Eliftruck
BUY A FORKLIFT SELL A FORKLIFT RENT A FORKLIFT
Overview
Spec Sheet
Shipping/Freight
Equipment Description
?? For Sale – 2019 Linde H80 (17,500 lb Capacity) ?? Diesel Powered Triple Mast – 203” Lift Height Integral Side Shift + Fork Positioner (SSFP) Factory Enclosed Cab Premium heavy-capacity Linde with low hours and full operator comfort — smooth, powerful, and built for high-demand applications. ?? Call today to secure this unit before it’s gone!
Spec Sheet
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.

  • Manufacturer: Linde
  • Model Number: H80D
  • Type: Forklift
  • General Specifications
    • Engine Type: Diesel
    • Transmission: Hydrostatic
    • Number of Wheels: 4
  • Engine Specifications
    • Engine Power: Approximately 122 HP
    • Number of Cylinders: 6
    • Fuel Tank Capacity: Approximately 31.7 gallons
  • Dimensions
    • Overall Length: Approximately 14.6 feet
    • Overall Width: Approximately 6.9 feet
    • Overall Height: Approximately 9.3 feet
    • Wheelbase: Approximately 8 feet
    • Ground Clearance: Approximately 1 foot
  • Performance
    • Load Capacity: 17,637 lbs
    • Travel Speed: Approximately 15.5 mph
    • Turning Radius: Approximately 12.8 feet
    • Climb Gradient: Varies
  • Forks
    • Fork Length: Varies
    • Fork Width: Approximately 8 inches
    • Fork Thickness: Approximately 3 inches
  • Safety and Comfort
    • Operator's Cabin: Enclosed or Open
    • Reverse Warning: Yes
    • Load Sensing System: Yes

2019 Linde H80D

Buy or Rent

pneumatic tire 4 wheel sit down diesel

Call for price
 
CONTACT INFO
Name:
Sales Dept.
Phone:

ADDRESS
Supreme Forklift & Equipment
25250 S Power Rd
Queen CreekArizona 85142
ATTRIBUTES
YEAR:
2019
Manufacturer:
MODEL #:
CAPACITY:
17500
FUEL:
MAST TYPE:
MAST HEIGHT:
112 / 203 in
SIDE SHIFTER:
Yes
CONDITION:
Used/Rental
UNIT LOCATION:
Arizona [85142]
DESCRIPTION:
FINANCING AVAILABLE
POST DATE:
3/23/2026
Reviews
Useful
Not

The Linde H80D forklift has become quite the reliable companion in our warehouse operations. During a recent busy season, this machine proved its worth—whether it was lifting heavy pallets or maneuvering in tight spaces, it handled every task with ease. I remember the first time I operated it; I was surprised by how intuitive everything felt. The controls were straightforward enough that I could focus on my surroundings rather than fumbling with buttons. It’s not just about strength; it also has a smooth ride that made longer shifts much less grueling. If you're looking for a forklift that balances power and comfort, this model should definitely be on your radar.



Review by Mike Thompson (9/4/2025)

  • Manufacturer: Linde
  • Model Number: H80D
  • Type: Forklift
  • General Specifications
    • Engine Type: Diesel
    • Transmission: Hydrostatic
    • Number of Wheels: 4
  • Engine Specifications
    • Engine Power: Approximately 122 HP
    • Number of Cylinders: 6
    • Fuel Tank Capacity: Approximately 31.7 gallons
  • Dimensions
    • Overall Length: Approximately 14.6 feet
    • Overall Width: Approximately 6.9 feet
    • Overall Height: Approximately 9.3 feet
    • Wheelbase: Approximately 8 feet
    • Ground Clearance: Approximately 1 foot
  • Performance
    • Load Capacity: 17,637 lbs
    • Travel Speed: Approximately 15.5 mph
    • Turning Radius: Approximately 12.8 feet
    • Climb Gradient: Varies
  • Forks
    • Fork Length: Varies
    • Fork Width: Approximately 8 inches
    • Fork Thickness: Approximately 3 inches
  • Safety and Comfort
    • Operator's Cabin: Enclosed or Open
    • Reverse Warning: Yes
    • Load Sensing System: Yes
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.


Freight & Delivery Estimation

Need this equipment delivered to your job site or facility? Run our free freight calculator to compare carrier transit times and estimated rates tailored to this unit's exact weight and dimensions.

Calculate Rates
Preloads equipment specs & location automatically | Instant estimate • No registration required
Call
Get Quote
Equipment Finder Equipment
finder
*All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Please correct the following