Overview
Spec Sheet
Shipping/Freight
Equipment Description
Used Cascade Sideshift with Load Backrest Class II. Width of sideshift is 31.75 inches
Spec Sheet
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.

  • General Information
    • Model Number: 55F-SSS-A011-W-06070-R6
    • Manufacturer: Cascade
    • Type: Attachment
    • Subtype: Sideshifter
  • Specifications
    • Capacity: Approx. 6000 lbs
    • Frame Width: Approximately 55 inches
    • Sideshift Stroke: Approx. 8 inches each way
    • Carriage Class: Class III
    • Fork Length: Varies
    • Weight: Approx. 700 lbs
  • Hydraulics
    • Hydraulic Pressure: Range 2000 to 3000 psi
    • Flow Rate: Approx. 10 GPM
  • Operating Conditions
    • Temperature Range: -4°F to 122°F
    • Working Environment: Indoor and Outdoor
  • Performance
    • Speed Loss When Loaded: Minimal
    • Maneuverability: Enhanced due to Sideshifting Capability
  • Maintenance
    • Maintenance Intervals: Approx. every 250 hours of operation
    • Grease Points: Regular lubrication required

2016 Cascade 55F-SSS-A011-W-06070-R6

sideshifter

Call for price
 
CONTACT INFO
Name:
Rod Kleiber
Phone:

ADDRESS
Forklift Management Specialists, LLC
5511 Stewart Ave
WausauWisconsin 54401
ATTRIBUTES
STOCK #:
Used Cascade Sideshift with Load Backrest Class II
YEAR:
2016
Manufacturer:
CLASS:
II
SUBCATEGORY:
CONDITION:
Used
UNIT LOCATION:
Wisconsin [54401]
DESCRIPTION:
Used Cascade Sideshift with LBR Class II
POST DATE:
3/30/2026
  • General Information
    • Model Number: 55F-SSS-A011-W-06070-R6
    • Manufacturer: Cascade
    • Type: Attachment
    • Subtype: Sideshifter
  • Specifications
    • Capacity: Approx. 6000 lbs
    • Frame Width: Approximately 55 inches
    • Sideshift Stroke: Approx. 8 inches each way
    • Carriage Class: Class III
    • Fork Length: Varies
    • Weight: Approx. 700 lbs
  • Hydraulics
    • Hydraulic Pressure: Range 2000 to 3000 psi
    • Flow Rate: Approx. 10 GPM
  • Operating Conditions
    • Temperature Range: -4°F to 122°F
    • Working Environment: Indoor and Outdoor
  • Performance
    • Speed Loss When Loaded: Minimal
    • Maneuverability: Enhanced due to Sideshifting Capability
  • Maintenance
    • Maintenance Intervals: Approx. every 250 hours of operation
    • Grease Points: Regular lubrication required
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.


Call
Get Quote
Equipment Finder Equipment
finder
Please correct the following