Eliftruck
BUY A FORKLIFT SELL A FORKLIFT RENT A FORKLIFT
Overview
Spec Sheet
Shipping/Freight
Equipment Description
#3013 Nice 2002 Hyster S50XM, 5K Cushion tire forklift with good cushion tires, 189” triple stage mast, side shift carriage, good running 4cyl. LP gas engine, automatic transmission, 42” pallet forks, New PM Service, and New paint!! (Photos are of a sister unit, looks similar after paint)
Spec Sheet
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.

  • General Information
    • Model Number: S50XM
    • Manufacturer: Hyster
    • Type: Forklift
  • Dimensions
    • Overall Length: Varies based on fork length
    • Overall Width: Approximately 45 inches
    • Overall Height (to top of overhead guard): Around 85 inches
    • Wheelbase: Approximately 60 inches
    • Ground Clearance: Around 4 inches
  • Engine
    • Engine Type: Internal Combustion Engine
    • Fuel Type: LPG (Liquefied Petroleum Gas)
    • Engine Model: Mazda 2.0L
    • Power Output: Approximately 50 HP
  • Performance
    • Load Capacity: 5,000 lbs
    • Travel Speed (loaded): Approximately 10 mph
    • Lift Speed (loaded): About 98 feet per minute
    • Gradeability (loaded): Approximately 22%
  • Weight
    • Total Weight (unloaded): Approximately 8,300 lbs
  • Tires
    • Tire Type: Cushion
    • Front Tire Size: 21 x 7 x 15 inches
    • Rear Tire Size: 16 x 5 x 10.5 inches
  • Brakes
    • Service Brake: Hydraulic
    • Parking Brake: Mechanical Hand Lever
  • Hydraulic System
    • Hydraulic System Pressure: Approximately 2,500 psi

2002 Hyster S50XM

Buy or Rent

cushion tire 4 wheel sit down (indoor warehouse) lp gas

$11,995 USD

$275 USD per day

$785 USD per week

$1,860 USD per month

 
Instant Quote Eligible Listing - CLICK HERE!
CONTACT INFO
Name:
Aidan MacKenzie
Phone:

ADDRESS
Western Material Handling
1113 N College Ave
Fort CollinsColorado 80524
ATTRIBUTES
STOCK #:
3013
YEAR:
2002
Manufacturer:
MODEL #:
CAPACITY:
5000
FUEL:
MAST TYPE:
MAST HEIGHT:
189 in
SIDE SHIFTER:
Yes
CONDITION:
Used/Rental
UNIT LOCATION:
Colorado [80524]
DESCRIPTION:
3013 NICE HYSTER S50XM 5K CUSH 3STG SS LP
POST DATE:
4/29/2026
Reviews
Useful
Not

The Hyster S50XM forklift has really impressed me with its balance of power and efficiency. Having spent some time operating one at a recent warehouse job, I found it surprisingly nimble for its size. It tackled heavy loads with ease, and I appreciated how easily it transitioned from indoor to outdoor tasks—something I didn’t expect at first. The visibility from the operator's seat is pretty solid, making tight turns feel less stressful. It definitely felt like a reliable workhorse on the floor, and I can see why it’s a go-to for many. Overall, it’s a dependable piece of equipment that gets the job done without fuss.



Review by Kyle Thompson (2/24/2026)

  • General Information
    • Model Number: S50XM
    • Manufacturer: Hyster
    • Type: Forklift
  • Dimensions
    • Overall Length: Varies based on fork length
    • Overall Width: Approximately 45 inches
    • Overall Height (to top of overhead guard): Around 85 inches
    • Wheelbase: Approximately 60 inches
    • Ground Clearance: Around 4 inches
  • Engine
    • Engine Type: Internal Combustion Engine
    • Fuel Type: LPG (Liquefied Petroleum Gas)
    • Engine Model: Mazda 2.0L
    • Power Output: Approximately 50 HP
  • Performance
    • Load Capacity: 5,000 lbs
    • Travel Speed (loaded): Approximately 10 mph
    • Lift Speed (loaded): About 98 feet per minute
    • Gradeability (loaded): Approximately 22%
  • Weight
    • Total Weight (unloaded): Approximately 8,300 lbs
  • Tires
    • Tire Type: Cushion
    • Front Tire Size: 21 x 7 x 15 inches
    • Rear Tire Size: 16 x 5 x 10.5 inches
  • Brakes
    • Service Brake: Hydraulic
    • Parking Brake: Mechanical Hand Lever
  • Hydraulic System
    • Hydraulic System Pressure: Approximately 2,500 psi
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.


Call
Get Quote
Equipment Finder Equipment
finder
*All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Please correct the following