Eliftruck
BUY A FORKLIFT SELL A FORKLIFT RENT A FORKLIFT
Overview
Spec Sheet
Shipping/Freight
Equipment Description
9450 Hours 2020 used TAYLOR XLS-1000 for sale. Global has over 2000 pieces of used equipment in stock. Inquire today about Stock #GU003175, Stock Number: GU003175, Make: TAYLOR, Model: XLS-1000, Year: 2020, Auxilliary Hydralic Valves: 5, Brakes: standard, Capacity: 100000 Lbs, Carriage: SSFP, Carriage Width: 120.00", Fork Length: 96.00", Fork Taper: Pallet, Fork Thickness: 2.00", Full Free Height: 0.00", Load Center: 48", Mast: Duplex, Max Fork Height: 180.00", Overall Lowered Height: 155.00", Operator Protection: Enclosed Cab, Hours: 9450, Chassis: 2 Wheel Drive, Fuel: Diesel
Spec Sheet
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.

  • General Information
    • Model Number: XLS-1000
    • Manufacturer: Taylor
    • Type: Forklift
    • Subtype: Pneumatic Tire 4 Wheel Sit Down
    • Fuel Type: Diesel
  • Dimensions
    • Overall Length: 192 inches
    • Overall Width: 88 inches
    • Overall Height: 120 inches
    • Wheelbase: 115 inches
    • Ground Clearance: 12 inches
  • Weight
    • Operating Weight: 30,000 lbs
    • Counterweight: 10,000 lbs
  • Performance
    • Load Capacity: 22,000 lbs
    • Tilt Angle: +/- 15 degrees
    • Travel Speed: 18 mph
    • Lift Speed: 80 feet per minute
  • Engine Specifications
    • Engine Type: 4-cylinder turbocharged diesel
    • Engine Output: 125 HP
    • Fuel Tank Capacity: 50 gallons
  • Tires
    • Front Tires: Pneumatic 28x12
    • Rear Tires: Pneumatic 28x12
  • Hydraulics
    • Hydraulic System Pressure: 2500 psi
    • Hydraulic Flow Rate: 35 gallons per minute
  • Forks
    • Fork Length: Varies
    • Fork Width: 8 inches
    • Fork Thickness: 2 inches
  • Brakes
    • Braking System: Wet Disc
    • Parking Brake: Mechanical
  • Operational Features
    • Steering: Power Steering
    • Operator Seat: Adjustable with Suspension
    • Control Type: Hydraulic Joystick
  • Electrical
    • Voltage: 24V
    • Alternator Output: 80 Amps
    • Lighting: LED

2020 Taylor XLS-1000

pneumatic tire 4 wheel sit down diesel

$480,000 USD
 
Instant Quote Eligible Listing - CLICK HERE!
CONTACT INFO
Name:
Sales Rep

ADDRESS
Global Fleet Solutions
17300 W Valley Hwy
SeattleWashington 98188
ATTRIBUTES
STOCK #:
GU003175
YEAR:
2020
Manufacturer:
MODEL #:
CAPACITY:
100000
FUEL:
MAST TYPE:
MAST HEIGHT:
180 in
SERIAL #:
S-HF-44761
SIDE SHIFTER:
Yes
HOUR METER:
9450
UNIT LOCATION:
POST DATE:
5/14/2026
Reviews
Useful
Not

The Taylor XLS-1000 forklift really impressed me during my last warehouse gig. Its pneumatic tires give it a solid grip on rough terrain, making it a breeze to navigate even when the loading dock is a bit uneven. I remember when we had to move a ton of pallets in a short window, and this beast powered through, showing off its impressive lifting capacity without breaking a sweat. The diesel engine was surprisingly quiet too, which made those long shifts a bit more bearable. Overall, it’s a reliable workhorse that I would definitely recommend for anyone needing a tough forklift for heavy-duty tasks.



Review by Jake Thompson (3/6/2025)

  • General Information
    • Model Number: XLS-1000
    • Manufacturer: Taylor
    • Type: Forklift
    • Subtype: Pneumatic Tire 4 Wheel Sit Down
    • Fuel Type: Diesel
  • Dimensions
    • Overall Length: 192 inches
    • Overall Width: 88 inches
    • Overall Height: 120 inches
    • Wheelbase: 115 inches
    • Ground Clearance: 12 inches
  • Weight
    • Operating Weight: 30,000 lbs
    • Counterweight: 10,000 lbs
  • Performance
    • Load Capacity: 22,000 lbs
    • Tilt Angle: +/- 15 degrees
    • Travel Speed: 18 mph
    • Lift Speed: 80 feet per minute
  • Engine Specifications
    • Engine Type: 4-cylinder turbocharged diesel
    • Engine Output: 125 HP
    • Fuel Tank Capacity: 50 gallons
  • Tires
    • Front Tires: Pneumatic 28x12
    • Rear Tires: Pneumatic 28x12
  • Hydraulics
    • Hydraulic System Pressure: 2500 psi
    • Hydraulic Flow Rate: 35 gallons per minute
  • Forks
    • Fork Length: Varies
    • Fork Width: 8 inches
    • Fork Thickness: 2 inches
  • Brakes
    • Braking System: Wet Disc
    • Parking Brake: Mechanical
  • Operational Features
    • Steering: Power Steering
    • Operator Seat: Adjustable with Suspension
    • Control Type: Hydraulic Joystick
  • Electrical
    • Voltage: 24V
    • Alternator Output: 80 Amps
    • Lighting: LED
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.


Call
Get Quote
Equipment Finder Equipment
finder
*All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Please correct the following