Eliftruck
BUY A FORKLIFT SELL A FORKLIFT RENT A FORKLIFT
Overview
Spec Sheet
Shipping/Freight
Equipment Description
OCTANE lifts are built from the best components available in the world! Trusted brand names, such as Cummings, PSI (GM), Nissan, Mitsubishi, Kubota, Doosan, Deutz, Kohler, Cutis, Cascade, Eaton, Spicer, These components combine to provide one of the best values in the material handling industry. Easy to use and maneuver for any user, OCTANE will help you increase productivity and save you money! With a full 1-year Factory Warranty and additional warranty coverage available (up to 5 years/10,000 hours), your OCTANE purchase will inspire years of confidence.
Spec Sheet
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.

  • General Information
    • Model Number: FD50
    • Manufacturer: Octane
    • Type: Forklift
    • Subtype: Pneumatic Tire 4 Wheel Sit Down
    • Fuel Type: Diesel
  • Performance
    • Load Capacity: 11,000 lbs
    • Load Center: 24 inches
    • Travel Speed (Loaded): 12 mph
    • Travel Speed (Unloaded): 14 mph
    • Lifting Speed (Loaded): 89 ft/min
    • Lifting Speed (Unloaded): 100 ft/min
    • Lowering Speed (Loaded): 98 ft/min
    • Lowering Speed (Unloaded): 78 ft/min
  • Dimensions
    • Overall Length: 165 inches
    • Overall Width: 53 inches
    • Overall Height: 105 inches
    • Wheelbase: 91 inches
    • Ground Clearance: 8.5 inches
    • Turning Radius: 112 inches
    • Fork Length: Varies
  • Engine
    • Engine Manufacturer: Mitsubishi
    • Engine Model: S6S
    • Rated Power: 95 HP
    • Number of Cylinders: 6
    • Displacement: 264 cubic inches
  • Tires
    • Front Tires: 8.25 x 15
    • Rear Tires: 8.25 x 15
    • Tire Type: Pneumatic
  • Hydraulic System
    • Hydraulic Tank Capacity: 26 gallons
    • Relief Pressure: 2,500 psi
  • Weight
    • Service Weight: 16,750 lbs

2026 Octane FD50

New

pneumatic tire 4 wheel sit down diesel

Call for price
 
CONTACT INFO
Name:
Sales Dept
Phone:

ADDRESS
Discount Forklift
4905 Lima St
DenverColorado 80239
ATTRIBUTES
STOCK #:
51
YEAR:
2026
Manufacturer:
MODEL #:
CAPACITY:
11000
FUEL:
MAST TYPE:
MAST HEIGHT:
106 / 177 in
CONDITION:
New
HOUR METER:
5
UNIT LOCATION:
Colorado [80239]
POST DATE:
6/2/2026
Reviews
Useful
Not

Having spent a good chunk of my time driving around the FD50, I can confidently say it's a solid beast of a forklift. The diesel engine packs a punch and really helps when you’re lifting heavier loads, especially on the warehouse floor where I work. It handled the tight corners surprisingly well, which is key when you’re trying to squeeze between racks. There was this one afternoon when we got a bit overloaded with pallets, and the FD50 just powered through without a hitch. It’s also nice not having to worry too much about maintenance; it’s been reliable since day one. Overall, it’s been a good addition to our fleet.



Review by Jake Thompson (2/2/2026)

  • General Information
    • Model Number: FD50
    • Manufacturer: Octane
    • Type: Forklift
    • Subtype: Pneumatic Tire 4 Wheel Sit Down
    • Fuel Type: Diesel
  • Performance
    • Load Capacity: 11,000 lbs
    • Load Center: 24 inches
    • Travel Speed (Loaded): 12 mph
    • Travel Speed (Unloaded): 14 mph
    • Lifting Speed (Loaded): 89 ft/min
    • Lifting Speed (Unloaded): 100 ft/min
    • Lowering Speed (Loaded): 98 ft/min
    • Lowering Speed (Unloaded): 78 ft/min
  • Dimensions
    • Overall Length: 165 inches
    • Overall Width: 53 inches
    • Overall Height: 105 inches
    • Wheelbase: 91 inches
    • Ground Clearance: 8.5 inches
    • Turning Radius: 112 inches
    • Fork Length: Varies
  • Engine
    • Engine Manufacturer: Mitsubishi
    • Engine Model: S6S
    • Rated Power: 95 HP
    • Number of Cylinders: 6
    • Displacement: 264 cubic inches
  • Tires
    • Front Tires: 8.25 x 15
    • Rear Tires: 8.25 x 15
    • Tire Type: Pneumatic
  • Hydraulic System
    • Hydraulic Tank Capacity: 26 gallons
    • Relief Pressure: 2,500 psi
  • Weight
    • Service Weight: 16,750 lbs
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.


Freight & Delivery Estimation

Need this equipment delivered to your job site or facility? Run our free freight calculator to compare carrier transit times and estimated rates tailored to this unit's exact weight and dimensions.

Calculate Rates
Preloads equipment specs & location automatically | Instant estimate • No registration required
Call
Get Quote
Equipment Finder Equipment
finder
*All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Please correct the following