Eliftruck
BUY A FORKLIFT SELL A FORKLIFT RENT A FORKLIFT
Overview
Spec Sheet
Shipping/Freight
Spec Sheet
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.

  • Manufacturer: Heli
  • Model Number: CPCD25
  • Type: Forklift
  • Subtype: Pneumatic Tire 4 Wheel Sit Down
  • Fuel Type: Diesel
  • Dimensions & Weight
    • Length to Fork Face: Varies
    • Overall Width: Approximately 47 inches
    • Overall Height (cab): Approximately 86 inches
    • Wheelbase: Approximately 64 inches
    • Ground Clearance: Approximately 4.5 inches
    • Operating Weight: Approximately 8,000 lbs
  • Engine Specifications
    • Engine Type: Diesel
    • Engine Power: Approximately 60 horsepower
    • Cylinders: 4
    • Cubic Capacity: Approximately 148 cubic inches
  • Performance
    • Load Capacity: Approximately 5,000 lbs
    • Travel Speed: Up to 12 mph
    • Turning Radius: Approximately 85 inches
  • Tires
    • Type: Pneumatic
    • Size Front: 7.00-12
    • Size Rear: 6.00-9
  • Hydraulic System
    • Hydraulic Pump Type: Gear pump
    • Hydraulic Pressure: Approximately 2,900 psi

2017 Heli CPCD25

pneumatic tire 4 wheel sit down diesel

Call for price
 
CONTACT INFO
Name:
Matt Schwaller
Phone:

ADDRESS
Wiese USA - Baltimore
3051 Washington Blvd
BaltimoreMaryland 21230
ATTRIBUTES
STOCK #:
32833Z
YEAR:
2017
Manufacturer:
MODEL #:
CAPACITY:
5000
FUEL:
MAST TYPE:
MAST HEIGHT:
80 / 185 in
SERIAL #:
010251S2308
SIDE SHIFTER:
Yes
CONDITION:
Used
HOUR METER:
192
UNIT LOCATION:
DESCRIPTION:
80/185" TSU, S/S, Diesel, Painted
POST DATE:
5/19/2026
Reviews
Useful
Not

The Heli CPCD25 really impressed me during my time at a local warehouse where we used it for loading and unloading deliveries. Its stability on those heavy loads felt reassuring, especially when maneuvering around tight corners. I remember one day, it helped us clear out a jam after an unexpected delivery rush, and the diesel engine powered through without a hitch. The visibility from the operator's seat was pretty solid too, which is always a plus when you're surrounded by other equipment. Overall, it's a reliable workhorse that doesn’t mess around when it comes to getting tasks done.



Review by Mike Thompson (2/15/2025)

  • Manufacturer: Heli
  • Model Number: CPCD25
  • Type: Forklift
  • Subtype: Pneumatic Tire 4 Wheel Sit Down
  • Fuel Type: Diesel
  • Dimensions & Weight
    • Length to Fork Face: Varies
    • Overall Width: Approximately 47 inches
    • Overall Height (cab): Approximately 86 inches
    • Wheelbase: Approximately 64 inches
    • Ground Clearance: Approximately 4.5 inches
    • Operating Weight: Approximately 8,000 lbs
  • Engine Specifications
    • Engine Type: Diesel
    • Engine Power: Approximately 60 horsepower
    • Cylinders: 4
    • Cubic Capacity: Approximately 148 cubic inches
  • Performance
    • Load Capacity: Approximately 5,000 lbs
    • Travel Speed: Up to 12 mph
    • Turning Radius: Approximately 85 inches
  • Tires
    • Type: Pneumatic
    • Size Front: 7.00-12
    • Size Rear: 6.00-9
  • Hydraulic System
    • Hydraulic Pump Type: Gear pump
    • Hydraulic Pressure: Approximately 2,900 psi
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.


Call
Get Quote
Equipment Finder Equipment
finder
*All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Please correct the following