Eliftruck
BUY A FORKLIFT SELL A FORKLIFT RENT A FORKLIFT
Overview
Spec Sheet
Shipping/Freight
Equipment Description
2023 used NISSAN MCP1F1A18LV for sale. Global has over 2000 pieces of used equipment in stock. Inquire today about Stock #LS20684, Stock Number: LS20684, Make: NISSAN, Model: MCP1F1A18LV, Year: 2023, Auxilliary Hydralic Valves: 3, Capacity: 3500 Lbs, Carriage: S/S, Fork Length: 48.00", Full Free Height: 0.00", Load Center: 24", Mast: Triplex, Max Fork Height: 187.00", Overall Lowered Height: 83.00", Rear Tires: Cushion, Hours: 0, Chassis: 2 Wheel Drive, Fuel: LP
Spec Sheet
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.

  • General Specifications
    • Model Number: MCP1F1A18LV
    • Manufacturer: Nissan
    • Type: Forklift
    • Subtype: Cushion Tire 4 Wheel Sit Down
    • Application: Indoor Warehouse
  • Dimensions
    • Overall Length: 84 inches (excluding forks)
    • Overall Width: 42 inches
    • Height to Top of Overhead Guard: 84 inches
    • Wheelbase: 57 inches
    • Ground Clearance: 3.5 inches
  • Weight
    • Service Weight: Approx. 7,200 lbs
  • Powertrain
    • Engine: Internal Combustion
    • Fuel Type: LPG
    • Engine Power: 37 HP
    • Transmission: Automatic
  • Performance
    • Load Capacity: 3,500 lbs
    • Travel Speed: 11 mph
    • Lift Speed: 59 feet per minute
    • Gradeability: 20% (no load)
  • Wheels and Tires
    • Front Tires: Cushion
    • Rear Tires: Cushion
    • Tire Size Front: 18x6x12.125 inches
    • Tire Size Rear: 16x5x10.5 inches
  • Forks
    • Fork Length: Varies
    • Fork Thickness: 1.6 inches
    • Fork Width: 3.9 inches
    • Fork Spread: 9.4-37.0 inches
  • Electrical System
    • System Voltage: 12V
    • Battery Capacity: 55 Ah
  • Hydraulics
    • Hydraulic System Type: Open Center
    • Hydraulic Pressure: 2,800 psi

2023 Nissan MCP1F1A18LV

cushion tire 4 wheel sit down (indoor warehouse) lp gas

Call for price
 
CONTACT INFO
Name:
Sales Rep

ADDRESS
Global Fleet Solutions
17300 W Valley Hwy
SeattleWashington 98188
ATTRIBUTES
STOCK #:
LS20684
YEAR:
2023
Manufacturer:
MODEL #:
CAPACITY:
3500
FUEL:
MAST TYPE:
MAST HEIGHT:
187 in
SERIAL #:
CP1F1-9N25143
UNIT LOCATION:
DESCRIPTION:
0 Hours
POST DATE:
8/21/2026
Reviews
Useful
Not

The Nissan MCP1F1A18LV forklift has been a solid addition to our warehouse operations. I've spent quite a few hours operating it, and it really shines when it comes to maneuverability in tight spaces. The cushion tires offer a nice balance of stability and agility, making it easier to navigate around racks without feeling like you're constantly on edge. One time, while lifting a pretty heavy load, the forklift responded smoothly without any hiccups, which was a relief—I really didn't want to mess around with a wobbling load. Overall, it gets the job done efficiently without lots of fuss and drama.



Review by Jake Thompson (1/21/2026)

  • General Specifications
    • Model Number: MCP1F1A18LV
    • Manufacturer: Nissan
    • Type: Forklift
    • Subtype: Cushion Tire 4 Wheel Sit Down
    • Application: Indoor Warehouse
  • Dimensions
    • Overall Length: 84 inches (excluding forks)
    • Overall Width: 42 inches
    • Height to Top of Overhead Guard: 84 inches
    • Wheelbase: 57 inches
    • Ground Clearance: 3.5 inches
  • Weight
    • Service Weight: Approx. 7,200 lbs
  • Powertrain
    • Engine: Internal Combustion
    • Fuel Type: LPG
    • Engine Power: 37 HP
    • Transmission: Automatic
  • Performance
    • Load Capacity: 3,500 lbs
    • Travel Speed: 11 mph
    • Lift Speed: 59 feet per minute
    • Gradeability: 20% (no load)
  • Wheels and Tires
    • Front Tires: Cushion
    • Rear Tires: Cushion
    • Tire Size Front: 18x6x12.125 inches
    • Tire Size Rear: 16x5x10.5 inches
  • Forks
    • Fork Length: Varies
    • Fork Thickness: 1.6 inches
    • Fork Width: 3.9 inches
    • Fork Spread: 9.4-37.0 inches
  • Electrical System
    • System Voltage: 12V
    • Battery Capacity: 55 Ah
  • Hydraulics
    • Hydraulic System Type: Open Center
    • Hydraulic Pressure: 2,800 psi
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.


Call
Get Quote
Equipment Finder Equipment
finder
*All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Please correct the following