Eliftruck
BUY A FORKLIFT SELL A FORKLIFT RENT A FORKLIFT
Overview
Spec Sheet
Shipping/Freight
Equipment Description
2017 used LINDE H50T for sale. Global has over 2000 pieces of used equipment in stock. Inquire today about Stock #HANC-EQ0005900, Stock Number: HANC-EQ0005900, Make: LINDE, Model: H50T, Year: 2017, Auxilliary Hydralic Valves: 5, Capacity: 10000 Lbs, Carriage: Rotator, Carriage Width: 54.00", Fork Length: 48.00", Fork Taper: Pallet, Fork Thickness: 2.50", Fork Width: 6.00", Full Free Height: 1.00", Load Center: 24", Mast: Duplex, Max Fork Height: 146.00", Overall Lowered Height: 110.00", Operator Protection: Enclosed Cab, Rear Tires: Solid Pneumatic, Hours: 7823, Chassis: 2 Wheel Drive, Fuel: LP
Spec Sheet
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.

  • General Specifications
    • Manufacturer: Linde
    • Model Number: H50T
    • Type: Forklift
  • Dimensions
    • Overall Length: Approximately 149 inches (without forks)
    • Overall Width: Approximately 55 inches
    • Height to Top of Overhead Guard: Approximately 98 inches
    • Ground Clearance: Approximately 6 inches
  • Weight and Capacity
    • Operating Weight: Approximately 15,432 pounds
    • Load Capacity: 11,000 pounds
  • Engine
    • Engine Type: LP Gas Engine
    • Displacement: 4.32 Liters (approximately 264 cubic inches)
    • Rated Power: Approximately 84 horsepower
  • Performance
    • Travel Speed, Laden: Approximately 14 mph
    • Lift Speed, Laden: Approximately 1.4 feet/second
    • Lowering Speed, Laden: Approximately 2.1 feet/second
  • Wheels and Tires
    • Drive Tires: Superelastic 8.25-15
    • Steer Tires: Superelastic 8.25-15
  • Brakes
    • Service Brake: Hydraulic
    • Parking Brake: Mechanical
  • Operator Environment
    • Steering: Hydrostatic Power Steering
    • Seat: Adjustable Suspension Seat

2017 Linde H50T

pneumatic tire 4 wheel sit down lp gas

Call for price
 
CONTACT INFO
Name:
Sales Rep

ADDRESS
Global Fleet Solutions
17300 W Valley Hwy
SeattleWashington 98188
ATTRIBUTES
STOCK #:
HANC-EQ0005900
YEAR:
2017
Manufacturer:
MODEL #:
CAPACITY:
10000
FUEL:
MAST TYPE:
MAST HEIGHT:
146 in
SERIAL #:
H2X394H02195
UNIT LOCATION:
DESCRIPTION:
7823 Hours
POST DATE:
8/12/2026
Reviews
Useful
Not

The Linde H50T forklift is quite a workhorse. During my last job at the warehouse, I had the chance to use this model and it really made handling heavy loads feel like less of a chore. I remember the first time I navigated it through the aisles—it was surprisingly smooth. The turning radius is pretty tight, which came in handy when maneuvering around those cramped corners. Plus, I appreciated how easy it was to control, especially during those marathon shifts when fatigue sets in. Overall, it’s reliable and gets the job done without too much fuss. If you're looking for a forklift that won’t let you down, I’d say this one’s a solid choice.



Review by Jake Thompson (4/12/2025)

  • General Specifications
    • Manufacturer: Linde
    • Model Number: H50T
    • Type: Forklift
  • Dimensions
    • Overall Length: Approximately 149 inches (without forks)
    • Overall Width: Approximately 55 inches
    • Height to Top of Overhead Guard: Approximately 98 inches
    • Ground Clearance: Approximately 6 inches
  • Weight and Capacity
    • Operating Weight: Approximately 15,432 pounds
    • Load Capacity: 11,000 pounds
  • Engine
    • Engine Type: LP Gas Engine
    • Displacement: 4.32 Liters (approximately 264 cubic inches)
    • Rated Power: Approximately 84 horsepower
  • Performance
    • Travel Speed, Laden: Approximately 14 mph
    • Lift Speed, Laden: Approximately 1.4 feet/second
    • Lowering Speed, Laden: Approximately 2.1 feet/second
  • Wheels and Tires
    • Drive Tires: Superelastic 8.25-15
    • Steer Tires: Superelastic 8.25-15
  • Brakes
    • Service Brake: Hydraulic
    • Parking Brake: Mechanical
  • Operator Environment
    • Steering: Hydrostatic Power Steering
    • Seat: Adjustable Suspension Seat
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.


Call
Get Quote
Equipment Finder Equipment
finder
*All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Please correct the following