Overview
Spec Sheet
Shipping/Freight
Spec Sheet
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.

  • Manufacturer: Taylor
  • Model Number: TXI700L
  • Type: Forklift
  • Subtype: Pneumatic Tire 4 Wheel Sit Down
  • Fuel Type: Diesel
  • Load Capacity: Approximately 15,400 - 15,900 lbs
  • Engine: Diesel engine; specific specifications are model-dependent
  • Transmission: Automatic transmission
  • Tires: Pneumatic tires suitable for rough terrain
  • Operator Position: Sit down
  • Dimensions:
    • Overall Length: Approximately 180 - 200 inches
    • Width: Around 84 inches
    • Height to Top of Overhead Guard: Around 110 - 120 inches
  • Performance:
    • Travel Speed Loaded: Approximately 16 - 19 mph
    • Travel Speed Unloaded: Approximately 20 - 24 mph
    • Lift Speed Loaded: Approximately 60 - 70 feet per minute
  • Fork Specifications:
    • Length: Varies
    • Width: Typically around 6 inches
    • Thickness: Approximately 2 inches
  • Turning Radius: About 130 - 150 inches
  • Weight: Approximately 30,000 - 35,000 lbs

2013 Taylor TXI700L

Buy or Rent

pneumatic tire 4 wheel sit down diesel

Call for price
 
CONTACT INFO
Name:
Mike Marrs
Phone:
Website:

ADDRESS
Cal-Lift Inc
13027 Crossroads Parkway South
City of IndustryCalifornia 91746
ATTRIBUTES
STOCK #:
33254R
YEAR:
2013
Manufacturer:
MODEL #:
CAPACITY:
70000
FUEL:
MAST TYPE:
MAST HEIGHT:
180 in
SERIAL #:
38425
SIDE SHIFTER:
Yes
CONDITION:
Used/Rental
UNIT LOCATION:
California [91746]
POST DATE:
11/12/2025
Reviews
Useful
Not

The Taylor TXI700L forklift has been a game-changer for our warehouse operations. Having spent some time driving it around, I can vouch for its smooth handling, especially when navigating through tight spaces. It feels incredibly sturdy, which is great when you're lifting heavier loads – I remember how nervous I was the first time I had to stack boxes high, but this forklift made me feel secure. The diesel fuel doesn't hurt either; it really packs a punch and keeps going all day. Overall, it's a solid choice for anyone looking to boost efficiency without compromising on safety or reliability.



Review by Jake Thompson (10/17/2025)

  • Manufacturer: Taylor
  • Model Number: TXI700L
  • Type: Forklift
  • Subtype: Pneumatic Tire 4 Wheel Sit Down
  • Fuel Type: Diesel
  • Load Capacity: Approximately 15,400 - 15,900 lbs
  • Engine: Diesel engine; specific specifications are model-dependent
  • Transmission: Automatic transmission
  • Tires: Pneumatic tires suitable for rough terrain
  • Operator Position: Sit down
  • Dimensions:
    • Overall Length: Approximately 180 - 200 inches
    • Width: Around 84 inches
    • Height to Top of Overhead Guard: Around 110 - 120 inches
  • Performance:
    • Travel Speed Loaded: Approximately 16 - 19 mph
    • Travel Speed Unloaded: Approximately 20 - 24 mph
    • Lift Speed Loaded: Approximately 60 - 70 feet per minute
  • Fork Specifications:
    • Length: Varies
    • Width: Typically around 6 inches
    • Thickness: Approximately 2 inches
  • Turning Radius: About 130 - 150 inches
  • Weight: Approximately 30,000 - 35,000 lbs
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.


Call
Get Quote
Equipment Finder Equipment
finder
*All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Please correct the following