Eliftruck
BUY A FORKLIFT SELL A FORKLIFT RENT A FORKLIFT
Overview
Spec Sheet
Shipping/Freight
Equipment Description
Call or Text: Tyler (260) 413-8140 for fastest response! 2019 Hyundai 25L-7M -5,000 LB Capacity -Pneumatic Tires -LP Fuel -Three Stage Mast (85" Lowered / 185" Raised) -Side Shift -Good Tires -JUST 1,200 HOURS! Really nice Hyundai. Very very low hours. Nice tires on it and it comes with 72" forks. This lift is ready to go and only show signs of little use. It's hard to find lifts with this low of hours, get it before it goes! Nationwide delivery available, reach out with any questions!
Spec Sheet
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.

  • Model Number: 25L-7M
  • Manufacturer: Hyundai
  • Type: Forklift
  • Subtype: Pneumatic Tire 4 Wheel Sit Down
  • Fuel Type: LP Gas
  • Dimensions
    • Overall Length (with forks): varies
    • Overall Width: Approximately 48 inches
    • Overall Height (cab): Approximately 83 inches
    • Wheelbase: Approximately 65 inches
    • Ground Clearance: Approximately 5 inches
  • Weight
    • Operating Weight: Approximately 8,380 lbs
  • Performance
    • Load Capacity: 5,000 lbs
    • Travel Speed (laden/unladen): Approximately 11/12 mph
    • Lift Speed (laden/unladen): Approximately 78/90 feet per minute
    • Gradeability (laden/unladen): Approximately 29%/20%
  • Engine
    • Engine Model: K25
    • Engine Type: LPG, 4-cylinder
    • Displacement: Approximately 2.5 liters
    • Power: Approximately 59 horsepower
  • Tires
    • Type: Pneumatic
    • Front Tires: Approximately 7.00-12
    • Rear Tires: Approximately 6.00-9
  • Brakes
    • Service Brake: Hydraulic
    • Parking Brake: Mechanical Lever
  • Transmission
    • Type: Powershift
    • Number of Gears: 1 forward, 1 reverse

2019 Hyundai 25L-7M

pneumatic tire 4 wheel sit down lp gas

$14,900 USD
 
Instant Quote Eligible Listing - CLICK HERE!
CONTACT INFO
Name:
Mike
Phone:

ADDRESS
Sun Equipment Inc
3517 Cantwell Blvd
Ft Wayne Indiana 46819
ATTRIBUTES
STOCK #:
45981
YEAR:
2019
Manufacturer:
MODEL #:
CAPACITY:
5000
FUEL:
MAST TYPE:
MAST HEIGHT:
85 / 185 in
SIDE SHIFTER:
Yes
CONDITION:
Used
HOUR METER:
1200
UNIT LOCATION:
Texas [75033]
DESCRIPTION:
Call or Text: Tyler (260) 413-8140 for fastest response!
POST DATE:
8/25/2026
Reviews
Useful
Not

Having spent some time working with the Hyundai 25L-7M forklift, I can say it’s a solid piece of machinery for folks who need reliability on the job site. I remember moving heavy pallets around in a warehouse and appreciating how maneuverable it felt, especially in tight spaces. The LP gas fuel made it efficient, which was a plus during long shifts. It's quiet but still packs a punch when you need to lift heavier loads. Overall, it’s performed well for both my co-workers and me, helping keep productivity up without much hassle. Definitely a dependable option if you need a good sit-down forklift.



Review by Jake Anderson (12/26/2025)

  • Model Number: 25L-7M
  • Manufacturer: Hyundai
  • Type: Forklift
  • Subtype: Pneumatic Tire 4 Wheel Sit Down
  • Fuel Type: LP Gas
  • Dimensions
    • Overall Length (with forks): varies
    • Overall Width: Approximately 48 inches
    • Overall Height (cab): Approximately 83 inches
    • Wheelbase: Approximately 65 inches
    • Ground Clearance: Approximately 5 inches
  • Weight
    • Operating Weight: Approximately 8,380 lbs
  • Performance
    • Load Capacity: 5,000 lbs
    • Travel Speed (laden/unladen): Approximately 11/12 mph
    • Lift Speed (laden/unladen): Approximately 78/90 feet per minute
    • Gradeability (laden/unladen): Approximately 29%/20%
  • Engine
    • Engine Model: K25
    • Engine Type: LPG, 4-cylinder
    • Displacement: Approximately 2.5 liters
    • Power: Approximately 59 horsepower
  • Tires
    • Type: Pneumatic
    • Front Tires: Approximately 7.00-12
    • Rear Tires: Approximately 6.00-9
  • Brakes
    • Service Brake: Hydraulic
    • Parking Brake: Mechanical Lever
  • Transmission
    • Type: Powershift
    • Number of Gears: 1 forward, 1 reverse
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.


Call
Get Quote
Equipment Finder Equipment
finder
Please correct the following