Overview
Spec Sheet
Shipping/Freight
Equipment Description
Ex Government, Cab, Heat, Direct Drive Transmission 5F + 4R, 14' Balderson U Dozer w/ Hyd Tilt, MS Ripper, 36" Track Pads,
Spec Sheet
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.

  • Engine
    • Manufacturer: Caterpillar
    • Model: Cat C9.3B
    • Type: Inline 6-cylinder, 4-stroke, water-cooled, diesel
    • Displacement: 568 cubic inches
    • Net Power: 215 hp
    • Rated Speed: 2,200 rpm
  • Weights
    • Operating Weight: 45,644 lbs
    • Shipping Weight: 39,973 lbs
  • Dimensions
    • Overall Length: 18.6 ft
    • Width over Tracks: 12.2 ft
    • Height: 12.1 ft
    • Track Length on Ground: 10.5 ft
  • Capacity
    • Fuel Tank: 131 gallons
    • Cooling System: 11.9 gallons
    • Engine Oil: 7.4 gallons
    • Final Drives: 2 x 4.5 gallons
    • Transmission: 14 gallons
  • Undercarriage
    • Shoe Width: 36 inches
    • Ground Pressure: 6.9 psi
    • Track Gauge: 8.2 ft
    • Number of Track Rollers per Side: 8
  • Hydraulic System
    • Main Relief Valve Pressure: 3,982 psi
    • Pump Output: 58 gallons per minute
  • Performance
    • Travel Speed - Forward: 6.8 mph
    • Travel Speed - Reverse: 6.8 mph
    • Drawbar Pull: 89,136 lbs

1980 Cat D6D LGP

earth moving and construction

$35,000 USD
 
Instant Quote Eligible Listing - CLICK HERE!
CONTACT INFO
Name:
Jim Gagliardi
Phone:

ADDRESS
National Equipment, LLC
12201 Hwy 99 (at Ave 12)
MaderaCalifornia 93638
ATTRIBUTES
STOCK #:
0870
YEAR:
1980
Manufacturer:
MODEL #:
CONDITION:
Used
UNIT LOCATION:
California [93638]
POST DATE:
6/25/2026
  • Engine
    • Manufacturer: Caterpillar
    • Model: Cat C9.3B
    • Type: Inline 6-cylinder, 4-stroke, water-cooled, diesel
    • Displacement: 568 cubic inches
    • Net Power: 215 hp
    • Rated Speed: 2,200 rpm
  • Weights
    • Operating Weight: 45,644 lbs
    • Shipping Weight: 39,973 lbs
  • Dimensions
    • Overall Length: 18.6 ft
    • Width over Tracks: 12.2 ft
    • Height: 12.1 ft
    • Track Length on Ground: 10.5 ft
  • Capacity
    • Fuel Tank: 131 gallons
    • Cooling System: 11.9 gallons
    • Engine Oil: 7.4 gallons
    • Final Drives: 2 x 4.5 gallons
    • Transmission: 14 gallons
  • Undercarriage
    • Shoe Width: 36 inches
    • Ground Pressure: 6.9 psi
    • Track Gauge: 8.2 ft
    • Number of Track Rollers per Side: 8
  • Hydraulic System
    • Main Relief Valve Pressure: 3,982 psi
    • Pump Output: 58 gallons per minute
  • Performance
    • Travel Speed - Forward: 6.8 mph
    • Travel Speed - Reverse: 6.8 mph
    • Drawbar Pull: 89,136 lbs
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.


Call
Get Quote
Equipment Finder Equipment
finder
*All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Please correct the following