Overview
Spec Sheet
Shipping/Freight
Equipment Description
1663 Hours 2022 used TAYLOR X250M for sale. Global has over 2000 pieces of used equipment in stock. Inquire today about Stock #EQC039794, Stock Number: EQC039794, Make: TAYLOR, Model: X250M, Year: 2022, Auxilliary Hydralic Valves: 0, Capacity: 25000 Lbs, Carriage: SSFP, Carriage Width: 103.00", Fork Length: 48.00", Fork Taper: 2 Stage Lumber, Fork Thickness: 2.00", Fork Width: 15.00", Full Free Height: 40.00", Load Center: 24", Mast: Duplex, Max Fork Height: 180.00", Overall Lowered Height: 139.00", Operator Protection: Enclosed Cab, Rear Tires: Standard Pneumatic, Hours: 1663, Chassis: 4 Wheel Drive, Fuel: Diesel
Spec Sheet
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.

  • General Information
    • Model Number: X250M
    • Manufacturer: Taylor
    • Type: Forklift
    • Subtype: Pneumatic Tire 4 Wheel Sit Down
  • Dimensions
    • Length to Fork Face: Varies
    • Overall Width: Approximately 84 inches
    • Overall Height: Approximately 120 inches
    • Wheelbase: Approximately 120 inches
    • Ground Clearance: Approximately 8 inches
  • Powertrain
    • Engine Type: Diesel
    • Engine Output: Approximately 110 HP
    • Transmission Type: Powershift
    • Number of Speeds: 3 Forward / 3 Reverse
  • Performance
    • Load Capacity: 25,000 lbs
    • Travel Speed: Approximately 18 mph
    • Turning Radius: Approximately 160 inches
  • Tires
    • Tire Type: Pneumatic
    • Number of Wheels: 4
    • Tire Size: Front 12.00 x 20, Rear 12.00 x 20
  • Hydraulic System
    • Pump Flow: Approximately 30 gallons per minute
    • Operating Pressure: Approximately 3,500 psi
  • Operator Environment
    • Seat Type: Adjustable with Suspension
    • Steering: Hydraulic Power Steering
    • Instrumentation: Digital Display
    • Noise Level: Approximately 75 dB

2022 Taylor X250M

pneumatic tire 4 wheel sit down diesel

$229,000 USD
 
Instant Quote Eligible Listing - CLICK HERE!
CONTACT INFO
Name:
Sales Rep

ADDRESS
Global Fleet Solutions
17300 W Valley Hwy
SeattleWashington 98188
ATTRIBUTES
STOCK #:
EQC039794
YEAR:
2022
Manufacturer:
MODEL #:
CAPACITY:
25000
FUEL:
MAST TYPE:
MAST HEIGHT:
180 in
SERIAL #:
S-GC-47531
SIDE SHIFTER:
Yes
HOUR METER:
1663
UNIT LOCATION:
POST DATE:
3/2/2026
Reviews
Useful
Not

The Taylor X250M is a solid choice for those in need of a reliable pneumatic tire forklift. Having spent a few weeks operating one at a local warehouse, I was impressed by its stability and ease of maneuverability, even in tight spots. The comfort level offered by the sit-down design made those long shifts a lot more bearable, allowing me to focus on getting the job done without straining my back. What really stood out was its ability to handle various loads with ease; a couple of coworkers were amazed at how smoothly it handled heavier pallets compared to some of the older models we've used. Overall, it’s a dependable piece of machinery that feels like a workhorse. If you're looking for a forklift that won't let you down, give the X250M a shot.



Review by Jake Henderson (2/1/2025)

  • General Information
    • Model Number: X250M
    • Manufacturer: Taylor
    • Type: Forklift
    • Subtype: Pneumatic Tire 4 Wheel Sit Down
  • Dimensions
    • Length to Fork Face: Varies
    • Overall Width: Approximately 84 inches
    • Overall Height: Approximately 120 inches
    • Wheelbase: Approximately 120 inches
    • Ground Clearance: Approximately 8 inches
  • Powertrain
    • Engine Type: Diesel
    • Engine Output: Approximately 110 HP
    • Transmission Type: Powershift
    • Number of Speeds: 3 Forward / 3 Reverse
  • Performance
    • Load Capacity: 25,000 lbs
    • Travel Speed: Approximately 18 mph
    • Turning Radius: Approximately 160 inches
  • Tires
    • Tire Type: Pneumatic
    • Number of Wheels: 4
    • Tire Size: Front 12.00 x 20, Rear 12.00 x 20
  • Hydraulic System
    • Pump Flow: Approximately 30 gallons per minute
    • Operating Pressure: Approximately 3,500 psi
  • Operator Environment
    • Seat Type: Adjustable with Suspension
    • Steering: Hydraulic Power Steering
    • Instrumentation: Digital Display
    • Noise Level: Approximately 75 dB
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.


Call
Get Quote
Equipment Finder Equipment
finder
*All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Please correct the following