Eliftruck
BUY A FORKLIFT SELL A FORKLIFT RENT A FORKLIFT
Overview
Spec Sheet
Shipping/Freight
Equipment Description
Canopy, CAT 3208 Diesel Side Shift Fork Positioner 46000 LBS max Lift 17' Max Lift Height 16' Resting Mast Height.
Spec Sheet
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.

  • Model Number: AH40
  • Manufacturer: Caterpillar (Cat)
  • Type: Forklift
  • Subtype: Pneumatic Tire 4 Wheel Sit Down
  • Fuel Type: Diesel
  • Engine Specifications:
    • Type: Diesel Engine
    • Power: 74 horsepower
    • Displacement: 203 cubic inches
  • Performance:
    • Load Capacity: 8,000 lbs
    • Travel Speed (loaded): 13 mph
    • Gradeability (loaded): 25%
  • Dimensions:
    • Overall Length: 153 inches
    • Overall Width: 54 inches
    • Overall Height (cab): 92 inches
    • Turning Radius: 98 inches
  • Chassis:
    • Tires: Pneumatic
    • Brakes: Hydraulic
  • Hydraulic System:
    • System Type: Load Sensing
    • Hydraulic Tank Capacity: 15 gallons
  • Operator Comfort:
    • Seat Type: Fully Adjustable Suspension Seat
    • Steering: Power Steering
    • Controls: Finger Tip Controls

Cat AH40

pneumatic tire 4 wheel sit down diesel

$59,000 USD
 
Instant Quote Eligible Listing - CLICK HERE!
CONTACT INFO
Name:
Jim Gagliardi
Phone:

ADDRESS
National Equipment, LLC
12201 Hwy 99 (at Ave 12)
MaderaCalifornia 93638
ATTRIBUTES
STOCK #:
9214
Manufacturer:
MODEL #:
CAPACITY:
46000
FUEL:
MAST TYPE:
SERIAL #:
85R123
SIDE SHIFTER:
Yes
CONDITION:
Used
UNIT LOCATION:
California [93638]
POST DATE:
7/1/2026
Reviews
Useful
Not

The Cat AH40 forklift is a solid machine to have on the job. I remember when we used it for a warehouse project last summer, and it really proved its worth. The diesel engine packs a punch, making it easy to lift heavy loads without a hitch. A buddy of mine who operates forklifts often said he'd trust this one for any tough tasks we faced. Its pneumatic tires gave us great stability, and working on uneven surfaces felt safer than with other forklifts I've used in the past. Overall, it's reliable and gets the job done without any fuss.



Review by Mike Thompson (10/2/2025)

  • Model Number: AH40
  • Manufacturer: Caterpillar (Cat)
  • Type: Forklift
  • Subtype: Pneumatic Tire 4 Wheel Sit Down
  • Fuel Type: Diesel
  • Engine Specifications:
    • Type: Diesel Engine
    • Power: 74 horsepower
    • Displacement: 203 cubic inches
  • Performance:
    • Load Capacity: 8,000 lbs
    • Travel Speed (loaded): 13 mph
    • Gradeability (loaded): 25%
  • Dimensions:
    • Overall Length: 153 inches
    • Overall Width: 54 inches
    • Overall Height (cab): 92 inches
    • Turning Radius: 98 inches
  • Chassis:
    • Tires: Pneumatic
    • Brakes: Hydraulic
  • Hydraulic System:
    • System Type: Load Sensing
    • Hydraulic Tank Capacity: 15 gallons
  • Operator Comfort:
    • Seat Type: Fully Adjustable Suspension Seat
    • Steering: Power Steering
    • Controls: Finger Tip Controls
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.


Freight & Delivery Estimation

Need this equipment delivered to your job site or facility? Run our free freight calculator to compare carrier transit times and estimated rates tailored to this unit's exact weight and dimensions.

Calculate Rates
Preloads equipment specs & location automatically | Instant estimate • No registration required
Call
Get Quote
Equipment Finder Equipment
finder
*All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Please correct the following