Eliftruck
BUY A FORKLIFT SELL A FORKLIFT RENT A FORKLIFT
Overview
Spec Sheet
Shipping/Freight
Equipment Description
2600 Hours 2012 used KALMAR DCE150-12 for sale. Global has over 2000 pieces of used equipment in stock. Inquire today about Stock #GU003971, Stock Number: GU003971, Make: KALMAR, Model: DCE150-12, Year: 2012, Auxilliary Hydralic Valves: 0, Capacity: 33000 Lbs, Carriage: SSFP, Carriage Width: 0.00", Fork Length: 96.00", Fork Taper: Pallet, Fork Thickness: 0.00", Full Free Height: 0.00", Load Center: 48", Mast: Duplex, Max Fork Height: 187.00", Overall Lowered Height: 160.00", Operator Protection: Enclosed Cab, Hours: 2600, Chassis: 2 Wheel Drive, Fuel: Diesel
Spec Sheet
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.

  • General Specs
    • Model Number: DCE150-12
    • Manufacturer: Kalmar
    • Type: Forklift
    • Subtype: Pneumatic Tire 4 Wheel Sit Down
  • Dimensions
    • Length to Fork Face: Approximately 16.4 ft
    • Width: Approximately 8.4 ft
    • Overall Height: Approximately 11.3 ft
    • Wheelbase: Approximately 10 ft
    • Ground Clearance: Approximately 12 in
  • Performance
    • Rated Load Capacity: 33,000 lbs
    • Travel Speed (loaded/unloaded): Approximately 15 mph
    • Lifting Speed (loaded/unloaded): Approximately 1.2 ft/s
    • Lowering Speed (loaded/unloaded): Approximately 1.2 ft/s
  • Engine
    • Type: Diesel
    • Model: Unspecific
    • Power Output: Approximately 175 hp
    • Number of Cylinders: 6
    • Fuel Capacity: Approximately 52 gallons
  • Tires
    • Tire Type: Pneumatic
    • Tire Size (Front): Approximately 12 x 20
    • Tire Size (Rear): Approximately 12 x 20
  • Hydraulic System
    • Operating Pressure: Approximately 3,625 psi
    • Hydraulic Tank Capacity: Approximately 35 gallons
  • Brakes
    • Service Brakes: Hydraulic
    • Parking Brakes: Manual
  • Cab Features
    • Seating: Adjustable, ergonomic seat
    • Controls: Joystick or multi-lever
    • Visibility: 360 degrees
    • Climate Control: Available

2012 Kalmar DCE150-12

pneumatic tire 4 wheel sit down diesel

$140,000 USD
 
Instant Quote Eligible Listing - CLICK HERE!
CONTACT INFO
Name:
Sales Rep

ADDRESS
Global Fleet Solutions
17300 W Valley Hwy
Seattle, Washington 98188
ATTRIBUTES
STOCK #:
GU003971
YEAR:
2012
Manufacturer:
MODEL #:
CAPACITY:
33000
FUEL:
MAST TYPE:
MAST HEIGHT:
187 in
SERIAL #:
F40200296
SIDE SHIFTER:
Yes
HOUR METER:
2600
UNIT LOCATION:
POST DATE:
10/3/2026
Reviews
Useful
Not

The Kalmar DCE150-12 is a solid piece of machinery that really stood out to me during my time at the shipping yard. It's got a great balance, making those heavy lifts feel surprisingly manageable. One time, I remember needing to stack some pretty hefty containers, and the way this forklift handled them was impressive. It felt like it was part of the crew, not just a tool. The pneumatic tires give it a nice grip, too, which came in handy when the ground was a bit uneven. Overall, it’s reliable, sturdy, and gets the job done without any fuss. I can definitely see it being a go-to for anyone who needs a dependable forklift for heavy-duty work.



Review by Jake Thompson (6/8/2025)

  • General Specs
    • Model Number: DCE150-12
    • Manufacturer: Kalmar
    • Type: Forklift
    • Subtype: Pneumatic Tire 4 Wheel Sit Down
  • Dimensions
    • Length to Fork Face: Approximately 16.4 ft
    • Width: Approximately 8.4 ft
    • Overall Height: Approximately 11.3 ft
    • Wheelbase: Approximately 10 ft
    • Ground Clearance: Approximately 12 in
  • Performance
    • Rated Load Capacity: 33,000 lbs
    • Travel Speed (loaded/unloaded): Approximately 15 mph
    • Lifting Speed (loaded/unloaded): Approximately 1.2 ft/s
    • Lowering Speed (loaded/unloaded): Approximately 1.2 ft/s
  • Engine
    • Type: Diesel
    • Model: Unspecific
    • Power Output: Approximately 175 hp
    • Number of Cylinders: 6
    • Fuel Capacity: Approximately 52 gallons
  • Tires
    • Tire Type: Pneumatic
    • Tire Size (Front): Approximately 12 x 20
    • Tire Size (Rear): Approximately 12 x 20
  • Hydraulic System
    • Operating Pressure: Approximately 3,625 psi
    • Hydraulic Tank Capacity: Approximately 35 gallons
  • Brakes
    • Service Brakes: Hydraulic
    • Parking Brakes: Manual
  • Cab Features
    • Seating: Adjustable, ergonomic seat
    • Controls: Joystick or multi-lever
    • Visibility: 360 degrees
    • Climate Control: Available
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.

Freight & Delivery Estimation

Ships from: Seattle, Washington

Need this equipment delivered to your facility or job site? Run our instant calculator to compare competitive carrier rates based on this unit's exact specs.

Calculate Rates Instant estimate • Free
Eliftruck Freight Transport Semi
Specs pre-loaded Flatbed & RGN options Door-to-door delivery
Call
Get Quote
Equipment Finder Equipment
finder
*All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Please correct the following