Eliftruck
BUY A FORKLIFT SELL A FORKLIFT RENT A FORKLIFT
Overview
Spec Sheet
Shipping/Freight
Equipment Description
2005 CAT 325CL Excavator with Auger Attachment. 5" Hex Drive, CAT 3126, Hour Meter Reads - 5494. 20' Boom,
Spec Sheet
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.

  • General Information
    • Model Number: 325CL
    • Manufacturer: Cat
    • Subtype: Earth Moving and Construction
  • Engine Specifications
    • Engine Model: Cat C7
    • Net Power: 204 hp
    • Gross Power: 213 hp
    • Displacement: 439 cubic inches
    • Number of Cylinders: 6
  • Operating Specifications
    • Operating Weight: 70,063 lbs
    • Fuel Capacity: 143.8 gallons
    • Hydraulic System Fluid Capacity: 45 gallons
  • Dimensions
    • Tail Swing Radius: 9.3 ft
    • Track Length: 14.2 ft
    • Overall Height: 9.9 ft
    • Overall Width: 10.5 ft
  • Performance
    • Maximum Travel Speed: 3.5 mph
    • Maximum Drawbar Pull: 60,200 lbs
    • Ground Pressure: 7.6 psi
  • Hydraulic System
    • Main System - Maximum Flow: 143 gallons per minute
    • Maximum Pressure - Equipment: 4,980 psi
    • Maximum Pressure - Travel: 4,980 psi
  • Additional Features
    • Automatic Engine Speed Control
    • Electronic Control System
    • Pilot Operated Hydraulic Controls
    • Boom and Stick Regeneration Circuits

2005 Cat 325CL

earth moving and construction

Call for price
 
CONTACT INFO
Name:
Jim Gagliardi
Phone:

ADDRESS
National Equipment, LLC
12201 Hwy 99 (at Ave 12)
MaderaCalifornia 93638
ATTRIBUTES
STOCK #:
150121972982
YEAR:
2005
Manufacturer:
MODEL #:
CONDITION:
Used
UNIT LOCATION:
California [93638]
POST DATE:
8/27/2026
  • General Information
    • Model Number: 325CL
    • Manufacturer: Cat
    • Subtype: Earth Moving and Construction
  • Engine Specifications
    • Engine Model: Cat C7
    • Net Power: 204 hp
    • Gross Power: 213 hp
    • Displacement: 439 cubic inches
    • Number of Cylinders: 6
  • Operating Specifications
    • Operating Weight: 70,063 lbs
    • Fuel Capacity: 143.8 gallons
    • Hydraulic System Fluid Capacity: 45 gallons
  • Dimensions
    • Tail Swing Radius: 9.3 ft
    • Track Length: 14.2 ft
    • Overall Height: 9.9 ft
    • Overall Width: 10.5 ft
  • Performance
    • Maximum Travel Speed: 3.5 mph
    • Maximum Drawbar Pull: 60,200 lbs
    • Ground Pressure: 7.6 psi
  • Hydraulic System
    • Main System - Maximum Flow: 143 gallons per minute
    • Maximum Pressure - Equipment: 4,980 psi
    • Maximum Pressure - Travel: 4,980 psi
  • Additional Features
    • Automatic Engine Speed Control
    • Electronic Control System
    • Pilot Operated Hydraulic Controls
    • Boom and Stick Regeneration Circuits
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.


Call
Get Quote
Equipment Finder Equipment
finder
*All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Please correct the following