loaded)
  • Tires
    • Tire Type: Pneumatic
    • Front Tires: 4
    • Rear Tires: 2
  • Steering and Brakes
    • Steering Type: Hydrostatic
    • Service Brake: Hydraulic
  • Capacities
    • Fuel Tank Capacity: Approximately 50 gallons
    • Hydraulic System Capacity: Approximately 55 gallons
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.


Call
Get Quote
Equipment Finder Equipment
finder
*All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Please correct the following