Overview
Spec Sheet
Shipping/Freight
Equipment Description
2010 Hyundai LP gas forklift. 6000 capacity with pneumatic tires. Model# 30L-7.
Spec Sheet
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.

  • General Information
    • Model Number: 30L-7
    • Manufacturer: Hyundai
    • Type: Forklift
    • Subtype: Pneumatic Tire 4 Wheel Sit Down
  • Engine Specifications
    • Engine Type: Diesel
    • Manufacturer: Hyundai
    • Power Output: Approximately 65 HP
    • Displacement: 202 cubic inches
  • Dimensions
    • Overall Length (without forks): Approximately 107 inches
    • Overall Width: Approximately 49 inches
    • Overall Height (overhead guard): Approximately 85 inches
    • Wheelbase: Approximately 69 inches
    • Ground Clearance: Approximately 5.5 inches
  • Weight
    • Service Weight: Approximately 9,920 lbs
  • Performance
    • Load Capacity: 6,000 lbs
    • Travel Speed (laden/unladen): Approximately 12.4 mph
    • Lifting Speed (laden/unladen): Approximately 59/63 ft/min
  • Turning Radius
    • Minimum Outside Turning Radius: Approximately 93 inches
  • Tires
    • Type: Pneumatic
    • Front Tire Size: 7.00-12
    • Rear Tire Size: 6.00-9
  • Fuel Tank
    • Capacity: Approximately 14 gallons
  • Transmission
    • Type: Automatic
    • Number of Speeds: 2 Forward / 2 Reverse
  • Hydraulic System
    • Pump Type: Gear
    • System Pressure: Approximately 2,755 psi

2010 Hyundai 30L-7

cushion tire 4 wheel sit down (indoor warehouse) lp gas

Call for price
 
CONTACT INFO
Name:
Sales Dept.
Phone:

ADDRESS
Motor Service, Inc.
130 Byassee Dr
HazelwoodMissouri 63042
ATTRIBUTES
STOCK #:
M-404
YEAR:
2010
Manufacturer:
MODEL #:
CAPACITY:
6000
FUEL:
MAST TYPE:
MAST HEIGHT:
86 / 185 in
SERIAL #:
HH1HHF09KA0000020K
SIDE SHIFTER:
Yes
CONDITION:
Used
HOUR METER:
5000
UNIT LOCATION:
Missouri [63042]
DESCRIPTION:
Call for sale price or rental rates! 314-731-4111
POST DATE:
6/15/2026
Reviews
Useful
Not

The Hyundai 30L-7 forklift has been a solid addition to our operations. I've spent quite a bit of time zipping around the warehouse with it, and it's surprisingly nimble for its size. One day, we had to move a rather heavy load on a rainy afternoon, and it handled the slick conditions like a champ. The pneumatic tires really make a difference on uneven surfaces, and I appreciate how it feels stable even when cornering. There’s a certain comfort in knowing you’ve got a reliable machine under you, especially when you're rushing to meet a tight deadline. All in all, it’s got a practical design and straightforward controls that just make the job a bit easier.



Review by Mike Henderson (1/15/2025)

  • General Information
    • Model Number: 30L-7
    • Manufacturer: Hyundai
    • Type: Forklift
    • Subtype: Pneumatic Tire 4 Wheel Sit Down
  • Engine Specifications
    • Engine Type: Diesel
    • Manufacturer: Hyundai
    • Power Output: Approximately 65 HP
    • Displacement: 202 cubic inches
  • Dimensions
    • Overall Length (without forks): Approximately 107 inches
    • Overall Width: Approximately 49 inches
    • Overall Height (overhead guard): Approximately 85 inches
    • Wheelbase: Approximately 69 inches
    • Ground Clearance: Approximately 5.5 inches
  • Weight
    • Service Weight: Approximately 9,920 lbs
  • Performance
    • Load Capacity: 6,000 lbs
    • Travel Speed (laden/unladen): Approximately 12.4 mph
    • Lifting Speed (laden/unladen): Approximately 59/63 ft/min
  • Turning Radius
    • Minimum Outside Turning Radius: Approximately 93 inches
  • Tires
    • Type: Pneumatic
    • Front Tire Size: 7.00-12
    • Rear Tire Size: 6.00-9
  • Fuel Tank
    • Capacity: Approximately 14 gallons
  • Transmission
    • Type: Automatic
    • Number of Speeds: 2 Forward / 2 Reverse
  • Hydraulic System
    • Pump Type: Gear
    • System Pressure: Approximately 2,755 psi
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.


Call
Get Quote
Equipment Finder Equipment
finder
*All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Please correct the following