Overview
Spec Sheet
Shipping/Freight
Equipment Description
Positioned Short Arm - 10" to 60" Roll Range - Good Blocks - Good Condition
Spec Sheet
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.

  • General Specifications
    • Model Number: 42H-RCP
    • Manufacturer: Cascade
    • Type: Forklift
  • Dimensions
    • Overall Width: Approximately 80 inches
    • Overall Length (including forks): Varies
    • Overall Height: Approximately 95 inches
    • Wheelbase: Approximately 70 inches
    • Ground Clearance: About 6 inches
  • Performance
    • Lifting Capacity: Approximately 9,000 pounds
    • Travel Speed (laden/unladen): Up to 12 mph
    • Gradeability (laden): 20%
  • Powertrain
    • Engine Type: Diesel
    • Engine Power: Approx. 74 HP
    • Transmission: Automatic
  • Tires
    • Type: Pneumatic
    • Front/Rear Tires Size: Front 8.25 x 15, Rear 7.00 x 12
  • Hydraulic System
    • Pressure: Up to 3,500 psi
    • Flow Rate: Approximately 15 gallons per minute
  • Fuel System
    • Fuel Type: Diesel
    • Fuel Tank Capacity: Approximately 25 gallons

Cascade 42H-RCP

paper roll clamps

$11,500 USD
 
Instant Quote Eligible Listing - CLICK HERE!
CONTACT INFO
Name:
Seth Caldwell
Phone:

ADDRESS
Ace Attachments
622 Industrial Way
Chester South Carolina 29706
ATTRIBUTES
STOCK #:
A-0474
Manufacturer:
MODEL #:
CAPACITY:
9260
CLASS:
IV
SUBCATEGORY:
CONDITION:
Used
UNIT LOCATION:
POST DATE:
2/18/2026
  • General Specifications
    • Model Number: 42H-RCP
    • Manufacturer: Cascade
    • Type: Forklift
  • Dimensions
    • Overall Width: Approximately 80 inches
    • Overall Length (including forks): Varies
    • Overall Height: Approximately 95 inches
    • Wheelbase: Approximately 70 inches
    • Ground Clearance: About 6 inches
  • Performance
    • Lifting Capacity: Approximately 9,000 pounds
    • Travel Speed (laden/unladen): Up to 12 mph
    • Gradeability (laden): 20%
  • Powertrain
    • Engine Type: Diesel
    • Engine Power: Approx. 74 HP
    • Transmission: Automatic
  • Tires
    • Type: Pneumatic
    • Front/Rear Tires Size: Front 8.25 x 15, Rear 7.00 x 12
  • Hydraulic System
    • Pressure: Up to 3,500 psi
    • Flow Rate: Approximately 15 gallons per minute
  • Fuel System
    • Fuel Type: Diesel
    • Fuel Tank Capacity: Approximately 25 gallons
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.


Call
Get Quote
Equipment Finder Equipment
finder
*All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Please correct the following