Eliftruck
BUY A FORKLIFT SELL A FORKLIFT RENT A FORKLIFT
Overview
Spec Sheet
Shipping/Freight
Equipment Description
5,000lb capacity, 4x4 with locking rear differential, 48" forks, pneumatic tires, diesel powered Kubota engine. Good luck getting stuck no matter where you are working in this one!
Spec Sheet
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.

  • General Specifications
    • Model Number: RT25
    • Manufacturer: Hangcha
    • Type: Forklift
    • Subtype: Rough Terrain (Vertical Mast)
    • Fuel Type: Diesel
  • Dimensions
    • Overall Length: Approximately 11.3 ft
    • Overall Width: Approximately 4.9 ft
    • Height to Top of Overhead Guard: Approximately 8.3 ft
  • Engine Specifications
    • Engine Type: Diesel
    • Power Output: Approximately 74 HP
    • Engine Displacement: Approximately 179 cubic inches
    • Number of Cylinders: 4
    • Cooling System: Water-cooled
  • Performance
    • Load Capacity: 5,500 lbs
    • Travel Speed (Loaded): Approximately 15 mph
    • Gradeability (Loaded): 30%
  • Chassis
    • Drive Axle: 4x4
    • Steering: Hydraulic Power Steering
    • Tire Type: Pneumatic, Rough Terrain
  • Hydraulics
    • Pump Type: Gear Pump
    • Hydraulic Pressure: Approximately 3,625 psi
  • Capacity
    • Fuel Tank Capacity: Approximately 23 gallons
    • Hydraulic Tank Capacity: Approximately 16.4 gallons
  • Additional Features
    • Enclosed Operator Cabin: Optional
    • Adjustable Seat: Yes
    • Lighting System: Front and Rear Work Lights
    • Backup Alarm: Included

2026 Hangcha RT25

New

rough terrain (vertical mast) diesel

$58,995 USD
 
Instant Quote Eligible Listing - CLICK HERE!
CONTACT INFO
Name:
Rod Kleiber
Phone:

ADDRESS
Forklift Management Specialists, LLC
5511 Stewart Ave
WausauWisconsin 54401
ATTRIBUTES
STOCK #:
A1109
YEAR:
2026
Manufacturer:
MODEL #:
CAPACITY:
5000
FUEL:
MAST TYPE:
MAST HEIGHT:
93 / 185 in
SERIAL #:
19BD01116
SIDE SHIFTER:
Yes
CONDITION:
New
HOUR METER:
2
UNIT LOCATION:
Wisconsin [54401]
DESCRIPTION:
4x4 with locking rear differential! Work year round!
POST DATE:
8/20/2026
Reviews
Useful
Not

The Hangcha RT25 forklift is quite the reliable workhorse for tackling tough terrains, and I found it to be especially useful on my friend's construction site where uneven ground is a daily challenge. With its robust diesel engine, it really chews through the heavier loads without breaking a sweat. I remember watching the crew maneuvering pallets of heavy materials through mud and rocks, and this forklift just plowed right through it, smoothly lifting and delivering without a hitch. You can tell it’s designed for rough conditions without sacrificing on control or stability. Overall, if you need something sturdy that doesn’t back down from a challenge, this model is a solid choice.



Review by Jake Thompson (2/21/2026)

  • General Specifications
    • Model Number: RT25
    • Manufacturer: Hangcha
    • Type: Forklift
    • Subtype: Rough Terrain (Vertical Mast)
    • Fuel Type: Diesel
  • Dimensions
    • Overall Length: Approximately 11.3 ft
    • Overall Width: Approximately 4.9 ft
    • Height to Top of Overhead Guard: Approximately 8.3 ft
  • Engine Specifications
    • Engine Type: Diesel
    • Power Output: Approximately 74 HP
    • Engine Displacement: Approximately 179 cubic inches
    • Number of Cylinders: 4
    • Cooling System: Water-cooled
  • Performance
    • Load Capacity: 5,500 lbs
    • Travel Speed (Loaded): Approximately 15 mph
    • Gradeability (Loaded): 30%
  • Chassis
    • Drive Axle: 4x4
    • Steering: Hydraulic Power Steering
    • Tire Type: Pneumatic, Rough Terrain
  • Hydraulics
    • Pump Type: Gear Pump
    • Hydraulic Pressure: Approximately 3,625 psi
  • Capacity
    • Fuel Tank Capacity: Approximately 23 gallons
    • Hydraulic Tank Capacity: Approximately 16.4 gallons
  • Additional Features
    • Enclosed Operator Cabin: Optional
    • Adjustable Seat: Yes
    • Lighting System: Front and Rear Work Lights
    • Backup Alarm: Included
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.


Call
Get Quote
Equipment Finder Equipment
finder
Please correct the following