Eliftruck
BUY A FORKLIFT SELL A FORKLIFT RENT A FORKLIFT
Overview
Spec Sheet
Shipping/Freight
Equipment Description
Used 2018 Taylor Forklift Model #: XC250M Basic Capacity: 25,000 lbs Hours: 1280 Fuel: LPG Mast Type: Dual Stage Lowered Height: 123" Lift Height: 120" Ties: Cushion Forks: 60" 4-Way Hydraulics, Side Shifting Fork Positioner Status: Select Warranty: 60 Days Parts & Labor (or 200 Hours), 90 Days Powertrain (or 300 Hours)
Spec Sheet
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.

  • Model Information
    • Model Number: XC250M
    • Manufacturer: Taylor
    • Type: Forklift
    • Fuel Type: LP Gas
  • General Specifications
    • Load Capacity: 25,000 lbs
    • Power Type: Internal Combustion
    • Operator Environment: Seated
    • Tire Type: Pneumatic
  • Engine Specifications
    • Engine Type: Gas-Powered
    • Number of Cylinders: 6
    • Cooling System: Liquid Cooled
    • Fuel Tank Capacity: 40 gallons
  • Dimensions
    • Overall Length (without forks): 261 inches
    • Overall Width: 100 inches
    • Overall Height: 139 inches
    • Wheelbase: 135 inches
  • Performance
    • Travel Speed (loaded): 14 mph
    • Lift Speed (loaded): 88 ft/min
    • Lower Speed (loaded): 98 ft/min
    • Drawbar Pull: 14,000 lbs
  • Weights
    • Unladen Weight: 36,500 lbs
    • Front Axle Load (laden): 52,300 lbs
    • Rear Axle Load (laden): 9,200 lbs
  • Turning Radius
    • Outside Clearance Radius: 184 inches
  • Forks
    • Fork Length: Varies
    • Fork Width: 7 inches
    • Fork Thickness: 3 inches
  • Additional Features
    • Hydraulic System: Load Sensing
    • Steering: Full Power Steering
    • Brakes: Wet Disc Brakes
    • Seat: Ergonomically designed adjustable seat

2018 Taylor XC250M

cushion tire 4 wheel sit down (indoor warehouse) lp gas

$139,500 USD
 
Instant Quote Eligible Listing - CLICK HERE!
CONTACT INFO
Name:
Ashley Hall
Phone:
Website:

ADDRESS
Wolter, Inc.
820 S Post Rd
IndianapolisIndiana 46239
ATTRIBUTES
STOCK #:
327521
YEAR:
2018
Manufacturer:
MODEL #:
CAPACITY:
25000
FUEL:
MAST TYPE:
SERIAL #:
S ME 41444
SIDE SHIFTER:
Yes
CONDITION:
Used
HOUR METER:
1287
UNIT LOCATION:
Illinois [61109]
POST DATE:
6/15/2026
Reviews
Useful
Not

The Taylor XC250M forklift has proven to be a reliable workhorse on the job site. Having used it during a recent warehouse move, I was pleasantly surprised by how nimble it felt, even with heavy loads. The LP gas fuel system seemed efficient and gave it some decent power while keeping emissions in check. It’s not the quietest machine around, but it's manageable and got the job done without fuss. I appreciated how easy it was to operate, especially during tight turns, which makes a huge difference when you're running around stacks of pallets. If you're looking for a sturdy forklift that doesn't shy away from tough tasks, this one could definitely be worth considering.



Review by Jake Thompson (11/3/2025)

  • Model Information
    • Model Number: XC250M
    • Manufacturer: Taylor
    • Type: Forklift
    • Fuel Type: LP Gas
  • General Specifications
    • Load Capacity: 25,000 lbs
    • Power Type: Internal Combustion
    • Operator Environment: Seated
    • Tire Type: Pneumatic
  • Engine Specifications
    • Engine Type: Gas-Powered
    • Number of Cylinders: 6
    • Cooling System: Liquid Cooled
    • Fuel Tank Capacity: 40 gallons
  • Dimensions
    • Overall Length (without forks): 261 inches
    • Overall Width: 100 inches
    • Overall Height: 139 inches
    • Wheelbase: 135 inches
  • Performance
    • Travel Speed (loaded): 14 mph
    • Lift Speed (loaded): 88 ft/min
    • Lower Speed (loaded): 98 ft/min
    • Drawbar Pull: 14,000 lbs
  • Weights
    • Unladen Weight: 36,500 lbs
    • Front Axle Load (laden): 52,300 lbs
    • Rear Axle Load (laden): 9,200 lbs
  • Turning Radius
    • Outside Clearance Radius: 184 inches
  • Forks
    • Fork Length: Varies
    • Fork Width: 7 inches
    • Fork Thickness: 3 inches
  • Additional Features
    • Hydraulic System: Load Sensing
    • Steering: Full Power Steering
    • Brakes: Wet Disc Brakes
    • Seat: Ergonomically designed adjustable seat
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.


Freight & Delivery Estimation

Need this equipment delivered to your job site or facility? Run our free freight calculator to compare carrier transit times and estimated rates tailored to this unit's exact weight and dimensions.

Calculate Rates
Preloads equipment specs & location automatically | Instant estimate • No registration required
Call
Get Quote
Equipment Finder Equipment
finder
*All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Please correct the following