Eliftruck
BUY A FORKLIFT SELL A FORKLIFT RENT A FORKLIFT
Overview
Spec Sheet
Shipping/Freight
Equipment Description
CMP40L 8,000 lb Capacity, 3st 90/177 Mast, Side Shift / Fork Positioner, LP Fuel, 96" Forks, Solid Tires, 4,888 Hours
Spec Sheet
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.

  • General Specifications
    • Manufacturer: Clark
    • Model Number: CMP40L
    • Type: Forklift
    • Subtype: Pneumatic Tire, 4 Wheel Sit Down
  • Dimensions
    • Overall Length: 165 inches
    • Overall Width: 55 inches
    • Overall Height to Top of Overhead Guard: 92 inches
    • Wheelbase: 85 inches
    • Ground Clearance: 4.5 inches
    • Turning Radius: 116 inches
  • Powertrain
    • Engine Type: Diesel
    • Engine Power: 65 horsepower
    • Transmission: Powershift
  • Tire Information
    • Tires: Pneumatic
    • Front Tires: 8.25-15
    • Rear Tires: 8.25-15
  • Performance
    • Lifting Capacity: 8,000 lbs
    • Travel Speed Full Load: 11 mph
    • Lift Speed Full Load: 110 feet per minute
    • Gradeability: 20%
  • Fork Specifications
    • Fork Length: Varies
  • Weight
    • Operating Weight: 14,300 lbs

2006 Clark CMP40L

pneumatic tire 4 wheel sit down lp gas

Call for price
 
CONTACT INFO
Name:
Jeremy or Tage
Phone:
Website:

ADDRESS
New Tec, Inc.
3764 US 75 Ave
Sioux CenterIowa 51250
ATTRIBUTES
STOCK #:
0022064
YEAR:
2006
Manufacturer:
MODEL #:
CAPACITY:
8000
FUEL:
MAST TYPE:
MAST HEIGHT:
90 / 177 in
SERIAL #:
CMP450L-0163-9589KF
SIDE SHIFTER:
Yes
CONDITION:
Used
HOUR METER:
4888
UNIT LOCATION:
Iowa [51250]
DESCRIPTION:
CMP40L 8,000 lb Capacity, 3st 90/177 Mast,
POST DATE:
4/1/2026
Reviews
Useful
Not

The Clark CMP40L forklift is a solid choice for any warehouse or construction site that needs a reliable workhorse. I remember using this model during a summer job, and it really stood out for its balance and stability, especially on uneven ground. Maneuvering around tight spaces wasn’t an issue, and the sit-down design made long shifts a lot more comfortable. It handles heavy loads with ease, which came in handy when we were moving pallets of materials around. Overall, it's a dependable forklift that gets the job done without fuss.



Review by Jake Thompson (9/4/2025)

  • General Specifications
    • Manufacturer: Clark
    • Model Number: CMP40L
    • Type: Forklift
    • Subtype: Pneumatic Tire, 4 Wheel Sit Down
  • Dimensions
    • Overall Length: 165 inches
    • Overall Width: 55 inches
    • Overall Height to Top of Overhead Guard: 92 inches
    • Wheelbase: 85 inches
    • Ground Clearance: 4.5 inches
    • Turning Radius: 116 inches
  • Powertrain
    • Engine Type: Diesel
    • Engine Power: 65 horsepower
    • Transmission: Powershift
  • Tire Information
    • Tires: Pneumatic
    • Front Tires: 8.25-15
    • Rear Tires: 8.25-15
  • Performance
    • Lifting Capacity: 8,000 lbs
    • Travel Speed Full Load: 11 mph
    • Lift Speed Full Load: 110 feet per minute
    • Gradeability: 20%
  • Fork Specifications
    • Fork Length: Varies
  • Weight
    • Operating Weight: 14,300 lbs
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.


Freight & Delivery Estimation

Need this equipment delivered to your job site or facility? Run our free freight calculator to compare carrier transit times and estimated rates tailored to this unit's exact weight and dimensions.

Calculate Rates
Preloads equipment specs & location automatically | Instant estimate • No registration required
Call
Get Quote
Equipment Finder Equipment
finder
*All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Please correct the following