Overview
Spec Sheet
Shipping/Freight
Equipment Description
2013 Taylor TX-300S, 2013 Taylor TX300S 240" mast lift height96" forks with side shift and fork positionerNewly refurbished
Spec Sheet
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.

  • General Specifications:
    • Model Number: TX300S
    • Manufacturer: Taylor
    • Type: Forklift
    • Subtype: Pneumatic Tire 4 Wheel Sit Down
    • Fuel Type: Diesel
  • Dimensions:
    • Overall Length (without forks): Approximately 14.6 feet
    • Overall Width: Approximately 8.4 feet
    • Overall Height (cab): Approximately 11.4 feet
    • Wheelbase: Approximately 9.3 feet
    • Ground Clearance: Approximately 11 inches
  • Performance:
    • Load Capacity: Approximately 30,000 lbs
    • Travel Speed: Up to 18.6 mph
    • Turning Radius: Approximately 14.6 feet
  • Engine:
    • Engine Type: Diesel
    • Horsepower: Approximately 230 HP
    • Displacement: Approximately 403 cubic inches
  • Tires:
    • Tire Type: Pneumatic
    • Front Tires: 12.00 x 24
    • Rear Tires: 12.00 x 24
  • Hydraulics:
    • Hydraulic System Pressure: Approximately 2500 psi
    • Hydraulic Tank Capacity: Approximately 50 gallons
  • Operators Environment:
    • Seat: Adjustable, Suspension Seat
    • Controls: Ergonomic Layout
    • Visibility: Enhanced Visibility Design
  • Weight:
    • Operating Weight: Approximately 45,000 lbs

2013 Taylor TX-300S

pneumatic tire 4 wheel sit down

$125,000 USD
 
Instant Quote Eligible Listing - CLICK HERE!
CONTACT INFO
Name:
Barkley Lindsey
Phone:

ADDRESS
Large Lift Rentals
7942 Rand St
HoustonTexas 77028
ATTRIBUTES
STOCK #:
UE5042
YEAR:
2013
Manufacturer:
MODEL #:
MAST TYPE:
Two Stage
MAST HEIGHT:
300 in
SERIAL #:
S CD 38607
SIDE SHIFTER:
Yes
CONDITION:
Used
HOUR METER:
6500
UNIT LOCATION:
Texas [77028]
POST DATE:
1/7/2026
Reviews
Useful
Not

The Taylor TX300S forklift is a solid workhorse that really makes a difference on the job site. I remember using one during a particularly busy period at the warehouse, and it handled the heavy loads like a champ without breaking a sweat. The diesel engine provides serious power, which is great when you need to get things moving quickly. It’s surprisingly easy to maneuver for a four-wheel sit-down model, even in tight spaces. Having the pneumatic tires adds a level of stability that’s essential when navigating uneven ground. Overall, it's a reliable piece of equipment that gets the job done without a lot of fuss.



Review by Jack Thompson (8/17/2025)

  • General Specifications:
    • Model Number: TX300S
    • Manufacturer: Taylor
    • Type: Forklift
    • Subtype: Pneumatic Tire 4 Wheel Sit Down
    • Fuel Type: Diesel
  • Dimensions:
    • Overall Length (without forks): Approximately 14.6 feet
    • Overall Width: Approximately 8.4 feet
    • Overall Height (cab): Approximately 11.4 feet
    • Wheelbase: Approximately 9.3 feet
    • Ground Clearance: Approximately 11 inches
  • Performance:
    • Load Capacity: Approximately 30,000 lbs
    • Travel Speed: Up to 18.6 mph
    • Turning Radius: Approximately 14.6 feet
  • Engine:
    • Engine Type: Diesel
    • Horsepower: Approximately 230 HP
    • Displacement: Approximately 403 cubic inches
  • Tires:
    • Tire Type: Pneumatic
    • Front Tires: 12.00 x 24
    • Rear Tires: 12.00 x 24
  • Hydraulics:
    • Hydraulic System Pressure: Approximately 2500 psi
    • Hydraulic Tank Capacity: Approximately 50 gallons
  • Operators Environment:
    • Seat: Adjustable, Suspension Seat
    • Controls: Ergonomic Layout
    • Visibility: Enhanced Visibility Design
  • Weight:
    • Operating Weight: Approximately 45,000 lbs
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.


Call
Get Quote
Equipment Finder Equipment
finder
*All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Please correct the following