Overview
Spec Sheet
Shipping/Freight
Spec Sheet
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.

  • General Information
    • Model Number: H50CT
    • Manufacturer: Hyster
    • Type: Forklift
    • Fuel Type: LP Gas
  • Dimensions
    • Overall Width: Approximately 42 inches
    • Overall Length (without forks): Approximately 90 inches
    • Height to Top of Overhead Guard: Approximately 83 inches
    • Wheelbase: Approximately 55 inches
    • Ground Clearance: Approximately 4 inches
  • Weight
    • Operating Weight: Approximately 8,300 lbs
    • Axle Loading, Drive: Varies
    • Axle Loading, Steering: Varies
  • Performance
    • Load Capacity: 5,000 lbs
    • Travel Speed: Approximately 11 mph
    • Lift Speed (Loaded): Approximately 120 feet per minute
    • Gradeability: Varies depending on load
    • Turning Radius: Approximately 90 inches
  • Engine
    • Engine Type: Internal Combustion
    • Fuel Type: LP Gas
    • Cylinders: 4
    • Power: Approximately 51 HP
  • Transmission
    • Transmission Type: Powershift
    • Number of Speeds: 1 Forward / 1 Reverse
  • Hydraulic System
    • Hydraulic System Type: Open Center
    • Pump Capacity: Approximately 14 gallons per minute
    • Relief Valve Pressure: Approximately 2,250 psi
  • Brakes
    • Service Brake: Hydraulic
    • Parking Brake: Mechanical Hand Lever
  • Tires
    • Tire Type: Pneumatic
    • Front Tire Size: Varies
    • Rear Tire Size: Varies

2015 Hyster H50CT

Buy or Rent

pneumatic tire 4 wheel sit down lp gas

$14,000 USD

$240 USD per day

$642 USD per week

$1,650 USD per month

 
Instant Quote Eligible Listing - CLICK HERE!
CONTACT INFO
Name:
Don Carlson
Phone:

ADDRESS
Gunnar Forklift Sales
4636 S 36th St.
Phoenix Arizona 85040
ATTRIBUTES
YEAR:
2015
Manufacturer:
MODEL #:
CAPACITY:
5000
FUEL:
MAST TYPE:
MAST HEIGHT:
187 in
SERIAL #:
B274V016921
SIDE SHIFTER:
Yes
CONDITION:
Used/Rental
HOUR METER:
4300
UNIT LOCATION:
Arizona [85007]
POST DATE:
4/23/2026
Reviews
Useful
Not

The Hyster H50CT forklift has been a reliable workhorse during my time in the warehouse. Its LP gas fuel system offers a nice balance of power and efficiency, which really shines through when hauling heavy loads around the tight aisles. I've seen it breeze through daily tasks, whether it’s moving pallets or stacking products with ease. I remember one particularly busy day when we had a freight delivery timed to coincide with a huge sale, and this unit really stepped up. It made those frantic hours a whole lot smoother. Overall, it's been a solid addition to our fleet, standing up to the grind without a hitch.



Review by Mike Thompson (9/23/2025)

  • General Information
    • Model Number: H50CT
    • Manufacturer: Hyster
    • Type: Forklift
    • Fuel Type: LP Gas
  • Dimensions
    • Overall Width: Approximately 42 inches
    • Overall Length (without forks): Approximately 90 inches
    • Height to Top of Overhead Guard: Approximately 83 inches
    • Wheelbase: Approximately 55 inches
    • Ground Clearance: Approximately 4 inches
  • Weight
    • Operating Weight: Approximately 8,300 lbs
    • Axle Loading, Drive: Varies
    • Axle Loading, Steering: Varies
  • Performance
    • Load Capacity: 5,000 lbs
    • Travel Speed: Approximately 11 mph
    • Lift Speed (Loaded): Approximately 120 feet per minute
    • Gradeability: Varies depending on load
    • Turning Radius: Approximately 90 inches
  • Engine
    • Engine Type: Internal Combustion
    • Fuel Type: LP Gas
    • Cylinders: 4
    • Power: Approximately 51 HP
  • Transmission
    • Transmission Type: Powershift
    • Number of Speeds: 1 Forward / 1 Reverse
  • Hydraulic System
    • Hydraulic System Type: Open Center
    • Pump Capacity: Approximately 14 gallons per minute
    • Relief Valve Pressure: Approximately 2,250 psi
  • Brakes
    • Service Brake: Hydraulic
    • Parking Brake: Mechanical Hand Lever
  • Tires
    • Tire Type: Pneumatic
    • Front Tire Size: Varies
    • Rear Tire Size: Varies
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.


Call
Get Quote
Equipment Finder Equipment
finder
Please correct the following