Overview
Spec Sheet
Shipping/Freight
Equipment Description
2885 Hours 2021 used CAT DP50CN1 for sale. Global has over 2000 pieces of used equipment in stock. Inquire today about Stock #EQC036658, Stock Number: EQC036658, Make: CAT, Model: DP50CN1, Year: 2021, Auxilliary Hydralic Valves: 0, Capacity: 10000 Lbs, Carriage: S/S, Carriage Width: 47.00", Fork Length: 48.00", Fork Taper: FTP, Fork Thickness: 1.50", Fork Width: 8.00", Full Free Height: 0.00", Load Center: 24", Mast: Triplex, Max Fork Height: 172.00", Overall Lowered Height: 88.00", Operator Protection: Open Overhead Guard, Rear Tires: Solid Pneumatic, Hours: 2885, Chassis: 2 Wheel Drive, Fuel: Diesel
Spec Sheet
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.

  • General Specifications
    • Model Number: DP50CN1
    • Manufacturer: Caterpillar
    • Type: Forklift
    • Subtype: Pneumatic Tire 4 Wheel Sit Down
  • Dimensions
    • Overall Length: Approximately 137 inches (excluding forks)
    • Overall Width: Approximately 59 inches
    • Height to Overhead Guard: Approximately 88 inches
    • Wheelbase: Approximately 89 inches
    • Ground Clearance: Approximately 6.5 inches at center of wheelbase
  • Performance
    • Load Capacity: 11,000 lbs
    • Load Center: 24 inches
    • Maximum Fork Length: Varies
    • Travel Speed: Approximately 12.4 mph without load
    • Lifting Speed: Approximately 98 feet per minute with load
    • Lowering Speed: Approximately 99 feet per minute with load
  • Engine
    • Engine Model: S6S
    • Fuel Type: Diesel
    • Rated Power: Approximately 81 HP
    • Number of Cylinders: 6
    • Torque: Approximately 244 lb-ft at 1400 RPM
  • Hydraulics
    • Hydraulic System Pressure: Approximately 3,550 psi
  • Tires
    • Tire Type: Pneumatic
    • Front Tire Size: 8.25-15
    • Rear Tire Size: 8.25-15
  • Steering and Braking
    • Steering: Hydraulic Power Steering
    • Brakes: Hydraulic Wet Disc Brakes
  • Operator Comfort
    • Seat: Fully Adjustable
    • Steering Wheel: Tilt Adjustable
  • Additional Features
    • Multi-function Display
    • Safety Overhead Guard
    • Operator Presence System

2021 Cat DP50CN1

pneumatic tire 4 wheel sit down diesel

$46,000 USD
 
Instant Quote Eligible Listing - CLICK HERE!
CONTACT INFO
Name:
Sales Rep

ADDRESS
Global Fleet Solutions
17300 W Valley Hwy
SeattleWashington 98188
ATTRIBUTES
STOCK #:
EQC036658
YEAR:
2021
Manufacturer:
MODEL #:
CAPACITY:
10000
FUEL:
MAST TYPE:
MAST HEIGHT:
172 in
SERIAL #:
AT19E80644
SIDE SHIFTER:
Yes
HOUR METER:
2885
UNIT LOCATION:
POST DATE:
3/2/2026
Reviews
Useful
Not

I've been using the Cat DP50CN1 forklift for a little while now at my job, and I’ve got to say, it really gets the job done. It's reliable and has a smooth ride, perfect for maneuvering through our busy warehouse. The pneumatic tires handle the rough concrete like a champ. One time, it saved the day when we had to move a heavy shipment on short notice, and I felt pretty confident zipping around despite the tight spaces. Overall, this machine has made my work much more efficient, and I can't imagine loading and unloading trucks without it.



Review by Michael Thompson (8/16/2025)

  • General Specifications
    • Model Number: DP50CN1
    • Manufacturer: Caterpillar
    • Type: Forklift
    • Subtype: Pneumatic Tire 4 Wheel Sit Down
  • Dimensions
    • Overall Length: Approximately 137 inches (excluding forks)
    • Overall Width: Approximately 59 inches
    • Height to Overhead Guard: Approximately 88 inches
    • Wheelbase: Approximately 89 inches
    • Ground Clearance: Approximately 6.5 inches at center of wheelbase
  • Performance
    • Load Capacity: 11,000 lbs
    • Load Center: 24 inches
    • Maximum Fork Length: Varies
    • Travel Speed: Approximately 12.4 mph without load
    • Lifting Speed: Approximately 98 feet per minute with load
    • Lowering Speed: Approximately 99 feet per minute with load
  • Engine
    • Engine Model: S6S
    • Fuel Type: Diesel
    • Rated Power: Approximately 81 HP
    • Number of Cylinders: 6
    • Torque: Approximately 244 lb-ft at 1400 RPM
  • Hydraulics
    • Hydraulic System Pressure: Approximately 3,550 psi
  • Tires
    • Tire Type: Pneumatic
    • Front Tire Size: 8.25-15
    • Rear Tire Size: 8.25-15
  • Steering and Braking
    • Steering: Hydraulic Power Steering
    • Brakes: Hydraulic Wet Disc Brakes
  • Operator Comfort
    • Seat: Fully Adjustable
    • Steering Wheel: Tilt Adjustable
  • Additional Features
    • Multi-function Display
    • Safety Overhead Guard
    • Operator Presence System
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.


Call
Get Quote
Equipment Finder Equipment
finder
*All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Please correct the following