23,738 Forklifts and Material Handling Equipment For Sale
Browse our complete selection of low priced used forklifts, lift trucks & material handling products for sale at locations near you. Compare prices here!
National Lift Fleet Leasing & Sales Sales Dept 201 North Rice Avenue Unit G Oxnard, CA 93030
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
National Lift Fleet Leasing & Sales Sales Dept 201 North Rice Avenue Unit G Oxnard, CA 93030
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
National Lift Fleet Leasing & Sales Sales Dept 201 North Rice Avenue Unit G Oxnard, CA 93030
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Subtype: Cushion Tire 4 Wheel Sit Down (Indoor Warehouse)
Fuel Type: LP Gas
Powertrain
Engine Type: Internal Combustion
Fuel System: LPG
Transmission Type: Automatic Powershift
Dimensions
Overall Length: Approximately 120 inches
Overall Width: Approximately 42 inches
Overall Height: Approximately 86 inches
Wheelbase: Approximately 55 inches
Turning Radius: Approximately 88 inches
Capacity
Load Capacity: 4,000 lbs
Load Center: 24 inches
Performance
Travel Speed (Loaded): Approximately 10 mph
Travel Speed (Unloaded): Approximately 11 mph
Lifting Speed (Loaded): Approximately 59 ft/min
Lifting Speed (Unloaded): Approximately 98 ft/min
Lowering Speed (Loaded): Approximately 98 ft/min
Lowering Speed (Unloaded): Approximately 98 ft/min
Tires
Front Tire Type: Cushion
Rear Tire Type: Cushion
Tire Size: Specific sizes may vary
Forks
Standard Fork Length: Varies
National Lift Fleet Leasing & Sales Sales Dept 201 North Rice Avenue Unit G Oxnard, CA 93030
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Overall Length: Approximately 128 inches (varies with fork length)
Overall Width: 46.5 inches
Tread, Front: 38.1 inches
Tread, Rear: 37.8 inches
Wheelbase: 59.8 inches
Performance
Load Capacity: 8,000 lbs
Travel Speed, Loaded: 10.6 mph
Travel Speed, Unloaded: 11.2 mph
Lift Speed, Loaded: 80 feet per minute
Lift Speed, Unloaded: 120 feet per minute
Turning Radius: 98.4 inches
Power & Drive
Drive Motor: Dual AC motors
Lift Motor: AC motor
Battery Capacity: 80V, 775 Ah
Wheels & Tires
Tires: Cushion
Tire Size, Front: 22 x 8 x 16 inches
Tire Size, Rear: 18 x 7 x 12.1 inches
Operator Environment
Steering: Power steering for ease of control
Seat: Fully adjustable with lumbar support
Display: Multifunction digital display for operational status
National Lift Fleet Leasing & Sales Sales Dept 201 North Rice Avenue Unit G Oxnard, CA 93030
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Overall Length: Approximately 128 inches (varies with fork length)
Overall Width: 46.5 inches
Tread, Front: 38.1 inches
Tread, Rear: 37.8 inches
Wheelbase: 59.8 inches
Performance
Load Capacity: 8,000 lbs
Travel Speed, Loaded: 10.6 mph
Travel Speed, Unloaded: 11.2 mph
Lift Speed, Loaded: 80 feet per minute
Lift Speed, Unloaded: 120 feet per minute
Turning Radius: 98.4 inches
Power & Drive
Drive Motor: Dual AC motors
Lift Motor: AC motor
Battery Capacity: 80V, 775 Ah
Wheels & Tires
Tires: Cushion
Tire Size, Front: 22 x 8 x 16 inches
Tire Size, Rear: 18 x 7 x 12.1 inches
Operator Environment
Steering: Power steering for ease of control
Seat: Fully adjustable with lumbar support
Display: Multifunction digital display for operational status
National Lift Fleet Leasing & Sales Sales Dept 201 North Rice Avenue Unit G Oxnard, CA 93030
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Overall Length: Approximately 128 inches (varies with fork length)
Overall Width: 46.5 inches
Tread, Front: 38.1 inches
Tread, Rear: 37.8 inches
Wheelbase: 59.8 inches
Performance
Load Capacity: 8,000 lbs
Travel Speed, Loaded: 10.6 mph
Travel Speed, Unloaded: 11.2 mph
Lift Speed, Loaded: 80 feet per minute
Lift Speed, Unloaded: 120 feet per minute
Turning Radius: 98.4 inches
Power & Drive
Drive Motor: Dual AC motors
Lift Motor: AC motor
Battery Capacity: 80V, 775 Ah
Wheels & Tires
Tires: Cushion
Tire Size, Front: 22 x 8 x 16 inches
Tire Size, Rear: 18 x 7 x 12.1 inches
Operator Environment
Steering: Power steering for ease of control
Seat: Fully adjustable with lumbar support
Display: Multifunction digital display for operational status
National Lift Fleet Leasing & Sales Sales Dept 201 North Rice Avenue Unit G Oxnard, CA 93030
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Overall Length: Approximately 128 inches (varies with fork length)
Overall Width: 46.5 inches
Tread, Front: 38.1 inches
Tread, Rear: 37.8 inches
Wheelbase: 59.8 inches
Performance
Load Capacity: 8,000 lbs
Travel Speed, Loaded: 10.6 mph
Travel Speed, Unloaded: 11.2 mph
Lift Speed, Loaded: 80 feet per minute
Lift Speed, Unloaded: 120 feet per minute
Turning Radius: 98.4 inches
Power & Drive
Drive Motor: Dual AC motors
Lift Motor: AC motor
Battery Capacity: 80V, 775 Ah
Wheels & Tires
Tires: Cushion
Tire Size, Front: 22 x 8 x 16 inches
Tire Size, Rear: 18 x 7 x 12.1 inches
Operator Environment
Steering: Power steering for ease of control
Seat: Fully adjustable with lumbar support
Display: Multifunction digital display for operational status
National Lift Fleet Leasing & Sales Sales Dept 201 North Rice Avenue Unit G Oxnard, CA 93030
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Overall Length: Approximately 128 inches (varies with fork length)
Overall Width: 46.5 inches
Tread, Front: 38.1 inches
Tread, Rear: 37.8 inches
Wheelbase: 59.8 inches
Performance
Load Capacity: 8,000 lbs
Travel Speed, Loaded: 10.6 mph
Travel Speed, Unloaded: 11.2 mph
Lift Speed, Loaded: 80 feet per minute
Lift Speed, Unloaded: 120 feet per minute
Turning Radius: 98.4 inches
Power & Drive
Drive Motor: Dual AC motors
Lift Motor: AC motor
Battery Capacity: 80V, 775 Ah
Wheels & Tires
Tires: Cushion
Tire Size, Front: 22 x 8 x 16 inches
Tire Size, Rear: 18 x 7 x 12.1 inches
Operator Environment
Steering: Power steering for ease of control
Seat: Fully adjustable with lumbar support
Display: Multifunction digital display for operational status
National Lift Fleet Leasing & Sales Sales Dept 201 North Rice Avenue Unit G Oxnard, CA 93030
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Overall Length: Approximately 128 inches (varies with fork length)
Overall Width: 46.5 inches
Tread, Front: 38.1 inches
Tread, Rear: 37.8 inches
Wheelbase: 59.8 inches
Performance
Load Capacity: 8,000 lbs
Travel Speed, Loaded: 10.6 mph
Travel Speed, Unloaded: 11.2 mph
Lift Speed, Loaded: 80 feet per minute
Lift Speed, Unloaded: 120 feet per minute
Turning Radius: 98.4 inches
Power & Drive
Drive Motor: Dual AC motors
Lift Motor: AC motor
Battery Capacity: 80V, 775 Ah
Wheels & Tires
Tires: Cushion
Tire Size, Front: 22 x 8 x 16 inches
Tire Size, Rear: 18 x 7 x 12.1 inches
Operator Environment
Steering: Power steering for ease of control
Seat: Fully adjustable with lumbar support
Display: Multifunction digital display for operational status
National Lift Fleet Leasing & Sales Sales Dept 201 North Rice Avenue Unit G Oxnard, CA 93030
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Overall Length: Approximately 128 inches (varies with fork length)
Overall Width: 46.5 inches
Tread, Front: 38.1 inches
Tread, Rear: 37.8 inches
Wheelbase: 59.8 inches
Performance
Load Capacity: 8,000 lbs
Travel Speed, Loaded: 10.6 mph
Travel Speed, Unloaded: 11.2 mph
Lift Speed, Loaded: 80 feet per minute
Lift Speed, Unloaded: 120 feet per minute
Turning Radius: 98.4 inches
Power & Drive
Drive Motor: Dual AC motors
Lift Motor: AC motor
Battery Capacity: 80V, 775 Ah
Wheels & Tires
Tires: Cushion
Tire Size, Front: 22 x 8 x 16 inches
Tire Size, Rear: 18 x 7 x 12.1 inches
Operator Environment
Steering: Power steering for ease of control
Seat: Fully adjustable with lumbar support
Display: Multifunction digital display for operational status
National Lift Fleet Leasing & Sales Sales Dept 201 North Rice Avenue Unit G Oxnard, CA 93030
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Overall Length: Approximately 128 inches (varies with fork length)
Overall Width: 46.5 inches
Tread, Front: 38.1 inches
Tread, Rear: 37.8 inches
Wheelbase: 59.8 inches
Performance
Load Capacity: 8,000 lbs
Travel Speed, Loaded: 10.6 mph
Travel Speed, Unloaded: 11.2 mph
Lift Speed, Loaded: 80 feet per minute
Lift Speed, Unloaded: 120 feet per minute
Turning Radius: 98.4 inches
Power & Drive
Drive Motor: Dual AC motors
Lift Motor: AC motor
Battery Capacity: 80V, 775 Ah
Wheels & Tires
Tires: Cushion
Tire Size, Front: 22 x 8 x 16 inches
Tire Size, Rear: 18 x 7 x 12.1 inches
Operator Environment
Steering: Power steering for ease of control
Seat: Fully adjustable with lumbar support
Display: Multifunction digital display for operational status
National Lift Fleet Leasing & Sales Sales Dept 201 North Rice Avenue Unit G Oxnard, CA 93030
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Mid Atlantic Industrial Equipment LTD. Sales Dept. 1231 E Wallace St York, PA 17403
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Notes: Quote is valid for 7 days. Quotes are subject to credit approval and applicable taxes are not included. Any lead times are factory estimates and are not guaranteed. Units canceled by customer after 24 hours of placing order will be charged a 25% fee. Mid Atlantic reserves the option to add any surcharges/increases beyond its control OR cancel the order in which case the customer will not be charged any fee. Finance/lease rates are subject to change after 90 days on ordered equipment pending arrival. Inbound freight is estimated at time of quote but subject to the rate at time of shipping on ordered units.
Payment Terms: Purchased equipment is due net upon delivery. Credit card payments will incur a 3.5% fee.
Financed/Leased Equipment: Documentation must be completed and signed upon or before delivery. Equipment cannot be placed in service until finance and warranty documents are executed.
2011 Cascade 7000lb Fork Clamp, 1 3/4X5X42" Class 3 forks
General Specifications
Model Number: 70D-FPB-02B
Manufacturer: Cascade
Type: Attachment
Subtype: Fork Clamps
Dimensions
Width: Approximately 54 inches
Height: Approximately 39 inches
Depth: Approximately 26 inches
Fork Clamping Range: Varies based on application and fork specifications
Weight
Attachment Weight: Approximately 1,550 lbs
Capacity
Load Capacity: 7,000 lbs
Performance
Hydraulic Operating Pressure: 2,000 psi
Flow Rate: 10 gallons per minute
Construction
Frame Material: High-strength steel
Finish: Powder coating for durability
Compatibility
Mounting Type: Standard forklift carriage interface
Fork Length: Varies
Sam's Mechanical Service Sam Stoltzfus 5917 Plank Road Narvon, PA 17555
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Used Rightline side shifting fork clamp, 48" forks
Mid Atlantic Industrial Equipment LTD. Sales Dept. 1231 E Wallace St York, PA 17403
Notes: Quote is valid for 7 days. Quotes are subject to credit approval and applicable taxes are not included. Any lead times are factory estimates and are not guaranteed. Units canceled by customer after 24 hours of placing order will be charged a 25% fee. Mid Atlantic reserves the option to add any surcharges/increases beyond its control OR cancel the order in which case the customer will not be charged any fee. Finance/lease rates are subject to change after 90 days on ordered equipment pending arrival. Inbound freight is estimated at time of quote but subject to the rate at time of shipping on ordered units.
Payment Terms: Purchased equipment is due net upon delivery. Credit card payments will incur a 3.5% fee.
Financed/Leased Equipment: Documentation must be completed and signed upon or before delivery. Equipment cannot be placed in service until finance and warranty documents are executed.
Used Cascade side shifting fork positioner, 48" coil forks
Mid Atlantic Industrial Equipment LTD. Sales Dept. 1231 E Wallace St York, PA 17403
Notes: Quote is valid for 7 days. Quotes are subject to credit approval and applicable taxes are not included. Any lead times are factory estimates and are not guaranteed. Units canceled by customer after 24 hours of placing order will be charged a 25% fee. Mid Atlantic reserves the option to add any surcharges/increases beyond its control OR cancel the order in which case the customer will not be charged any fee. Finance/lease rates are subject to change after 90 days on ordered equipment pending arrival. Inbound freight is estimated at time of quote but subject to the rate at time of shipping on ordered units.
Payment Terms: Purchased equipment is due net upon delivery. Credit card payments will incur a 3.5% fee.
Financed/Leased Equipment: Documentation must be completed and signed upon or before delivery. Equipment cannot be placed in service until finance and warranty documents are executed.
Yellow Enterprises Sales Dept 1709 South Greenwood Ave. Montebello, CA 90640
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Welch Equipment Company Inc Keith Fine 5025 Nome St Denver, CO 80239
USED LIFTS ARE PREPPED TO ORDER UNLESS OTHERWISE NOTED
AVERAGE LEAD TIME IS 6-8 WEEKS.
ALL CAPACITIES LISTED ARE BASIC CAPACITY FOR EQUIPMENT TYPE. CAPACITY LISTED DOES NOT INCLUDE ANY DERATE FOR ATTACHMENTS, FORKS OR OPTIONAL EQUIPMENT.
PRICES ARE EXCLUSIVE OF ANY SALES OR USE TAXES NOW IN FORCE. HOUR METER IS SUBJECT TO CHANGE.
YOUR SIGNATURE ON THIS PROPOSAL CONSTITUTES AN ORDER. ALL CANCELLED ORDERS WILL BE ASSESSED A 10% CANCELLATION FEE. PLEASE CALL YOUR WELCH REPRESENTATIVE FOR FURTHER INFORMATION.
3st 86/185 Mast, Side Shift & Fork-Positioner, 80V, 48" Fork
**General Specifications**
- **Model Number**: E25S
- **Manufacturer**: Linde
- **Type**: Forklift
- **Subtype**: Electric 4 Wheel Sit Down
- **Fuel Type Used**: Electric
**Performance**
- **Load Capacity**: 5,500 lbs
- **Travel Speed**: Approximately 11 mph (without load)
- **Lift Speed**: Approximately 2.4 feet/second (without load)
- **Gradeability**: Up to 20% (depending on load)
**Dimensions**
- **Overall Length**: Approximately 138 inches (varies with specific configurations)
- **Overall Width**: Approximately 48 inches
- **Wheelbase**: Approximately 60 inches
- **Turning Radius**: Approximately 78 inches
- **Fork Length**: Varies
**Weights**
- **Service Weight**: Approximately 9,950 lbs (includes battery weight)
**Power System**
- **Battery Voltage**: 80V
- **Battery Capacity**: Varies (typical capacities range for different operational needs)
- **Drive Motor Power**: Approximately 20 kW
**Tires**
- **Type**: Pneumatic or cushion options available, depending on specific application needs
- **Front Tire Size**: Approximately 23 x 10 inches
- **Rear Tire Size**: Approximately 18 x 8 inches
**Operator Environment**
- **Seating**: Ergonomic, adjustable seating
- **Steering**: Hydraulic power steering
- **Controls**: Fingertip hydraulic controls for precise load handling
- **Visibility**: Designed for optimal operator visibility
**Safety Features**
- **Braking System**: Electric regenerative braking
- **Stability Feature**: Linde Load Control for enhanced safety and ease of use
- **Lighting**: Standard work lights and optional LED packages available
**Additional Features**
- **Display**: Multi-function digital display for monitoring forklift status
- **Cooling System**: Integrated thermal management for motor and control electronics
- **Customization**: Various options for attachments and configurations to suit specific applications
New Tec Joe Tokeim 3764 US 75 Ave Sioux Center, IA 51250
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
3st 187" Mast, Side Shift & Fork-Positioner, Gas, 48" Forks
New Tec, Inc. Joe or Marlin 3764 US 75 Ave Sioux Center, IA 51250
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.