Eliftruck
BUY A FORKLIFT SELL A FORKLIFT RENT A FORKLIFT
Overview
Spec Sheet
Shipping/Freight
Equipment Description
3245 Hours 2017 used MITSUBISHI FD30N for sale. Global has over 2000 pieces of used equipment in stock. Inquire today about Stock #EQU038046, Stock Number: EQU038046, Make: MITSUBISHI, Model: FD30N, Year: 2017, Auxilliary Hydralic Valves: 4, Capacity: 6000 Lbs, Carriage: S/S, Carriage Width: 40.00", Fork Length: 48.00", Fork Taper: Pallet, Fork Thickness: 2.00", Fork Width: 4.75", Full Free Height: 0.00", Load Center: 24", Mast: Triplex, Max Fork Height: 188.00", Overall Lowered Height: 86.00", Operator Protection: Open Overhead Guard, Rear Tires: Non Marking, Hours: 3245, Chassis: 2 Wheel Drive, Fuel: Diesel
Spec Sheet
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.

  • General Specifications
    • Manufacturer: Mitsubishi
    • Model Number: FD30N
    • Type: Forklift
    • Subtype: Pneumatic Tire 4 Wheel Sit Down
  • Engine Specifications
    • Engine Manufacturer: Mitsubishi
    • Engine Type: Diesel
    • Engine Model: S4S
    • Number of Cylinders: 4
    • Displacement: 203 cubic inches
    • Power: Approximately 59 HP
  • Dimensions
    • Overall Length: Approximately 139 inches
    • Overall Width: Approximately 50 inches
    • Overall Height (Overhead Guard): Approximately 86 inches
    • Wheelbase: Approximately 70 inches
  • Performance
    • Load Capacity: 6,000 lbs
    • Tilt Angle Forward/Backward: 6/12 degrees
    • Travel Speed (Unloaded): Approximately 12.4 mph
    • Turning Radius: Approximately 95 inches
  • Tires
    • Type: Pneumatic
    • Front Tire Size: 7.00-12
    • Rear Tire Size: 6.00-9
  • Weights
    • Service Weight: Approximately 9,840 lbs
  • Hydraulic System
    • Hydraulic Tank Capacity: Approximately 11 gallons
  • Other Features
    • Steering: Hydrostatic power steering
    • Brake Type: Hydraulic
    • Operator Seat: Adjustable with suspension

2017 Mitsubishi FD30N

pneumatic tire 4 wheel sit down diesel

$23,000 USD
 
Instant Quote Eligible Listing - CLICK HERE!
CONTACT INFO
Name:
Sales Rep

ADDRESS
Global Fleet Solutions
17300 W Valley Hwy
SeattleWashington 98188
ATTRIBUTES
STOCK #:
EQU038046
YEAR:
2017
Manufacturer:
MODEL #:
CAPACITY:
6000
FUEL:
MAST TYPE:
MAST HEIGHT:
188 in
SERIAL #:
AF14G00153
SIDE SHIFTER:
Yes
HOUR METER:
3245
UNIT LOCATION:
POST DATE:
8/3/2026
Reviews
Useful
Not

The Mitsubishi FD30N forklift really stood out during our busy warehouse season. I remember loading up shipments, and this machine handled it all like a champ. The ride was smooth, and it glided over those rough patches without a hitch, which made long days feel a bit shorter. Plus, the visibility from the seat was surprisingly good, helping me navigate tight spaces without bumping into everything. It's pretty reliable too; I don't think we've had any major issues, which is a relief when you're on the clock. Overall, it's a solid truck that gets the job done without any fuss.



Review by Jake Thompson (12/3/2025)

  • General Specifications
    • Manufacturer: Mitsubishi
    • Model Number: FD30N
    • Type: Forklift
    • Subtype: Pneumatic Tire 4 Wheel Sit Down
  • Engine Specifications
    • Engine Manufacturer: Mitsubishi
    • Engine Type: Diesel
    • Engine Model: S4S
    • Number of Cylinders: 4
    • Displacement: 203 cubic inches
    • Power: Approximately 59 HP
  • Dimensions
    • Overall Length: Approximately 139 inches
    • Overall Width: Approximately 50 inches
    • Overall Height (Overhead Guard): Approximately 86 inches
    • Wheelbase: Approximately 70 inches
  • Performance
    • Load Capacity: 6,000 lbs
    • Tilt Angle Forward/Backward: 6/12 degrees
    • Travel Speed (Unloaded): Approximately 12.4 mph
    • Turning Radius: Approximately 95 inches
  • Tires
    • Type: Pneumatic
    • Front Tire Size: 7.00-12
    • Rear Tire Size: 6.00-9
  • Weights
    • Service Weight: Approximately 9,840 lbs
  • Hydraulic System
    • Hydraulic Tank Capacity: Approximately 11 gallons
  • Other Features
    • Steering: Hydrostatic power steering
    • Brake Type: Hydraulic
    • Operator Seat: Adjustable with suspension
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.


Call
Get Quote
Equipment Finder Equipment
finder
*All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Please correct the following