Eliftruck
BUY A FORKLIFT SELL A FORKLIFT RENT A FORKLIFT
Overview
Spec Sheet
Shipping/Freight
Equipment Description
3500# LP PNEUMATIC, 188/84.5 TRIPLEX MAST, SGL FNCT HOSING, HANG ON S/S, 48" FORKS, LP TANK, SOLID DRIVES, SOLID STEERS FILE PHOTO REFLECTING APPEARANCE OF THIS UNIT. FORKLIFT IS CURRENTLY UNGERGOING RECONDITIONING Regulatory Marking Emissions Level
Spec Sheet
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.

  • General Information
    • Model Number: FG18N
    • Manufacturer: Mitsubishi
    • Type: Forklift
    • Subtype: Pneumatic Tire, 4 Wheel Sit Down
  • Dimensions
    • Overall Width: 42.1 inches
    • Overall Length (without forks): 85.8 inches
    • Overall Height (to top of overhead guard): 82.7 inches
    • Wheelbase: 55.1 inches
    • Ground Clearance (at lowest point): 4.3 inches
  • Performance
    • Load Capacity: 3,500 lbs
    • Load Center: 24 inches
    • Travel Speed (laden): 11.8 mph
    • Travel Speed (unladen): 12.4 mph
  • Weight
    • Service Weight: 6,527 lbs
  • Engine
    • Engine Model: K21
    • Power Output: 45.3 HP
    • Fuel Type: LP Gas
  • Wheels and Tires
    • Tire Type: Pneumatic
    • Front Tire Size: 7.00-12
    • Rear Tire Size: 6.00-9
  • Brakes
    • Service Brake: Hydraulic
    • Parking Brake: Mechanical Lever
  • Steering
    • Steering Type: Hydraulic Power Steering
    • Turning Radius: 77.0 inches
  • Hydraulics
    • Hydraulic Pressure: 2,755 psi
Warranty
WARRANTY: 30 DAYS/150 HOURS PARTS & LABOR ON ALL COMPONENTS; AND 12 MONTHS/2000 HOURS LIMITED POWERTRAIN. Equipment quoted is subject to prior sale. Finance options are subject to credit approval. Quote doesn't include delivery or sales tax unless stated.

2019 Mitsubishi FG18N

pneumatic tire 4 wheel sit down lp gas

$17,900 USD
 
Instant Quote Eligible Listing - CLICK HERE!
CONTACT INFO
Name:
David
Phone:
Fax:

ADDRESS
Holt of California
3850 Channel Dr
W SacramentoCalifornia 95691
ATTRIBUTES
STOCK #:
LO19-107
YEAR:
2019
Manufacturer:
MODEL #:
CAPACITY:
3500
FUEL:
MAST TYPE:
MAST HEIGHT:
188 / 84.5 in
SERIAL #:
AF34A00867
SIDE SHIFTER:
Yes
CONDITION:
Used
HOUR METER:
4752
UNIT LOCATION:
California [95691]
POST DATE:
6/8/2026
Reviews
Useful
Not

The Mitsubishi FG18N forklift has been a solid addition to our warehouse operations. After using it for a few months now, I've appreciated how smooth the steering feels, making it way easier to navigate tight spots without breaking a sweat. A buddy of mine, who's been in the industry for years, recommended Mitsubishi, and I can see why; it's reliable and does the job well. The comfort of the seat is a nice bonus, especially during those long shifts when you’re just moving pallets all day. Overall, it strikes the right balance between power and ease of use. Definitely worth considering if you're in the market for a dependable forklift.



Review by Mike Anderson (4/6/2025)

  • General Information
    • Model Number: FG18N
    • Manufacturer: Mitsubishi
    • Type: Forklift
    • Subtype: Pneumatic Tire, 4 Wheel Sit Down
  • Dimensions
    • Overall Width: 42.1 inches
    • Overall Length (without forks): 85.8 inches
    • Overall Height (to top of overhead guard): 82.7 inches
    • Wheelbase: 55.1 inches
    • Ground Clearance (at lowest point): 4.3 inches
  • Performance
    • Load Capacity: 3,500 lbs
    • Load Center: 24 inches
    • Travel Speed (laden): 11.8 mph
    • Travel Speed (unladen): 12.4 mph
  • Weight
    • Service Weight: 6,527 lbs
  • Engine
    • Engine Model: K21
    • Power Output: 45.3 HP
    • Fuel Type: LP Gas
  • Wheels and Tires
    • Tire Type: Pneumatic
    • Front Tire Size: 7.00-12
    • Rear Tire Size: 6.00-9
  • Brakes
    • Service Brake: Hydraulic
    • Parking Brake: Mechanical Lever
  • Steering
    • Steering Type: Hydraulic Power Steering
    • Turning Radius: 77.0 inches
  • Hydraulics
    • Hydraulic Pressure: 2,755 psi
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.


Call
Get Quote
Equipment Finder Equipment
finder
Please correct the following