Eliftruck
BUY A FORKLIFT SELL A FORKLIFT RENT A FORKLIFT
Overview
Spec Sheet
Shipping/Freight
Equipment Description
#2456w Good running Hyster H90XLS 9K, Pneumatic tire forklift with excellent air pneumatic tires, 170" 2-stage mast, 60” wide carriage with side-shift, 42" pallet forks, good running Diesel engine, mono-trol pedal automatic transmission, recent paint job and New PM service!
Spec Sheet
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.

  • General Information
    • Model: H90XLS
    • Manufacturer: Hyster
    • Type: LPG (Liquid Petroleum Gas) Forklift
  • Dimensions
    • Overall Length: 15 ft
    • Overall Width: 4.5 ft
    • Overall Height: 7.9 ft
    • Ground Clearance: 8.3 inches
  • Capacity
    • Load Capacity: 9,000 lbs
    • Load Center: 24 inches
  • Powertrain
    • Engine Manufacturer: GM
    • Engine Model: 4.3L V6
    • Fuel Type: LPG
    • Transmission Type: Powershift
    • Number of Speeds: 1 forward, 1 reverse
  • Performance
    • Travel Speed: Up to 12 mph
    • Lift Speed: 78 ft/min
    • Lowering Speed: 95 ft/min
  • Weight
    • Service Weight: 13,700 lbs
  • Forks
    • Fork Length: Varies
    • Fork Width: 6 inches
    • Fork Thickness: 2 inches
  • Tires
    • Tire Type: Pneumatic
    • Tire Size Front: 8.25-15
    • Tire Size Rear: 8.25-15

1993 Hyster H90XLS

pneumatic tire 4 wheel sit down diesel

$16,995 USD
 
Instant Quote Eligible Listing - CLICK HERE!
CONTACT INFO
Name:
Josh MacKenzie
Phone:

ADDRESS
Western Material Handling
507 W. Valley Rd
TorringtonWyoming 82240
ATTRIBUTES
STOCK #:
2456w
YEAR:
1993
Manufacturer:
MODEL #:
CAPACITY:
9000
FUEL:
MAST TYPE:
MAST HEIGHT:
169 in
SERIAL #:
G005D023454P
SIDE SHIFTER:
Yes
CONDITION:
Used
HOUR METER:
529
UNIT LOCATION:
Wyoming [82240]
DESCRIPTION:
2456w 1993 HYSTER H90XLS 9K PNEU 2STG SS DIESEL
POST DATE:
4/29/2026
Reviews
Useful
Not

The H90XLS from Hyster is a solid piece of machinery that definitely makes handling heavy loads a lot easier. I remember the first time I hopped on one during a busy warehouse shift—what a game changer! It glided smoothly, even when we were stuffed to the brim with pallets. The steering felt natural, and the visibility was a lifesaver when navigating tight spaces. It's been reliable, too; no wild breakdowns to slow us down. Overall, it's been a dependable workhorse that I'd recommend to anyone needing to boost productivity without sacrificing control.



Review by Jake Thompson (2/6/2026)

  • General Information
    • Model: H90XLS
    • Manufacturer: Hyster
    • Type: LPG (Liquid Petroleum Gas) Forklift
  • Dimensions
    • Overall Length: 15 ft
    • Overall Width: 4.5 ft
    • Overall Height: 7.9 ft
    • Ground Clearance: 8.3 inches
  • Capacity
    • Load Capacity: 9,000 lbs
    • Load Center: 24 inches
  • Powertrain
    • Engine Manufacturer: GM
    • Engine Model: 4.3L V6
    • Fuel Type: LPG
    • Transmission Type: Powershift
    • Number of Speeds: 1 forward, 1 reverse
  • Performance
    • Travel Speed: Up to 12 mph
    • Lift Speed: 78 ft/min
    • Lowering Speed: 95 ft/min
  • Weight
    • Service Weight: 13,700 lbs
  • Forks
    • Fork Length: Varies
    • Fork Width: 6 inches
    • Fork Thickness: 2 inches
  • Tires
    • Tire Type: Pneumatic
    • Tire Size Front: 8.25-15
    • Tire Size Rear: 8.25-15
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.


Call
Get Quote
Equipment Finder Equipment
finder
*All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Please correct the following