Eliftruck
BUY A FORKLIFT SELL A FORKLIFT RENT A FORKLIFT
Overview
Spec Sheet
Shipping/Freight
Equipment Description
NLEQ# 150489, 540 Hours, Propane, Side Shift, 5000# Capacity, 85" (Collapsed) Triple Mast / 189" Lift Height, Any Questions, Please Call Joe @ 215-781-2490! - Any Questions, Please contact Joe Dougherty @ 215-781-2490
Spec Sheet
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.

  • Manufacturer: Heli
  • Model Number: CPCD25
  • Type: Forklift
  • Subtype: Pneumatic Tire 4 Wheel Sit Down
  • Fuel Type: Diesel
  • Dimensions & Weight
    • Length to Fork Face: Varies
    • Overall Width: Approximately 47 inches
    • Overall Height (cab): Approximately 86 inches
    • Wheelbase: Approximately 64 inches
    • Ground Clearance: Approximately 4.5 inches
    • Operating Weight: Approximately 8,000 lbs
  • Engine Specifications
    • Engine Type: Diesel
    • Engine Power: Approximately 60 horsepower
    • Cylinders: 4
    • Cubic Capacity: Approximately 148 cubic inches
  • Performance
    • Load Capacity: Approximately 5,000 lbs
    • Travel Speed: Up to 12 mph
    • Turning Radius: Approximately 85 inches
  • Tires
    • Type: Pneumatic
    • Size Front: 7.00-12
    • Size Rear: 6.00-9
  • Hydraulic System
    • Hydraulic Pump Type: Gear pump
    • Hydraulic Pressure: Approximately 2,900 psi

2019 Heli CPCD25

pneumatic tire 4 wheel sit down lp gas

$19,875 USD
 
Instant Quote Eligible Listing - CLICK HERE!
CONTACT INFO
Name:
Sales

ADDRESS
National Lift Equipment
300 Pond St.
BristolPennsylvania 19007
ATTRIBUTES
STOCK #:
150489
YEAR:
2019
Manufacturer:
MODEL #:
CAPACITY:
5000
FUEL:
MAST TYPE:
MAST HEIGHT:
189 in
SIDE SHIFTER:
Yes
CONDITION:
Used
HOUR METER:
540
UNIT LOCATION:
Pennsylvania [19007]
POST DATE:
5/1/2026
Reviews
Useful
Not

The Heli CPCD25 really impressed me during my time at a local warehouse where we used it for loading and unloading deliveries. Its stability on those heavy loads felt reassuring, especially when maneuvering around tight corners. I remember one day, it helped us clear out a jam after an unexpected delivery rush, and the diesel engine powered through without a hitch. The visibility from the operator's seat was pretty solid too, which is always a plus when you're surrounded by other equipment. Overall, it's a reliable workhorse that doesn’t mess around when it comes to getting tasks done.



Review by Mike Thompson (3/5/2025)

  • Manufacturer: Heli
  • Model Number: CPCD25
  • Type: Forklift
  • Subtype: Pneumatic Tire 4 Wheel Sit Down
  • Fuel Type: Diesel
  • Dimensions & Weight
    • Length to Fork Face: Varies
    • Overall Width: Approximately 47 inches
    • Overall Height (cab): Approximately 86 inches
    • Wheelbase: Approximately 64 inches
    • Ground Clearance: Approximately 4.5 inches
    • Operating Weight: Approximately 8,000 lbs
  • Engine Specifications
    • Engine Type: Diesel
    • Engine Power: Approximately 60 horsepower
    • Cylinders: 4
    • Cubic Capacity: Approximately 148 cubic inches
  • Performance
    • Load Capacity: Approximately 5,000 lbs
    • Travel Speed: Up to 12 mph
    • Turning Radius: Approximately 85 inches
  • Tires
    • Type: Pneumatic
    • Size Front: 7.00-12
    • Size Rear: 6.00-9
  • Hydraulic System
    • Hydraulic Pump Type: Gear pump
    • Hydraulic Pressure: Approximately 2,900 psi
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.


Call
Get Quote
Equipment Finder Equipment
finder
*All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Please correct the following