64 Forklifts and Material Handling Equipment For Sale
Browse our complete selection of low priced used forklifts, lift trucks & material handling products for sale at locations near you. Compare prices here!
Compact Walk Behind Sweeper Scrubber from Advance Nilfisk
General Specifications:
Model Number: SC750 28C
Manufacturer: Nilfisk Advance
Type: Sweeper/Scrubber
Subtype: Walk Behind Scrubber
Dimensions:
Cleaning Width: 28 inches
Weight: Approx. 480 lbs (varies based on model configuration)
Height: Approx. 45 inches
Length: Approx. 56 inches
Width: Approx. 28 inches
Performance:
Brush Speed: 220 RPM
Solution Tank Capacity: 21 gallons
Recovery Tank Capacity: 21 gallons
Scrubbing Coverage: 26,000 square feet per hour
Power:
Voltage: 24V
Battery Type: Lead Acid or AGM
Run Time: Up to 4 hours
Features:
Adjustable Water Flow and Brush Pressure
Automatic Solution Dosing System
Ergonomic Handle Design
Intuitive Control Panel
Integrated Squeegee System
#5104 Mobile Alabama Tyler Cashin: (251) 259-1377 1111 West I-65 Service RD North Mobile, AL 36618
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Theoretical Cleaning Rate: Up to 47,917 square feet per hour
#5001 Bettendorf Iowa Dennis Marriott: 319-830-6542 5875 State St Bettendorf, IA 52722
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
2015 IPC Eagle CT100 walk-behind scrubber, 32" AS IS
Mid Atlantic Industrial Equipment LTD. Sales Dept.: 717-276-0588 1231 E Wallace St York, PA 17403
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Notes: Quote is valid for 7 days. Quotes are subject to credit approval and applicable taxes are not included. Any lead times are factory estimates and are not guaranteed. Units canceled by customer after 24 hours of placing order will be charged a 25% fee. Mid Atlantic reserves the option to add any surcharges/increases beyond its control OR cancel the order in which case the customer will not be charged any fee. Finance/lease rates are subject to change after 90 days on ordered equipment pending arrival. Inbound freight is estimated at time of quote but subject to the rate at time of shipping on ordered units.
Payment Terms: Purchased equipment is due net upon delivery. Credit card payments will incur a 3.5% fee.
Financed/Leased Equipment: Documentation must be completed and signed upon or before delivery. Equipment cannot be placed in service until finance and warranty documents are executed.
Specifications for Model SC500 X20D B Walk Behind Scrubber
Dimensions & Weight
Length: 4.37 feet
Width: 2.23 feet
Height: 3.54 feet
Weight without Batteries: 270 lbs
Scrubbing System
Cleaning Path Width: 20 inches
Squeegee Width: 30 inches
Brush/Pad Diameter: 20 inches
Brush Motor Power: 0.67 hp
Brush Speed: 160 rpm
Solution and Recovery System
Solution Tank Capacity: 13 gallons
Recovery Tank Capacity: 13 gallons
Vacuum Motor Power: 0.60 hp
Power System
Power Source: Electric
Batteries: 2 units / 12V each
Run Time: Up to 3.5 hours per charge
Charger: On-board, Smart Charger
Performance
Theoretical Productivity: 20,000 sq ft/h
Working Speed: 2.48 mph
Gradeability: Up to 2%
Additional Features
Control Panel: Intuitive, Simple to Operate
Noise Level: 63 dB(A)
Frame Material: Steel with Corrosion Resistance
Tank Material: Polyethylene
Safety Features: Emergency Stop
New Tec, Inc. Joe or Marlin: 866-369-0505 3764 US 75 Ave Sioux Center, IA 51250
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Maximum Cleaning Productivity Rate: 29,000 sq ft/hr
Tank Capacities
Solution Tank: 21 gallons
Recovery Tank: 21 gallons
Drive System
Drive Motor: 0.75 HP
Brush Motor: 0.6 HP
Brush System
Number of Brushes: 2 Disc
Brush Speed: 220 RPM
Additional Features
Adjustable Brush Pressure
Electric Drive
Simple Operator Controls
#5301 Billings Montana Lee VonHagen: (406)794-6011 3627 South 56th Street West Billings, MT 59101
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Miami Dade Melissa Machin: 305-885-5055 12612 NW S. River Drive Miami, FL 33178
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Miami Dade Melissa Machin: 305-885-5055 12612 NW S. River Drive Miami, FL 33178
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Hupp Toyota Lift Jay Miller: 319.550.8846 275 33rd Av SW Cedar Rapids, IA 52404
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Mid Atlantic Industrial Equipment LTD. Sales Dept.: 717-276-0588 1231 E Wallace St York, PA 17403
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Notes: Quote is valid for 7 days. Quotes are subject to credit approval and applicable taxes are not included. Any lead times are factory estimates and are not guaranteed. Units canceled by customer after 24 hours of placing order will be charged a 25% fee. Mid Atlantic reserves the option to add any surcharges/increases beyond its control OR cancel the order in which case the customer will not be charged any fee. Finance/lease rates are subject to change after 90 days on ordered equipment pending arrival. Inbound freight is estimated at time of quote but subject to the rate at time of shipping on ordered units.
Payment Terms: Purchased equipment is due net upon delivery. Credit card payments will incur a 3.5% fee.
Financed/Leased Equipment: Documentation must be completed and signed upon or before delivery. Equipment cannot be placed in service until finance and warranty documents are executed.
Forklift Consulting LLC Ed Valdes: 305-898-6428 6551 Lake Como Terrace Miami Lakes, FL 33014
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Forklift Consulting LLC Ed Valdes: 305-898-6428 6551 Lake Como Terrace Miami Lakes, FL 33014
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Control System: Intuitive control panel with indicator lights
Taylor's Forklift Repairs Inc. Cameron Taylor: 252-888-2018 1012 Taylor's Creek Drive Greenville, NC 28590
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Variable Down Pressure: Improves cleaning performance
Welch Denver Jack Thompson: 720-471-5014 4210 Carson Street Denver , CO 80239
USED LIFTS ARE PREPPED TO ORDER UNLESS OTHERWISE NOTED
AVERAGE LEAD TIME IS 6-8 WEEKS.
ALL CAPACITIES LISTED ARE BASIC CAPACITY FOR EQUIPMENT TYPE. CAPACITY LISTED DOES NOT INCLUDE ANY DERATE FOR ATTACHMENTS, FORKS OR OPTIONAL EQUIPMENT.
PRICES ARE EXCLUSIVE OF ANY SALES OR USE TAXES NOW IN FORCE. HOUR METER IS SUBJECT TO CHANGE.
YOUR SIGNATURE ON THIS PROPOSAL CONSTITUTES AN ORDER. ALL CANCELLED ORDERS WILL BE ASSESSED A 10% CANCELLATION FEE. PLEASE CALL YOUR WELCH REPRESENTATIVE FOR FURTHER INFORMATION.
Variable Down Pressure: Improves cleaning performance
Welch Denver Jack Thompson: 720-471-5014 4210 Carson Street Denver , CO 80239
USED LIFTS ARE PREPPED TO ORDER UNLESS OTHERWISE NOTED
AVERAGE LEAD TIME IS 6-8 WEEKS.
ALL CAPACITIES LISTED ARE BASIC CAPACITY FOR EQUIPMENT TYPE. CAPACITY LISTED DOES NOT INCLUDE ANY DERATE FOR ATTACHMENTS, FORKS OR OPTIONAL EQUIPMENT.
PRICES ARE EXCLUSIVE OF ANY SALES OR USE TAXES NOW IN FORCE. HOUR METER IS SUBJECT TO CHANGE.
YOUR SIGNATURE ON THIS PROPOSAL CONSTITUTES AN ORDER. ALL CANCELLED ORDERS WILL BE ASSESSED A 10% CANCELLATION FEE. PLEASE CALL YOUR WELCH REPRESENTATIVE FOR FURTHER INFORMATION.
Welch Denver Jack Thompson: 720-471-5014 4210 Carson Street Denver , CO 80239
USED LIFTS ARE PREPPED TO ORDER UNLESS OTHERWISE NOTED
AVERAGE LEAD TIME IS 6-8 WEEKS.
ALL CAPACITIES LISTED ARE BASIC CAPACITY FOR EQUIPMENT TYPE. CAPACITY LISTED DOES NOT INCLUDE ANY DERATE FOR ATTACHMENTS, FORKS OR OPTIONAL EQUIPMENT.
PRICES ARE EXCLUSIVE OF ANY SALES OR USE TAXES NOW IN FORCE. HOUR METER IS SUBJECT TO CHANGE.
YOUR SIGNATURE ON THIS PROPOSAL CONSTITUTES AN ORDER. ALL CANCELLED ORDERS WILL BE ASSESSED A 10% CANCELLATION FEE. PLEASE CALL YOUR WELCH REPRESENTATIVE FOR FURTHER INFORMATION.
Taylor's Forklift Repairs Inc. Cameron Taylor: 252-888-2018 1012 Taylor's Creek Drive Greenville, NC 28590
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Equipment
Close