Eliftruck
BUY A FORKLIFT SELL A FORKLIFT RENT A FORKLIFT
Overview
Spec Sheet
Shipping/Freight
Equipment Description
● CAPACITY: 3,500 LBS ● TIRES: CUSHION ● HOURS: 6,292 ● FUEL: LPG (tank not included) ● ATTACHMENTS: SIDE SHIFT ● MAST TYPE: 3 STAGE (187” LIFT) ● FORKS INCLUDED FINANCE AS LOW AS $357/MO (WAC) $17,489 W/WARRANTY*! $11,892 (Estimated) After Section 179 Tax Savings!
Spec Sheet
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.

  • Model Information
    • Model Number: MCPL01A18 LV
    • Manufacturer: Nissan
    • Type: Forklift
    • Subtype: Cushion Tire 4 Wheel Sit Down (Indoor Warehouse)
    • Fuel Type: LP Gas
  • Dimensions
    • Overall Width: Approximately 42.1 inches
    • Overall Length (without forks): Approximately 83 inches
    • Overall Height (cab): Varies based on configuration
    • Wheelbase: Approximately 55 inches
    • Minimum Outside Turning Radius: Approximately 69 inches
  • Performance
    • Load Capacity: 3,500-4,000 lbs
    • Travel Speed: Approximately 10.6 mph laden
    • Lift Speed: Approximately 100 ft/min
    • Gradeability: 21% laden
    • Drawbar Pull: Approximately 3,360 lbs
  • Powertrain
    • Engine Type: Internal Combustion
    • Engine Model: K21
    • Engine Power: Approximately 50 hp
    • Transmission Type: Powershift
    • Number of Speeds: 1 forward, 1 reverse
  • Chassis
    • Tire Type: Cushion
    • Tire Size (Front): 18x7-8
    • Tire Size (Rear): 16x6-8
    • Steering: Hydrostatic power steering
  • Comfort and Safety
    • Operator Seating: Ergonomic design with adjustable seating
    • Brakes: Hydraulic drum brakes
    • Safety Features: Seatbelt, overhead guard, backup alarm

2008 Nissan MCPL01A18LV

cushion tire 4 wheel sit down (indoor warehouse) lp gas

Call for price
 
CONTACT INFO
Name:
Jason Frye
Phone:

ADDRESS
Forklift Select LLC.
12875 E. 42nd. Ave, Suite 40
DenverColorado 80239
ATTRIBUTES
STOCK #:
08 NIS 3.5K3L6K17
YEAR:
2008
Manufacturer:
MODEL #:
CAPACITY:
3500
FUEL:
MAST TYPE:
MAST HEIGHT:
187 in
SERIAL #:
CPL01-9N0971
SIDE SHIFTER:
Yes
CONDITION:
Used
HOUR METER:
6292
UNIT LOCATION:
Colorado [80239]
DESCRIPTION:
ONLY 6292 HOURS 3.5K 3STG 187" SS LPG
POST DATE:
6/8/2026
Reviews
Useful
Not

The Nissan MCPL01A18 LV is quite a handy little forklift for indoor warehouse use. I remember using one during a summer job a few years back, and it really made moving heavy pallets around much easier than I anticipated. The cushion tires provide a nice smooth ride, and since it runs on LP gas, it always had that reliable punch without the annoying fumes of some other fuel types. It felt pretty stable even when loaded, which gave me a lot of confidence as I maneuvered through tight spaces. Overall, it’s a solid unit that gets the job done without any fuss.



Review by Jake Thompson (6/3/2025)

  • Model Information
    • Model Number: MCPL01A18 LV
    • Manufacturer: Nissan
    • Type: Forklift
    • Subtype: Cushion Tire 4 Wheel Sit Down (Indoor Warehouse)
    • Fuel Type: LP Gas
  • Dimensions
    • Overall Width: Approximately 42.1 inches
    • Overall Length (without forks): Approximately 83 inches
    • Overall Height (cab): Varies based on configuration
    • Wheelbase: Approximately 55 inches
    • Minimum Outside Turning Radius: Approximately 69 inches
  • Performance
    • Load Capacity: 3,500-4,000 lbs
    • Travel Speed: Approximately 10.6 mph laden
    • Lift Speed: Approximately 100 ft/min
    • Gradeability: 21% laden
    • Drawbar Pull: Approximately 3,360 lbs
  • Powertrain
    • Engine Type: Internal Combustion
    • Engine Model: K21
    • Engine Power: Approximately 50 hp
    • Transmission Type: Powershift
    • Number of Speeds: 1 forward, 1 reverse
  • Chassis
    • Tire Type: Cushion
    • Tire Size (Front): 18x7-8
    • Tire Size (Rear): 16x6-8
    • Steering: Hydrostatic power steering
  • Comfort and Safety
    • Operator Seating: Ergonomic design with adjustable seating
    • Brakes: Hydraulic drum brakes
    • Safety Features: Seatbelt, overhead guard, backup alarm
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.


Call
Get Quote
Equipment Finder Equipment
finder
*All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Please correct the following