Overview
Spec Sheet
Videos
Shipping/Freight
Equipment Description
#D21577d Cool Hyster H80C 8K Pneumatic tire forklift with approx. 150" two stage mast, air pneumatic tires, 6cyl. flathead gasoline engine, manual transmission, 42" pallet forks, New PM service and New paint job! (Photo is of a sister unit, looks similar after paint)
Spec Sheet
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.

  • General Information
    • Model Number: H80C
    • Manufacturer: Hyster
    • Type: Forklift
    • Subtype: Pneumatic Tire 4 Wheel Sit Down
    • Fuel Type: LP Gas
  • Dimensions
    • Overall Length: Approx. 153 inches
    • Overall Width: Approx. 55 inches
    • Height to Top of Overhead Guard: Approx. 83 inches
    • Wheelbase: Approx. 74 inches
    • Ground Clearance: Approx. 6 inches
  • Capacity
    • Lifting Capacity: 8,000 lbs
    • Fuel Tank Capacity: Approx. 33 lbs (propane)
  • Engine
    • Engine Type: Internal Combustion
    • Engine Model: Typically found in Hyster models (specific engine model varies)
    • Fuel System: LPG
  • Performance
    • Travel Speed: Varies
    • Lift Speed: Varies
    • Gradeability: Varies based on load
  • Tires
    • Tire Type: Pneumatic
    • Front Tires: Typically dual, size varies
    • Rear Tires: Typically single, size varies
  • Hydraulic System
    • Hydraulic Pressure: Varies based on configuration
  • Additional Features
    • Operator's Seat: Standard with seat belt
    • Steering: Power steering
    • Brakes: Hydraulic/multiple wet disk brakes

Hyster H80C

pneumatic tire 4 wheel sit down gasoline

$7,995 USD
 
Instant Quote Eligible Listing - CLICK HERE!
CONTACT INFO
Name:
Dennis Firkins
Phone:

ADDRESS
Western Material Handling
5678 Eudora St
Commerce CityColorado 80022
ATTRIBUTES
STOCK #:
D21577d
Manufacturer:
MODEL #:
CAPACITY:
8000
FUEL:
MAST TYPE:
MAST HEIGHT:
150 in
SERIAL #:
5D23547E
SIDE SHIFTER:
No
CONDITION:
Used
HOUR METER:
2200
UNIT LOCATION:
Colorado [80022]
DESCRIPTION:
D21577d HYSTER H80C 8K PNEU 2STG GASOLINE MANUAL TRANS
POST DATE:
4/29/2026
Reviews
Useful
Not

The Hyster H80C forklift has been a solid addition to our warehouse operations over the past few months. It’s impressive how smoothly it handles heavy loads, even when we’re packed to the brim before shipping. I remember the first time I hopped on one of these to move a pallet of goods—it felt like I was gliding through the aisles. The LP gas engine delivers decent power while keeping noise levels lower than I expected, which is a plus during long shifts. It’s definitely a dependable workhorse on the floor, but I did find that the visibility isn't always the best when you're trying to navigate tight spaces. Overall, it gets the job done, and I can't complain about the performance.



Review by Jake Thompson (7/18/2025)

  • General Information
    • Model Number: H80C
    • Manufacturer: Hyster
    • Type: Forklift
    • Subtype: Pneumatic Tire 4 Wheel Sit Down
    • Fuel Type: LP Gas
  • Dimensions
    • Overall Length: Approx. 153 inches
    • Overall Width: Approx. 55 inches
    • Height to Top of Overhead Guard: Approx. 83 inches
    • Wheelbase: Approx. 74 inches
    • Ground Clearance: Approx. 6 inches
  • Capacity
    • Lifting Capacity: 8,000 lbs
    • Fuel Tank Capacity: Approx. 33 lbs (propane)
  • Engine
    • Engine Type: Internal Combustion
    • Engine Model: Typically found in Hyster models (specific engine model varies)
    • Fuel System: LPG
  • Performance
    • Travel Speed: Varies
    • Lift Speed: Varies
    • Gradeability: Varies based on load
  • Tires
    • Tire Type: Pneumatic
    • Front Tires: Typically dual, size varies
    • Rear Tires: Typically single, size varies
  • Hydraulic System
    • Hydraulic Pressure: Varies based on configuration
  • Additional Features
    • Operator's Seat: Standard with seat belt
    • Steering: Power steering
    • Brakes: Hydraulic/multiple wet disk brakes
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.


Call
Get Quote
Equipment Finder Equipment
finder
*All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Please correct the following