Eliftruck
BUY A FORKLIFT SELL A FORKLIFT RENT A FORKLIFT
Overview
Spec Sheet
Shipping/Freight
Equipment Description
2015 Mitsubishi FG50NGLE forklift equipped with LPG power, side shift, and a three-stage mast. A capable, versatile machine ready to work.
Spec Sheet
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.

  • General Specifications
    • Model Number: FG50N
    • Manufacturer: Mitsubishi
    • Type: Forklift
    • Fuel Type: LP Gas
  • Performance
    • Load Capacity: 10,000 lbs
    • Engine Power: Approx. 100 HP
    • Travel Speed: Approximately 12 mph
    • Turning Radius: 8.5 ft
  • Dimensions
    • Length to Fork Face: 10.5 ft
    • Overall Width: 4.5 ft
    • Overall Height: 8.6 ft
    • Wheelbase: 7.8 ft
    • Ground Clearance: 9.8 inches
  • Weights
    • Service Weight: 16,000 lbs
    • Axle Load with Load Front: Approx. 23,000 lbs
    • Axle Load with Load Rear: Approx. 3,000 lbs
  • Chassis
    • Tire Type: Pneumatic
    • Tire Size Front: 8.25-15-14PR
    • Tire Size Rear: 8.25-15-14PR
    • Service Brake: Hydraulic
  • Forks
    • Fork Length: Varies
    • Fork Width: 6 inches
    • Fork Thickness: 2 inches

2015 Mitsubishi FG50N

pneumatic tire 4 wheel sit down lp gas

$31,995 USD
 
Instant Quote Eligible Listing - CLICK HERE!
CONTACT INFO
Name:
Sales Dept.
Phone:

ADDRESS
Supreme Forklift & Equipment
25250 S Power Rd
Queen CreekArizona 85142
ATTRIBUTES
STOCK #:
SFE-26-0006
YEAR:
2015
Manufacturer:
MODEL #:
CAPACITY:
11000
FUEL:
MAST TYPE:
SIDE SHIFTER:
Yes
CONDITION:
Used
HOUR METER:
2000
UNIT LOCATION:
Arizona [85142]
DESCRIPTION:
FINANCING AVAILABLE
POST DATE:
9/18/2026
Reviews
Useful
Not

The Mitsubishi FG50N forklift has been my go-to for heavy lifting at the warehouse ever since we brought it in. It's got that solid feel you want when you're hauling around pallets of goods, and the LP gas engine really packs a punch without feeling like you’re driving a tank. There’s something satisfying about how easily it maneuvers—especially when you have a tight space to navigate, which brings back memories of squeezing my old pickup into that cramped parking lot at the county fair. If you're on the fence about this model, I’d say it’s definitely worth considering for getting the job done efficiently.



Review by Jake Thompson (6/18/2025)

  • General Specifications
    • Model Number: FG50N
    • Manufacturer: Mitsubishi
    • Type: Forklift
    • Fuel Type: LP Gas
  • Performance
    • Load Capacity: 10,000 lbs
    • Engine Power: Approx. 100 HP
    • Travel Speed: Approximately 12 mph
    • Turning Radius: 8.5 ft
  • Dimensions
    • Length to Fork Face: 10.5 ft
    • Overall Width: 4.5 ft
    • Overall Height: 8.6 ft
    • Wheelbase: 7.8 ft
    • Ground Clearance: 9.8 inches
  • Weights
    • Service Weight: 16,000 lbs
    • Axle Load with Load Front: Approx. 23,000 lbs
    • Axle Load with Load Rear: Approx. 3,000 lbs
  • Chassis
    • Tire Type: Pneumatic
    • Tire Size Front: 8.25-15-14PR
    • Tire Size Rear: 8.25-15-14PR
    • Service Brake: Hydraulic
  • Forks
    • Fork Length: Varies
    • Fork Width: 6 inches
    • Fork Thickness: 2 inches
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.

Freight & Delivery Estimation

Ships from: Queen Creek, Arizona

Need this equipment delivered to your facility or job site? Run our instant calculator to compare competitive carrier rates based on this unit's exact specs.

Calculate Rates Instant estimate • Free
Eliftruck Freight Transport Semi
Specs pre-loaded Flatbed & RGN options Door-to-door delivery
Origin Map
Call
Get Quote
Equipment Finder Equipment
finder
*All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Please correct the following