Eliftruck
BUY A FORKLIFT SELL A FORKLIFT RENT A FORKLIFT
Overview
Spec Sheet
Shipping/Freight
Spec Sheet
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.

  • General Specifications
    • Model Number: C18
    • Manufacturer: Clark
    • Type: Forklift
    • Subtype: Pneumatic Tire 4 Wheel Sit Down
    • Fuel Type: LP Gas
  • Engine
    • Engine Type: Internal Combustion
    • Horsepower: Approximately 60-80 HP
    • Cylinder Count: 4
  • Dimensions
    • Overall Length: Approximately 9-10 feet
    • Overall Width: Approximately 4-5 feet
    • Height to Top of Overhead Guard: Approximately 7-8 feet
    • Wheelbase: Approximately 5-6 feet
    • Ground Clearance: Approximately 4-6 inches
  • Weight
    • Unloaded Weight: Approximately 8,000-10,000 lbs
  • Performance
    • Rated Capacity: Typically ranges from 3,500 to 4,000 lbs
    • Travel Speed: Approximately 10-12 mph (unladen)
    • Gradeability: Approximately 15-20% (laden)
  • Tires
    • Tire Type: Pneumatic
    • Tire Size (Front): Varies based on specific configuration
    • Tire Size (Rear): Varies based on specific configuration
  • Forks
    • Fork Length: Varies
    • Fork Width: Typically around 4 inches
    • Fork Thickness: Typically around 1.5 inches
  • Transmission
    • Transmission Type: Powershift
    • Number of Speeds: Typically 1 forward, 1 reverse
  • Operator Environment
    • Seat Type: Adjustable with suspension
    • Steering: Hydraulic power steering
    • Instrumentation: Comprehensive gauge cluster

2023 Clark C18

New

pneumatic tire 4 wheel sit down lp gas

$27,500 USD
 
Instant Quote Eligible Listing - CLICK HERE!
CONTACT INFO
Name:
Sales Dept.

ADDRESS
Burwell Material Handling
107 Commercial Ln
DothanAlabama 36303
ATTRIBUTES
STOCK #:
EQ0001314
YEAR:
2023
Manufacturer:
MODEL #:
CAPACITY:
3500
FUEL:
MAST TYPE:
MAST HEIGHT:
188 in
SERIAL #:
P152L-0117-12041VN
SIDE SHIFTER:
Yes
CONDITION:
New
HOUR METER:
2
UNIT LOCATION:
Alabama [36303]
DESCRIPTION:
42" forks
POST DATE:
2/17/2026
Reviews
Useful
Not

The Clark C18 forklift has been a reliable companion on the warehouse floor, especially during those hectic shipping days. I remember the first time I hopped on one of these bad boys; I was a bit nervous, but the control was surprisingly smooth, making my job much easier. The LP gas engine fires up quickly, and the power it delivers definitely keeps up, even when navigating tight spaces. I'm also a fan of the pneumatic tires—they handle uneven outdoor surfaces like a champ. Overall, it's a solid machine that gets the job done without fuss.



Review by Jake Thompson (12/5/2025)

  • General Specifications
    • Model Number: C18
    • Manufacturer: Clark
    • Type: Forklift
    • Subtype: Pneumatic Tire 4 Wheel Sit Down
    • Fuel Type: LP Gas
  • Engine
    • Engine Type: Internal Combustion
    • Horsepower: Approximately 60-80 HP
    • Cylinder Count: 4
  • Dimensions
    • Overall Length: Approximately 9-10 feet
    • Overall Width: Approximately 4-5 feet
    • Height to Top of Overhead Guard: Approximately 7-8 feet
    • Wheelbase: Approximately 5-6 feet
    • Ground Clearance: Approximately 4-6 inches
  • Weight
    • Unloaded Weight: Approximately 8,000-10,000 lbs
  • Performance
    • Rated Capacity: Typically ranges from 3,500 to 4,000 lbs
    • Travel Speed: Approximately 10-12 mph (unladen)
    • Gradeability: Approximately 15-20% (laden)
  • Tires
    • Tire Type: Pneumatic
    • Tire Size (Front): Varies based on specific configuration
    • Tire Size (Rear): Varies based on specific configuration
  • Forks
    • Fork Length: Varies
    • Fork Width: Typically around 4 inches
    • Fork Thickness: Typically around 1.5 inches
  • Transmission
    • Transmission Type: Powershift
    • Number of Speeds: Typically 1 forward, 1 reverse
  • Operator Environment
    • Seat Type: Adjustable with suspension
    • Steering: Hydraulic power steering
    • Instrumentation: Comprehensive gauge cluster
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.


Call
Get Quote
Equipment Finder Equipment
finder
*All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Please correct the following