Eliftruck
BUY A FORKLIFT SELL A FORKLIFT RENT A FORKLIFT
Overview
Spec Sheet
Shipping/Freight
Equipment Description
NEW HANGCHA FP25 XF2 5K FORKLIFT. EQUIPPED WITH 85/185 3-STAGE MAST, SIDESHIFT, LPG FUEL, SOLID PNEUMATIC TIRES, SAFETY EQUIPMENT, RAIN GUARD ROOF, 48" FORKS.
Spec Sheet
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.

  • Model Number: CPYD25-X2H31B1
  • Manufacturer: Hangcha
  • Type: Forklift
  • Subtype: Pneumatic Tire 4 Wheel Sit Down
  • Fuel Type Used: LP Gas
  • Load Capacity: 5,500 lbs
  • Weight: Approximately 8,000 lbs
  • Power Source: Spark Ignition Engine
  • Engine Type: 4-Stroke LPG Engine
  • Engine Model: Nissan K21
  • Engine Power: 43 HP (32 kW)
  • Transmission: Powershift Transmission
  • Drive System: Rear Wheel Drive
  • Tires: Pneumatic (front/rear)
  • Turning Radius: Approximately 88 inches
  • Overall Length: Approximately 96 inches
  • Overall Width: Approximately 45 inches
  • Overall Height: Approximately 80 inches
  • Seat Type: Full Suspension Seat
  • Brakes: Hydraulic Disc Brakes
  • Steering Type: Power Steering
  • Lift Control: Dual-Finger Control Handle
  • Hydraulic System: Open Center Hydraulic System
  • Fork Length: Varies
  • Load Center: 24 inches

2026 Hangcha CPYD25-X2H31B1

New

pneumatic tire 4 wheel sit down lp gas

$22,985 USD
 
Instant Quote Eligible Listing - CLICK HERE!
CONTACT INFO
Name:
Michael Williams
Phone:

ADDRESS
Power Products Inc
3225 Greenup Avenue
AshlandKentucky 41101
ATTRIBUTES
STOCK #:
PPI27
YEAR:
2026
Manufacturer:
MODEL #:
CAPACITY:
5000
FUEL:
MAST TYPE:
MAST HEIGHT:
86 / 185 in
SERIAL #:
13BE00842
SIDE SHIFTER:
Yes
CONDITION:
New
HOUR METER:
1
UNIT LOCATION:
Kentucky [41101]
DESCRIPTION:
NEW HANGCHA FP25 XF2
POST DATE:
4/1/2026
  • Model Number: CPYD25-X2H31B1
  • Manufacturer: Hangcha
  • Type: Forklift
  • Subtype: Pneumatic Tire 4 Wheel Sit Down
  • Fuel Type Used: LP Gas
  • Load Capacity: 5,500 lbs
  • Weight: Approximately 8,000 lbs
  • Power Source: Spark Ignition Engine
  • Engine Type: 4-Stroke LPG Engine
  • Engine Model: Nissan K21
  • Engine Power: 43 HP (32 kW)
  • Transmission: Powershift Transmission
  • Drive System: Rear Wheel Drive
  • Tires: Pneumatic (front/rear)
  • Turning Radius: Approximately 88 inches
  • Overall Length: Approximately 96 inches
  • Overall Width: Approximately 45 inches
  • Overall Height: Approximately 80 inches
  • Seat Type: Full Suspension Seat
  • Brakes: Hydraulic Disc Brakes
  • Steering Type: Power Steering
  • Lift Control: Dual-Finger Control Handle
  • Hydraulic System: Open Center Hydraulic System
  • Fork Length: Varies
  • Load Center: 24 inches
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.


Call
Get Quote
Equipment Finder Equipment
finder
*All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Please correct the following