Eliftruck
BUY A FORKLIFT SELL A FORKLIFT RENT A FORKLIFT
Overview
Spec Sheet
Shipping/Freight
Equipment Description
Nissan Cushion Tire Forklift – 5,000 lb Capacity Specifications: Capacity: 6,000 lbs Hours: 8,734 Max Lift Height: 187" Fork Length: 42" PQL: 231386 Side shift Additional: Tank available Delivery available Rental available
Spec Sheet
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.

  • Model Number: MCUL02A30LV
  • Manufacturer: Nissan
  • Type: Forklift
  • Fuel Type Used: LP Gas
  • Capacity: 6,000 lbs
  • Engine Details:
    • Engine Type: Internal Combustion
    • Engine Model: K21 (or similar, specific model varies)
    • Power: Approximately 50-60 HP
  • Performance:
    • Travel Speed: Approximately 11-12 mph
    • Lifting Speed: Varies depending on load
    • Gradeability: Up to 20% under load
  • Dimensions:
    • Overall Length: Approximately 145 inches
    • Overall Width: Approximately 45 inches
    • Wheelbase: Approximately 86 inches
    • Turning Radius: Approximately 96 inches
  • Weight:
    • Forklift Weight: Approximately 11,000 lbs
  • Tires:
    • Tire Type: Pneumatic or cushion (varies by configuration)
    • Front Tire Size: Typically 7.00-12 or similar
    • Rear Tire Size: Typically 6.00-9 or similar
  • Hydraulics:
    • Hydraulic System Pressure: Approximately 2,500 psi
  • Forks:
    • Fork Length: Varies
    • Fork Width: Approximately 4 inches
    • Fork Thickness: Approximately 1.5 inches
  • Other Features:
    • Operator Seat: Adjustable with safety features
    • Control Type: Lever or joystick (depending on model)

2005 Nissan MCUL02A30LV

cushion tire 4 wheel sit down (indoor warehouse) lp gas

$7,250 USD
 
Instant Quote Eligible Listing - CLICK HERE!
CONTACT INFO
Name:
James McCallum
Phone:

ADDRESS
Concord Equipment
4890 E Nevada Ave
DetroitMichigan 48234
ATTRIBUTES
STOCK #:
PQL-231386
YEAR:
2005
Manufacturer:
MODEL #:
CAPACITY:
6000
FUEL:
MAST TYPE:
MAST HEIGHT:
187 in
SIDE SHIFTER:
Yes
CONDITION:
Used
HOUR METER:
8734
UNIT LOCATION:
Michigan [48234]
POST DATE:
8/26/2026
Reviews
Useful
Not

The Nissan MCUL02A30LV forklift is a reliable workhorse, especially when it comes to navigating tight spaces. I remember using it during a busy period at our warehouse; it really saved the day while we were trying to manage a last-minute shipment. The LP gas fuel system offers decent efficiency, and I found it surprisingly easy to operate, even for someone who isn’t a pro behind the wheel. It might not have all the bells and whistles like some of the newer models, but for day-to-day tasks, you can count on it to get the job done without a hitch. Definitely a solid choice for anyone in the market.



Review by Mike Thompson (3/26/2025)

  • Model Number: MCUL02A30LV
  • Manufacturer: Nissan
  • Type: Forklift
  • Fuel Type Used: LP Gas
  • Capacity: 6,000 lbs
  • Engine Details:
    • Engine Type: Internal Combustion
    • Engine Model: K21 (or similar, specific model varies)
    • Power: Approximately 50-60 HP
  • Performance:
    • Travel Speed: Approximately 11-12 mph
    • Lifting Speed: Varies depending on load
    • Gradeability: Up to 20% under load
  • Dimensions:
    • Overall Length: Approximately 145 inches
    • Overall Width: Approximately 45 inches
    • Wheelbase: Approximately 86 inches
    • Turning Radius: Approximately 96 inches
  • Weight:
    • Forklift Weight: Approximately 11,000 lbs
  • Tires:
    • Tire Type: Pneumatic or cushion (varies by configuration)
    • Front Tire Size: Typically 7.00-12 or similar
    • Rear Tire Size: Typically 6.00-9 or similar
  • Hydraulics:
    • Hydraulic System Pressure: Approximately 2,500 psi
  • Forks:
    • Fork Length: Varies
    • Fork Width: Approximately 4 inches
    • Fork Thickness: Approximately 1.5 inches
  • Other Features:
    • Operator Seat: Adjustable with safety features
    • Control Type: Lever or joystick (depending on model)
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.


Call
Get Quote
Equipment Finder Equipment
finder
Please correct the following