Eliftruck
BUY A FORKLIFT SELL A FORKLIFT RENT A FORKLIFT
Overview
Spec Sheet
Shipping/Freight
Equipment Description
2014 used MITSUBISHI FD50N1 for sale. Global has over 2000 pieces of used equipment in stock. Inquire today about Stock #GU003991, Stock Number: GU003991, Make: MITSUBISHI, Model: FD50N1, Year: 2014, Auxilliary Hydralic Valves: 0, Capacity: 11000 Lbs, Carriage: S/S, Carriage Width: 0.00", Fork Length: 0.00", Fork Taper: Pallet, Fork Thickness: 0.00", Full Free Height: 0.00", Load Center: 24", Mast: Triplex, Max Fork Height: 189.00", Overall Lowered Height: 94.00", Operator Protection: Open Overhead Guard, Hours: 2050, Chassis: 2 Wheel Drive, Fuel: Diesel
Spec Sheet
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.

  • General Information
    • Model Number: FD50N1
    • Manufacturer: Mitsubishi
    • Type: Forklift
    • Subtype: Pneumatic Tire 4 Wheel Sit Down
    • Fuel Type: Diesel
  • Performance
    • Load Capacity: 11,000 lbs
    • Travel Speed: approx. 12.5 mph (without load)
    • Lift Speed: varies depending on load
    • Gradeability: approx. 43% (without load)
  • Dimensions
    • Overall Length: approx. 145 inches (without forks)
    • Overall Width: approx. 58.5 inches
    • Overall Height: approx. 105 inches (to top of overhead guard)
    • Wheelbase: approx. 89 inches
    • Ground Clearance: approx. 8.5 inches
  • Tires
    • Type: Pneumatic
    • Front Tire Size: 8.25-15-14PR
    • Rear Tire Size: 8.25-15-14PR
  • Engine
    • Engine Manufacturer: Mitsubishi
    • Engine Model: S6S Tier 2 Diesel
    • Cylinders: 6
    • Engine Power: approx. 84 HP
    • Displacement: approx. 255 cubic inches
  • Hydraulic System
    • Hydraulic Pressure: approx. 2,460 psi
    • Hydraulic Tank Capacity: approx. 20 gallons
  • Capacity
    • Fuel Tank Capacity: approx. 21 gallons

2014 Mitsubishi FD50N1

pneumatic tire 4 wheel sit down diesel

$35,000 USD
 
Instant Quote Eligible Listing - CLICK HERE!
CONTACT INFO
Name:
Sales Rep

ADDRESS
Global Fleet Solutions
17300 W Valley Hwy
Seattle, Washington 98188
ATTRIBUTES
STOCK #:
GU003991
YEAR:
2014
Manufacturer:
MODEL #:
CAPACITY:
11000
FUEL:
MAST TYPE:
MAST HEIGHT:
189 in
SERIAL #:
AF19E80044
UNIT LOCATION:
DESCRIPTION:
2050 Hours
POST DATE:
10/10/2026
Reviews
Useful
Not

I've had the chance to use the Mitsubishi FD50N1, and I have to say, it's become a go-to on the job site. The diesel engine gives it that reliable power you need for a full day of heavy lifting without needing constant refuels. A few weeks back, we had an unusually busy day, and this forklift handled the load like a champ. It's pretty nimble for its size, which was a big plus when navigating through tight warehouse aisles. Overall, it’s definitely a solid piece of equipment that has proven itself in real work settings.



Review by Jake Thompson (8/10/2025)

  • General Information
    • Model Number: FD50N1
    • Manufacturer: Mitsubishi
    • Type: Forklift
    • Subtype: Pneumatic Tire 4 Wheel Sit Down
    • Fuel Type: Diesel
  • Performance
    • Load Capacity: 11,000 lbs
    • Travel Speed: approx. 12.5 mph (without load)
    • Lift Speed: varies depending on load
    • Gradeability: approx. 43% (without load)
  • Dimensions
    • Overall Length: approx. 145 inches (without forks)
    • Overall Width: approx. 58.5 inches
    • Overall Height: approx. 105 inches (to top of overhead guard)
    • Wheelbase: approx. 89 inches
    • Ground Clearance: approx. 8.5 inches
  • Tires
    • Type: Pneumatic
    • Front Tire Size: 8.25-15-14PR
    • Rear Tire Size: 8.25-15-14PR
  • Engine
    • Engine Manufacturer: Mitsubishi
    • Engine Model: S6S Tier 2 Diesel
    • Cylinders: 6
    • Engine Power: approx. 84 HP
    • Displacement: approx. 255 cubic inches
  • Hydraulic System
    • Hydraulic Pressure: approx. 2,460 psi
    • Hydraulic Tank Capacity: approx. 20 gallons
  • Capacity
    • Fuel Tank Capacity: approx. 21 gallons
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.

Freight & Delivery Estimation

Ships from: Seattle, Washington

Need this equipment delivered to your facility or job site? Run our instant calculator to compare competitive carrier rates based on this unit's exact specs.

Calculate Rates Instant estimate • Free
Eliftruck Freight Transport Semi
Specs pre-loaded Flatbed & RGN options Door-to-door delivery
Call
Get Quote
Equipment Finder Equipment
finder
*All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Please correct the following