Overview
Spec Sheet
Shipping/Freight
Equipment Description
Unit comes in Fully Refurbished condition! A 120-Day FULL Warranty on Parts and Labor AND 1-Year Warranty* on Battery included! *Proof of Maintenance required
Spec Sheet
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.

  • General Information
    • Model Number: B40/48IC180D
    • Manufacturer: Bendi
    • Type: Forklift
    • Subtype: Multi Directional IC & Electric Sideloading
    • Fuel Type: LP Gas
  • Dimensions
    • Overall Length: Approximately 148 inches
    • Overall Width: Approximately 51 inches
    • Overall Height (No Load): Approximately 92 inches
    • Wheelbase: Approximately 70 inches
    • Ground Clearance: Approximately 4 inches
  • Weight
    • Unladen Weight: Approximately 9,700 lbs
  • Capacity
    • Load Capacity: Up to 9,500 lbs
    • Load Center: 24 inches
  • Performance
    • Travel Speed (Unladen/Laden): Up to 10 mph
    • Lift Speed (Unladen/Laden): Up to 74 feet per minute
    • Gradeability (Unladen/Laden): Up to 17%
  • Forks
    • Fork Length: Varies
    • Fork Width: 4 inches
    • Fork Thickness: 1.5 inches
  • Engine
    • Engine Type: Internal Combustion
    • Fuel Type: LP Gas
  • Tires
    • Tire Type: Cushion
    • Wheel Configuration: 4-wheel

2015 Bendi B40/48IC-180D

articulated 4 wheel sitdown - gas/electric

$19,950 USD
 
Instant Quote Eligible Listing - CLICK HERE!
CONTACT INFO
Name:
Jeff Croft
Phone:

ADDRESS
Refurbished Lifts
675 S Lincoln Av
San BernardinoCalifornia 92408
ATTRIBUTES
STOCK #:
(RL #121515 Ai)
YEAR:
2015
Manufacturer:
MODEL #:
CAPACITY:
4000
FUEL:
MAST TYPE:
MAST HEIGHT:
258 in
SERIAL #:
B40/48T4-1504B-08925
CONDITION:
Used
HOUR METER:
8650
UNIT LOCATION:
California [92222]
POST DATE:
3/21/2026
Reviews
Useful
Not

The Bendi B40/48IC180D is quite the impressive piece of equipment if you’re into sideloading forklifts. I recently worked with this unit during a warehouse job, and I was surprised at how smoothly it handled tight corners—definitely made navigating through aisles filled with pallets a lot easier than I expected. It runs on LP gas, which seemed to give it a good punch without sacrificing running time. Between its multi-directional capabilities and reliable performance, it truly felt like a solid partner during those busy shifts. For what it’s built to do, I’d say it’s a winner.



Review by Jake Thompson (9/17/2025)

  • General Information
    • Model Number: B40/48IC180D
    • Manufacturer: Bendi
    • Type: Forklift
    • Subtype: Multi Directional IC & Electric Sideloading
    • Fuel Type: LP Gas
  • Dimensions
    • Overall Length: Approximately 148 inches
    • Overall Width: Approximately 51 inches
    • Overall Height (No Load): Approximately 92 inches
    • Wheelbase: Approximately 70 inches
    • Ground Clearance: Approximately 4 inches
  • Weight
    • Unladen Weight: Approximately 9,700 lbs
  • Capacity
    • Load Capacity: Up to 9,500 lbs
    • Load Center: 24 inches
  • Performance
    • Travel Speed (Unladen/Laden): Up to 10 mph
    • Lift Speed (Unladen/Laden): Up to 74 feet per minute
    • Gradeability (Unladen/Laden): Up to 17%
  • Forks
    • Fork Length: Varies
    • Fork Width: 4 inches
    • Fork Thickness: 1.5 inches
  • Engine
    • Engine Type: Internal Combustion
    • Fuel Type: LP Gas
  • Tires
    • Tire Type: Cushion
    • Wheel Configuration: 4-wheel
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.


Call
Get Quote
Equipment Finder Equipment
finder
*All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Please correct the following