Overview
Spec Sheet
Shipping/Freight
Equipment Description
Rockland Log Clamp 13,078 Hours 4 Speed Ride Control Locking Differential Backup Camera Lever Control 3 Function Good Rubber
Spec Sheet
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.

  • Engine
    • Manufacturer: Case
    • Model: 1021F
    • Gross Power: 320 hp
    • Displacement: 8.7 liters (531.5 cubic inches)
    • Engine Type: Diesel
  • Dimensions
    • Operating Weight: 52,000 lbs
    • Overall Length: 30 ft
    • Overall Width: 10 ft
    • Height to Top of Cab: 11 ft
    • Wheelbase: 11.8 ft
    • Ground Clearance: 1.5 ft
  • Performance
    • Breakout Force: 47,000 lbs
    • Bucket Capacity: 5.5 cubic yards
    • Dump Clearance at Full Height: 10 ft
    • Travel Speed - Forward: 25 mph
    • Turning Radius: 21 ft
  • Hydraulic System
    • Pump Flow Capacity: 55 gallons per minute
    • Relief Valve Setting: 3,800 psi
  • Transmission
    • Type: Powershift
    • Forward Gears: 4
    • Reverse Gears: 3
  • Tires
    • Tire Size: 29.5 R25

2016 Case 1021F

Buy or Rent

earth moving and construction

$55,000 USD
 
Instant Quote Eligible Listing - CLICK HERE!
CONTACT INFO
Name:
James McCallum
Phone:

ADDRESS
Concord Equipment
4890 E Nevada Ave
DetroitMichigan 48234
ATTRIBUTES
STOCK #:
150119748107
YEAR:
2016
Manufacturer:
MODEL #:
SERIAL #:
NGF224663
CONDITION:
Used/Rental
HOUR METER:
13078
UNIT LOCATION:
Michigan [48234]
POST DATE:
4/11/2026
  • Engine
    • Manufacturer: Case
    • Model: 1021F
    • Gross Power: 320 hp
    • Displacement: 8.7 liters (531.5 cubic inches)
    • Engine Type: Diesel
  • Dimensions
    • Operating Weight: 52,000 lbs
    • Overall Length: 30 ft
    • Overall Width: 10 ft
    • Height to Top of Cab: 11 ft
    • Wheelbase: 11.8 ft
    • Ground Clearance: 1.5 ft
  • Performance
    • Breakout Force: 47,000 lbs
    • Bucket Capacity: 5.5 cubic yards
    • Dump Clearance at Full Height: 10 ft
    • Travel Speed - Forward: 25 mph
    • Turning Radius: 21 ft
  • Hydraulic System
    • Pump Flow Capacity: 55 gallons per minute
    • Relief Valve Setting: 3,800 psi
  • Transmission
    • Type: Powershift
    • Forward Gears: 4
    • Reverse Gears: 3
  • Tires
    • Tire Size: 29.5 R25
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.


Call
Get Quote
Equipment Finder Equipment
finder
Please correct the following