Overview
Spec Sheet
Shipping/Freight
Spec Sheet
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.

  • General Information
    • Model Number: 40D-9
    • Manufacturer: Hyundai
    • Type: Forklift
    • Subtype: Pneumatic Tire 4 Wheel Sit Down
    • Fuel Type: Diesel
  • Engine & Powertrain
    • Engine Manufacturer: Typically Hyundai supplies its own engines for its forklifts
    • Engine Type: Diesel engine
    • Engine Power: Typically around 100-110 HP
    • Transmission Type: Powershift or automatic
    • Drive Type: 4WD (4 wheel drive)
  • Dimensions
    • Overall Length (Without Forks): Approximately 125-135 inches
    • Overall Width: Approximately 64-67 inches
    • Overall Height: Roughly 109-115 inches
    • Wheelbase: About 78-80 inches
    • Ground Clearance: Roughly 6-8 inches
  • Performance
    • Load Capacity: Around 9,000 lbs
    • Travel Speed: Approximately 15-19 mph
    • Gradeability: Approximately 35-40%
  • Fork Specifications
    • Fork Length: Varies
    • Fork Width: Typically around 5 inches
    • Fork Thickness: Usually 2 inches
  • Tires
    • Tire Type: Pneumatic
    • Number of Tires: 4
    • Tire Size Front: Generally around 8.25-15
    • Tire Size Rear: Typically 7.00-12
  • Operational Features
    • Steering Type: Hydraulic Power Steering
    • Brake Type: Hydraulic Disc or Drum Brakes
    • Safety Features: Generally includes backup alarm, horn, and seatbelt
    • Operator Compartment: Ergonomic design with adjustable seat

2016 Hyundai 40D-9

pneumatic tire 4 wheel sit down diesel

Call for price
 
CONTACT INFO
Name:
Sales Dept.
Phone:

ADDRESS
Select Equipment Sales
6911 8th St
Buena ParkCalifornia 90620
ATTRIBUTES
STOCK #:
U220804
YEAR:
2016
Manufacturer:
MODEL #:
CAPACITY:
9000
FUEL:
MAST TYPE:
MAST HEIGHT:
93 / 130 in
SIDE SHIFTER:
Yes
CONDITION:
Used
UNIT LOCATION:
California [90620]
DESCRIPTION:
Standard 93/130 Mast, 94" Forks, 4 Way, S/S-FP,
POST DATE:
5/27/2026
Reviews
Useful
Not

The Hyundai 40D-9 forklift is a solid choice for anyone needing reliable performance in a busy work environment. I remember using this model in a warehouse where we had to move heavy pallets around all day. It had a surprisingly smooth ride, which made those long shifts a little more bearable. The diesel engine packs enough power to tackle tough jobs without gasping for breath, and the pneumatic tires really do help on uneven surfaces—we encountered plenty of those! It’s not the flashiest forklift out there, but it gets the job done without any fuss. I'd say it's a dependable buddy for any heavy lifting needs.



Review by Mike Thompson (4/15/2025)

  • General Information
    • Model Number: 40D-9
    • Manufacturer: Hyundai
    • Type: Forklift
    • Subtype: Pneumatic Tire 4 Wheel Sit Down
    • Fuel Type: Diesel
  • Engine & Powertrain
    • Engine Manufacturer: Typically Hyundai supplies its own engines for its forklifts
    • Engine Type: Diesel engine
    • Engine Power: Typically around 100-110 HP
    • Transmission Type: Powershift or automatic
    • Drive Type: 4WD (4 wheel drive)
  • Dimensions
    • Overall Length (Without Forks): Approximately 125-135 inches
    • Overall Width: Approximately 64-67 inches
    • Overall Height: Roughly 109-115 inches
    • Wheelbase: About 78-80 inches
    • Ground Clearance: Roughly 6-8 inches
  • Performance
    • Load Capacity: Around 9,000 lbs
    • Travel Speed: Approximately 15-19 mph
    • Gradeability: Approximately 35-40%
  • Fork Specifications
    • Fork Length: Varies
    • Fork Width: Typically around 5 inches
    • Fork Thickness: Usually 2 inches
  • Tires
    • Tire Type: Pneumatic
    • Number of Tires: 4
    • Tire Size Front: Generally around 8.25-15
    • Tire Size Rear: Typically 7.00-12
  • Operational Features
    • Steering Type: Hydraulic Power Steering
    • Brake Type: Hydraulic Disc or Drum Brakes
    • Safety Features: Generally includes backup alarm, horn, and seatbelt
    • Operator Compartment: Ergonomic design with adjustable seat
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.


Call
Get Quote
Equipment Finder Equipment
finder
*All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Please correct the following